Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 Tp LInk TL-MR3420 Owner CLub V2.5, need a pro here

views
     
enrell
post Apr 28 2013, 11:42 AM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
hi folks

ive flashed wahrooga farm's latest firmware 4/19.

all seems fine

but my router unable to detect my e372. the usb indicator lit up. my dongle is blinking blue but it wont auto connect, or when i click connect at the interface, nothing too. in the modem information tab, it is empty

did i setup wrongly?

please help.

the firmware looks cool, and i do not want to revert to stock firmware.

right now im connecting the dongle straight to the pc...

This post has been edited by enrell: Apr 28 2013, 11:45 AM
enrell
post Apr 28 2013, 01:23 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
managed to get it to work. i did not factory reset after flashing.

under script version, under modem. it shows somewhere in february. after resetting, it shows black window apr.

anyways, got new error. i have followed everything that need to be modified but the settings wont stick.

after rebooting, it revert to Protocol - DHCP client. i am able to surf using that.

using the recommended settings and after save/apply, im not able to surf. after rebooting, same thing.

i have to turn the router off/on and then able to surf but using the DHCP client protocol

help please

getting too frustrated with this smile.gif
enrell
post Apr 28 2013, 01:40 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
im using v2.

any performance downside if i continue to use dhcp?
enrell
post Apr 28 2013, 08:25 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
guys

somethinf happened.

all of the sudden the router leds started to blink non-stop.

i tried to turn it off/reset button etc, still the same

could not access the webgui.

is the router 'bricked'?

sian. just bought it yesterday. cockup
enrell
post Apr 28 2013, 08:31 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
QUOTE(chuahcs79 @ Apr 28 2013, 08:30 PM)
what did the last thing u did before the router blink led ?  hmm.gif
*
i was trying to flash stock firmware via putty following the instructions on openwrt wiki.

flash failed though something about something cannot be erased.

then i surf as per normal, when suddenly router cut off, with the leds blinking.

This post has been edited by enrell: Apr 28 2013, 08:31 PM
enrell
post Apr 28 2013, 08:56 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
QUOTE(chuahcs79 @ Apr 28 2013, 08:46 PM)
if u refer to the dairyman canada guide in that websites,

do a reset,..  there is a 30/30/30 reset  notworthy.gif

use something which u can poke the reset hole, hold it with power on for 30 second,

continue to hold it for another 30 second with power off

then continue still holding it for another 30 second with power on,..

then let it go and reboot the router,.. see whether it work  hmm.gif
*
mine no reset hole.

got reset button.

tried the 30/30/30

no diff...
enrell
post Apr 28 2013, 09:07 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
QUOTE(chuahcs79 @ Apr 28 2013, 09:03 PM)
model ?

V2 have a small reset hole though...  notworthy.gif
*
3420 v2.1
enrell
post Apr 28 2013, 09:45 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
QUOTE(chuahcs79 @ Apr 28 2013, 09:20 PM)
there is a small reset hole at the back though,  hmm.gif
*
the reset is a button..

Click here please
enrell
post Apr 28 2013, 11:23 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
QUOTE(chuahcs79 @ Apr 28 2013, 10:20 PM)
i refer to the small hole beside the right hand side external antenna, not the reset button at left hand side though  sweat.gif

refer to the red highlight, not the black highlight

[attachmentid=3415351]
*
black highlight is the power button

red highlight is the reset button smile.gif
enrell
post Apr 28 2013, 11:25 PM

New Member
*
Junior Member
22 posts

Joined: Jan 2011
QUOTE(iOnicStorm @ Apr 28 2013, 10:53 PM)
I believe you've bricked it. See this post:
If this is the case, then you may need a serial console cable to debrick it (if the uboot partition is still working).

Else, you may need to send back to manufacturer (for warranty), asking them to flash for u. Or asking around if anybody have a flash programmer to flash the chip with a working firmware.
*
wah piang..sian lei like dat..lol...

haiz....

if send back agent, must pay or not since basically its user's fault smile.gif

This post has been edited by enrell: Apr 28 2013, 11:30 PM
« Next Oldest · Networks and Broadband · Next Newest »
 

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0525sec    1.02    7 queries    GZIP Disabled
Time is now: 12th December 2025 - 03:15 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.