even though i am using 40mhz 2nd channel below with force 40mhz ticked, all my apple devices only get maximum 65mbps tx and rx with 20mh only, but my laptop can get 300mbps

hi folks

ive flashed wahrooga farm's latest firmware 4/19.

all seems fine

but my router unable to detect my e372. the usb indicator lit up. my dongle is blinking blue but it wont auto connect, or when i click connect at the interface, nothing too. in the modem information tab, it is empty

did i setup wrongly?

please help.

the firmware looks cool, and i do not want to revert to stock firmware.

right now im connecting the dongle straight to the pc...

This post has been edited by enrell: Apr 28 2013, 11:45 AM

u need to make sure u didnt tweak any turbo supercharges or tweaking any TX/RX value number,.. u need to make sure your E372 is original factory default setting ,. then it will work,.

or

u can set up manually :

- then login 192.168.1.1 ( you will see LuCI Gui interface )
- click login
- go to System
- go to Administration
- key in your new password ( For web Gui )
- re key in your same password again
- click save and apply
- go to Network
- click Edit on Wan ( 3G wan )
- select UMTS/GPRS/ED-VO protocol
- click switch protocol
- select UMTS/GPRS/ED-VO on protocol again
- Modem device ( zte mf680 = /dev/ttyUSB1 , E372 = /dev/ttyUSB0 <- last is zero )
- service type : select UMTS only or UMTS/GPRS
- Key in your ISP APN , ( Unet, Maxisbb, bbnet, celcom3g, u3g, my3g and so on )
- Go to ADvance setting
- Modem init time out: 5 ( key in )
- Use gateway Metric : 0
- Tick the box of : if uncheck, No default route is configure
- Use custom DNS server : 8.8.8.8 click the icon at the end
- second roll: 8.8.4.4
- LCP echo failed Threshold : 0
- LCP echo interval : 5
- Inactivity timeout: 0
- select Wifi
- click Edit
- select your wifi prefer channel 1~11
- enter your wifi name in ESSID
- go to Wireless security
- encryption : WPA2-PSK
- key : wifi password
- click save and apply
- then click enable to on your wifi ( if u need it )
- now go to System
- Reboot
- click Performs reboot
- plug in your Usb modem after
- wait for reboot finish and enjoy

my mobile device also 65Mbps Max while my acer laptop is 300Mbps,..

chuah enrell is with the latest firmware, which doesnt require anything except setting up the APN right?

edited: there is also a problem with the firmware where they detect the wrong usb port... so might need to manually change to it

This post has been edited by renishi: Apr 28 2013, 12:40 PM

yeah manually decrease or increase port might help,..

but mine doesn't work too after manually increase or decrease port , i use manually setup 3G-wan

This post has been edited by chuahcs79: Apr 28 2013, 12:50 PM

Just increase the port #, you will see "porting changing" , then run a speedtest or load a page, later you can see your Modem Detected with the telco info like Cell Id BUT Maximum QoS is no more shown.

mine is not working

already try,. the only way is manually setup 3g-wan for me,..

that's why currently i say openwrt AA is better for me now since 4-19 can't auto detect my hauwei E1820

managed to get it to work. i did not factory reset after flashing.

under script version, under modem. it shows somewhere in february. after resetting, it shows black window apr.

anyways, got new error. i have followed everything that need to be modified but the settings wont stick.

after rebooting, it revert to Protocol - DHCP client. i am able to surf using that.

using the recommended settings and after save/apply, im not able to surf. after rebooting, same thing.

i have to turn the router off/on and then able to surf but using the DHCP client protocol

help please

getting too frustrated with this

are u using MR3420 V1 or V2 ?

if V1 , u can try the openwrt Altitude adjustment

Download this Openwrt image ( compile by khairilyazit & Ibnuasad )
-> openwrt-ar71xx-generic-tl-mr3420-V1-squashfs-factory.bin!

manually setup under the 3g-wan, and it will stick after reboot,..

im using v2.

any performance downside if i continue to use dhcp?

On Huntsman 2013-04-23 now

Using E372 modem, just Increase Com Port > Load a page > Bingo





AA is good and stable but HM have more features and stuff to play play



Thanks to Dairyman and Wahroonga Farm

bro
again the 4-23 huntsman only for 3 model,. V1 , V2 mr3420 and WR703

mine is mr3040V1

all of u in new interface ar? how to update to that again?

guys

somethinf happened.

all of the sudden the router leds started to blink non-stop.

i tried to turn it off/reset button etc, still the same

could not access the webgui.

is the router 'bricked'?

sian. just bought it yesterday. cockup

credit is to khairilyazit

what did the last thing u did before the router blink led ?

What have you done to make it into this condition ?

i was trying to flash stock firmware via putty following the instructions on openwrt wiki.

flash failed though something about something cannot be erased.

then i surf as per normal, when suddenly router cut off, with the leds blinking.

This post has been edited by enrell: Apr 28 2013, 08:31 PM

if u refer to the dairyman canada guide in that websites,

do a reset,.. there is a 30/30/30 reset

use something which u can poke the reset hole, hold it with power on for 30 second,

continue to hold it for another 30 second with power off

then continue still holding it for another 30 second with power on,..

then let it go and reboot the router,.. see whether it work

This post has been edited by chuahcs79: Apr 28 2013, 08:48 PM