KVR 2.1v.. will try some more timing later...

tight it a little more.. 2.1v
not 400.. it's 430..

anybody has experience oc corsair value select 667mhz ?i want to know how far it can go..thx..

coz my area damn hard to find the ram cooler, have to buy from lyn bulker i think, the one moderno selling cost RM60
is there any cheaper alternative out there?

guys, i would be getting the ballistix sooner or later, pc26400 800MHz.

jus wanna ask, is it safe to set Vdimm for this ram to 2.2V? somehow i feel like 2.2V is a little too high and probably could damage the RAM.. anyone can clarify this, as well as state the best Vdimm for this RAM? Thanx in advance..

where to find this allngap ram cooler? got in garage sale or bulk sale? how much ah? can guide me?

btw, i tot your d9gkx can oc above 1200? Since that day you tried to lecture me about that.
Quite a dissapointment to know that actually your d9gkx can't even reach 1100

most probably is your ram chipset problem, friend
already reach the limit
btw,nowadays 2 ram sticks also cannot reach 1100?

for amd, ram timings or mhz more important?
I know a mixture would be the ideal.
But comparing between 848@4-4-4-12 and 990@5-5-5-12

im using kingston value ram 1GBX2 DDR2 800Mhz oc to 860Mhz
currently i set the timing to 4,4,4,12 with 2V, so far running prime 95 for 1 hour no problem
any of you guys experienced this ram before??
just wanna know how far can the ram go

r u sure rm 395 can get 10th anni?? 1GB or 2 GB??
cause even KVR 800Mhz ady cost Rm 150 for 1 GB

mine 2.0 vdim 4-4-4-12 900mhz

why too low?? put it at 1100 la..hehe

10th alredi hv heatspreader.. can tahan ma..

active cooling is the answer...

bro, have u tried lowering the vdimm... crucial usually need lower vdimm to operate at 1000mhz compare to other brands... n it's usual dat crucial heat spreader is a bit hotter too... u might need ram cooler (fans) too... 

Anyone here using kingston value ram 667? Just wanna ask, why my ram doesnt read as 333 MHz speed in cpu-z, instead it reads 299.4Mhz. Why????(i loaded optimized default in bios for my default setting)