Both Crucial Ballistix and Ballistix Tracer are using D9GMH.

got a noob question. What kind of chipset does the Aeneon DDR2 800 uses? and is there any d9gmh 1G ddr2 which cost around RM80? i mean in the value segment?

i don't think u can find any d9gmh around Rm80 more.

No.

got one in pc zone price list, Team Value DDR2 667MHz, is it using d9gmh? it cost RM85.

Who told you it's using D9GMH? LOL.
No Team Valueram DDR2 rams ever use Micron D9GMH la dude.

LOL..There USED to be one. The one and only. The Kingbox Ram that was on sale at Bulk Section before until the supplier decided to jack up the price. If not, bro sHawTY would be OCing that ram kaw kaw now..

value ram u might be able to find GMH if u lucky enough

Ballistix DDR2 Pc2-6400 (2.2V) 800 @ 4-4-4-12 [Micron BT-37E, B6-37E, B6-25F]


edit : i mean...normally how far this ram

This post has been edited by dj.eRicZzz: Dec 18 2007, 01:53 AM

how bout ProMOS chipset? anyone have it?

It's good, but not as good as Micron D9GMH / D9GKX / D9GCT.

Let's just say it's on the 2nd level.

Guys check with you, I am running Corsair Twin2X 6400 (1gbX2) at CL5 @ 472.5mhz (1.9V). I guess the ram is same as its brother running at CL4 (2.1v).

Is it worth it to test this out? Should I run at CL4 400mhz or CL5 472.5mhz? Please advise.

User of Corsair XMS2 Twin RAMS - Need your help
Brows to this topic & I need your feedback
http://forum.lowyat.net/topic/593118

Thank you.

***Latest update***
The distributer called & wave the RMA service charges & admit that each twin module pair have different serial number & they only scan 1 unit of the RAM for each pair , that explain why the serial number are not listed in their database.

Happy Ending...


capriodimitri
ref to this URL http://www.houseofhelp.com/v2/showthread.php?t=52351
Testing parameters for Twinx/XMS2-6400:
Twin2x1024A-6400 Data Sheet
Twin2x2048-6400 Data Sheet

Motherboard make and model: Asus M2N32-SLI Premium/Deluxe
Each pair is tested and packaged together using the following settings:
AI Over Clock Tuner: Manual
CPU External Frequency: Manually set to 200MHz
DDR2 SDRAM Clock: Manually set to 800MHz
PCI Express Freq: Auto
PCI Freq: 33.33
Performance Mode: Standard
DRAM Timing Selectable: Manual
SDRAM CAS Latency: 5T
SDRAM RAS to CAS Delay (tRCD): 5T
SDRAM Row Precharge (tRP): 5T
SDRAM Active to Precharge Delay (tRAS): 12T
SDRAM Write Recovery Time: 5
Write to Precharge Delay: 15 (If it's Listed)
Command Rate: 2T
DDR2 SDRAM Voltage: 1.9
Advanced voltage control
CPU Vcore offset:_Disabled
DDR2 Termination: 0.5x
CPU to NB HT:____1.200V
NB to SB HT:_____AUTO
NB Core/PCI-E:___AUTO
SB Core/PCI-E:___AUTO
SB Standby core:_+1.500V

Output driver control
CKE:______AUTO
CS/ODT:__1.00X
ADD/CMD:_1.00X
MEMCLK:__1.00X
All other settings are motherboard defaults.
Maximum DDR2 recommended VDIMM: 2.1 Volts

This post has been edited by ldragon: Dec 18 2007, 12:34 PM

Thanks, I will try but aint easy as my rams are under the cpu heatsink (aka Xigmatek). In order to take off my ram, I need to take out my heatsink.

anyone sell Corsair Twin XMS2 ?? i wan a 2X512MB DDR2 667 or 800Mhz also can

This post has been edited by general_odin: Dec 18 2007, 02:38 PM

Can go pretty far.CL3 850ish,CL4 i think +/-1000,CL5 1200(Really luck and pretty extreme) and can go higher with better cooling

guys, few quick questions to ask:

for a pair of d9gmh (average class, not top class)

1.) how much voltage needed to do DDR800 @ 4-4-4-x?
2.) how much voltage needed to do DDR1000 @ 5-4-4-x?
3.) how high it can go & amount of juice needed?

i'm currently considering to upgrade to d9gmh from d9dcl, please give some inputs whether it's worth it or not, thanks...

my pair of d9dcl can do:
1.) DDR800 @ 4-4-4-8 w/ 2.05v
2.) DDR850 @ 4-4-4-8 w/ 2.20v
3.) DDR1000 @ 5-4-4-15 w/ 2.20v

This post has been edited by ah_khoo: Dec 19 2007, 08:49 AM

Ello i got 1 question.
My Motherbord supports 1333Mhz FSB (C2Q compatible)
But equipted with a Pentium D 3.2GHz
so i want to add a DDR2 RAM in it, what is the MAX MHz can i fit in??
667, 800 or 1066???
i'm looking for a High Performance one...

This post has been edited by general_odin: Dec 19 2007, 05:05 PM

Definitely the D9GMH will OC higher but in terms of real-world app, it won't be noticeable.

My crucial ballistix DDR2-800:
DDR800 @ 4-4-4-8 @ 1.8v - bootable into windows but never tried stability (because not planning to run so low!!!)
DDR 950mhz @ 4-4-4-4 @ 2.1v (was running 24/7 at this setting before changing to the setting below)
---- note 4-4-4-4 and NOT 4-4-4-8!!!
DDR 1051mhz @ 5-4-4-8 @ 2.1v (was running 24/7 at this setting)

Why not 2.2v? Hehe.... don't want to run so high.....

Now running crucial 10th anni, not as good as my ballistix, probably not a good batch... (See my sig)

---

Added on December 19, 2007, 5:16 pmWhat mobo? You can google the information or go to their website to check the specs. IINM, a lot of mainstream mobos support DDR2-800 but can OC higher than that.

---

Added on December 19, 2007, 6:26 pmNice article on tRD (aka performance level) : http://www.anandtech.com/cpuchipsets/intel...aspx?i=3184&p=8

This post has been edited by kmarc: Dec 19 2007, 06:26 PM

http://forum.lowyat.net/topic/339793/+640

i buy 10 unit kingston value ram with hynix fp-y5 ddr2 667

according to HERE

it shud hit at least la ddr 2 1000

so in my test bed (see my siggy)

i put 2 unit and set

my memory to (tforce 965pt bios)

533 divider (1:1)
fsb 333 x 9 = 3.0 (my proc can do 3 gig stock volatge)
ram voltage 2.0
timing 55515

so i put 2 set ....
then test with memtest for 5 minute

so far only 2 unit can pass the 5 minute test
another 8 unit straight error

so what went wrong here?
izzit the ram that i bought cannot be overclock at all?
i think i just use normal fsb frequency (333 is their stock speed rite?for ram rated to operate at 667)

the 2 unit that can past the test cannot load into windows at all
and another 8 that did not pass memtest can load into windows but of coz did not pas orthos

i have oni about 1 day Oc experience(borrow my fren tracer)
so easy just set this and that walah 3.2 3.4 gigz
so plz help me
(oredi posted in othe sub forum but no respon )

This post has been edited by pal33x: Dec 20 2007, 10:02 AM