Outline ·
[ Standard ] ·
Linear+
Tp LInk TL-MR3420 Owner CLub V2.5, need a pro here
|
renishi
|
 Apr 1 2013, 06:46 PM
|
|
Whenever i plug my usb modem (UMG1831) into my tl-mr3040 the lights keep blinking and i cant access the configuration page..... i tested them individually and it work fine. I called the tp-link hotline twice where the 1st CS suggested a modem incompatibility and 2nd just duno what is it. Both have some heavy accent which makes it hard to understand their english >< The 1st cs did gave me a software to create a bin file but i cant get it done due to some factors. Before calling them i have check the latest firmware and compatible list which mine is not there. Hopefully i am asking in the right section, is this a hardware problem with the router or just modem incompatibility? edited: problem solved when i read about someone else problem in the tp-link forum, where his router only works with battery. I figure it has to be something similar so i put in my battery and it works! next i put in the ac power and it works.... finally it was own stupidity that causes all this as apparently it need at least a min of 1.0A to work and i was being stubborn to power it up with a usb port..... there goes 1hr+ of my life  This post has been edited by renishi: Apr 1 2013, 07:06 PM |
|
|
|
|
|
renishi
|
Apr 5 2013, 06:42 PM
|
|
|
» Click to show Spoiler - click again to hide... « ####################################################################
# TL-MR3040 System Log
# Time = 1970-01-01 0:01:32 93s
# H-Ver = MR3040 v2 00000000 : S-Ver = 3.14.4 Build 121017 Rel.62268n
# L = 192.168.0.1 : M = 255.255.255.0
# 3G : 3G = 0.0.0.0 : M = 0.0.0.0 : G = 0.0.0.0
####################################################################
1st day 00:00:07 OTHER INFO System started
1st day 00:00:19 DHCP NOTICE DHCP server started
1st day 00:00:19 SECURITY INFO PPTP Passthrough enabled
1st day 00:00:19 SECURITY INFO L2TP Passthrough enabled
1st day 00:00:19 SECURITY INFO IPSEC Passthrough enabled
1st day 00:00:19 DHCP NOTICE DHCPS:Recv REQUEST from 1C:6F:65:D3:6E:DC
1st day 00:00:19 SECURITY INFO FTP ALG enabled
1st day 00:00:19 SECURITY INFO TFTP ALG enabled
1st day 00:00:19 SECURITY INFO H323 ALG enabled
1st day 00:00:19 SECURITY INFO RTSP ALG enabled
1st day 00:00:21 DHCP NOTICE DHCPS:Send ACK to 192.168.0.100
1st day 00:00:25 DHCP NOTICE DHCPS:Recv INFORM from 1C:6F:65:D3:6E:DC
1st day 00:00:32 3G/4G NOTICE handle_card start
1st day 00:00:32 3G/4G INFO LTE MODEM = 0, status = 1, targetVendorID = 0x0, targetProductID = 0x0
1st day 00:00:37 3G/4G INFO Before Mode switch VendorID = 0x12d1, ProductID = 0x1505
1st day 00:00:37 3G/4G INFO This is a LTE modem which needs mode switch.
1st day 00:00:51 3G/4G NOTICE after switch modem vid is 0x12d1 pid is 0x1506
1st day 00:00:51 3G/4G INFO LTE MODEM = 1, status = 2, targetVendorID = 0x12d1, targetProductID = 0x1506
1st day 00:00:58 3G/4G INFO USB modem is ready
1st day 00:01:00 3G/4G NOTICE 3G/4G start connecting...
1st day 00:01:03 DHCP INFO dhcpc_ipc_data_rcv_router 675 : current network type = 1
1st day 00:01:03 DHCP NOTICE DHCPC Send DISCOVER with request ip 0 and unicast flag 0
1st day 00:01:05 DHCP NOTICE DHCPC Send DISCOVER with request ip 0 and unicast flag 0
1st day 00:01:07 DHCP NOTICE DHCPC Send DISCOVER with request ip 0 and unicast flag 0
1st day 00:01:11 DHCP NOTICE DHCPC Send DISCOVER with request ip 0 and unicast flag 1
1st day 00:01:13 DHCP NOTICE DHCPC Send DISCOVER with request ip 0 and unicast flag 1
1st day 00:01:15 DHCP NOTICE DHCPC DHCP Service unavailable, recv no OFFER
1st day 00:01:15 DHCP INFO dhcpc_ipc_data_rcv_router 675 : current network type = 1
1st day 00:01:25 3G/4G NOTICE 3G/4G start connecting...
1st day 00:01:29 DHCP INFO dhcpc_ipc_data_rcv_router 675 : current network type = 1
1st day 00:01:29 DHCP NOTICE DHCPC Send DISCOVER with request ip 0 and unicast flag 0
1st day 00:01:31 DHCP NOTICE DHCPC Send DISCOVER with request ip 0 and unicast flag 0
hi tried to setup this humble router but it just doesnt connect.... tried unet to maxisbb but all them just dont work.... anyone can interpret this system log and tell me what is going on here? |
|
|
|
|
|
renishi
|
Apr 5 2013, 07:09 PM
|
|
|
but it is the latest firmware... the latest preinstalled...
what security? or should i ask which 1 to be disable?
|
|
|
|
|
|
renishi
|
Apr 5 2013, 07:20 PM
|
|
|
actually this is on tl-mr3040... haha sry~ written on the system log
was hoping for more assistance and a thread for 3020/3040 just doesnt exist
|
|
|
|
|
|
renishi
|
Apr 19 2013, 01:20 AM
|
|
|
same la.... dairyman told me have to put just our own apn and the others on default then ok jor... but still cant
chuah, can teach me how to flash back to stock firmware if he doesnt recognize the default tp-link file?
This post has been edited by renishi: Apr 19 2013, 01:21 AM
|
|
|
|
|
|
renishi
|
Apr 19 2013, 05:03 AM
|
|
|
dont flash the latest huntsman fw yet! 4-19 version has some problem....
|
|
|
|
|
|
renishi
|
Apr 21 2013, 05:23 AM
|
|
|
may i ask what does this AA and trunk stands for? what does it offeR?
|
|
|
|
|
|
renishi
|
Apr 23 2013, 11:31 PM
|
|
|
QUOTE(akping_1 @ Apr 23 2013, 09:22 PM) dont have another pc now..will try when borrow it from friend tried the with putty or winscp di? |
|
|
|
|
|
renishi
|
Apr 24 2013, 12:17 AM
|
|
|
have u set up the password?
If yes, then use WinSCP to flash in new fw. It should solve the problem.
|
|
|
|
|
|
renishi
|
Apr 24 2013, 12:39 AM
|
|
|
I presume u have your password set up then.
and i dont comprehend "i guess before that the hard reset should work"
lol ps ar...
and u can follow this thread to set up ur winscp
|
|
|
|
|
|
renishi
|
Apr 24 2013, 12:51 AM
|
|
|
Yes, and u still can access 192.168.1.1? if not try the method below http://ediy.com.my/index.php/blog/item/51-...iginal-firmware |
|
|
|
|
|
renishi
|
Apr 24 2013, 12:53 AM
|
|
|
» Click to show Spoiler - click again to hide... « Using TFTP
When the router software boots up it will, in many cases, look for an image to flash. If this image is presented to it at the correct time it will upload it and then flash the router. The upload method used is TFTP and requires a program on your computer to send the file to the router. A good program is tftp2 and that is what we will use here.
Unplug the router from power as we need to be ready to send the file while the router is booting up. Run tftp.exe and fill in the required information.
Enter the router's IP Address as the Server and the router password as Password. Browse to the image you wish to flash the router with in File. Set the retry value to 20. Click on Upgrade.
Now plug the router back in to power and let it boot up. The tftp program will attempt to send the file to the router at the correct moment during boot up.
Wait for at least 5 minutes before doing anything, unless you receive an error message from tftp. If all went well the router will flash the image and reboot.
If this fails, try booting the router up in Failsafe mode as described above. Use a server address of 192.168.1.1 for this, regardless of the actual IP Address of the router. http://www.rfactory.org/OpenWRT/unbrick.htmlcan use the tftp method to flash also which is much easier This post has been edited by renishi: Apr 24 2013, 12:54 AM |
|
|
|
|
|
renishi
|
Apr 24 2013, 12:31 PM
|
|
|
finally my tl-mr3040 v1 recognize my E392.... with MR3040V1 AA.bin jaja.... i bricked the unit until no led lights left except the power led and THANK YOU GOOGLE!! for providing the solutions *sigh* such a huge relief manage to do it without the serial code... lesson learnt... dont do anything drastic to something that i am not familiar with |
|
|
|
|
|
renishi
|
Apr 25 2013, 03:25 AM
|
|
|
@chuah: whenever i enable wifi with the 3040v1 AA fw, it keep restart ><
not sure if i set my wifi wrongly but i tried from auto to others still cant lol
|
|
|
|
|
|
renishi
|
Apr 25 2013, 09:11 PM
|
|
|
QUOTE(chuahcs79 @ Apr 25 2013, 03:43 AM) enable or disable the wifi dont need to restart though...  did u double check your setting ? For the wifi setting i adjusted the following ESSID > channel on auto > Wireless security > country code the mode is on 802.11 g + n ht mode in 20mhz network at lan mode at access point |
|
|
|
|
|
renishi
|
Apr 27 2013, 11:11 PM
|
|
|
chuah wifi and firewall setting!! |
|
|
|
|
|
renishi
|
Apr 28 2013, 01:58 AM
|
|
|
mine everything the same except country code is my... later i try US see got diff or not
|
|
|
|
|
|
renishi
|
Apr 28 2013, 12:39 PM
|
|
|
chuah enrell is with the latest firmware, which doesnt require anything except setting up the APN right?
edited: there is also a problem with the firmware where they detect the wrong usb port... so might need to manually change to it
This post has been edited by renishi: Apr 28 2013, 12:40 PM
|
|
|
|
|
|
renishi
|
Apr 28 2013, 05:37 PM
|
|
|
all of u in new interface ar? how to update to that again?
|
|
|
|
|
|
renishi
|
Apr 29 2013, 09:09 PM
|
|
|
My MR3040V1 can detect everything nicely but i did set up the apn and it stills goes into reboot loop when i enable my wif... i suspect is hardware di... cannot be so many problem 1.... I am thinking of buying another 3g modem just to test this out and since i ordered the MB prepaid plan ~ i might need a secondary modem too |
|
|
|
|
Quote
0.0508sec
0.61
7 queries
GZIP Disabled