Hi guys,

Whilst I'm not 100% on this, it does appear that router/ modem instability may well be a consequence of the 'modem turbo mod', particularly lifting the modem Tx power.

So if your router modem combo is suffering stability problems, consider putting the modem back to standard factory setting.

Cheers

well my huawei E1820 is untweaked and original factory setting ,. but no luck still, guess i better flash back to openwrt AA,..

bro i think u miss the info,

the latest huntsman 4-23 only for mr3420V1 , V2 ans WR703N 3 model only,.

as for mr3040V1 latest huntsman is 4-19

opps ...My bad...really sorry abt it..

Just flashed Huntsman 04-19 on my 3420 v2, but the wifi seems perform slower than stock tp-link fw.

Any tweaks or info to enhance it? Or just my setting is mistake?
FYI I already set max transmit power, 40mhz below, channel 11.

Any pro mind to help out?

Thanks in advance and regards

@chuah: whenever i enable wifi with the 3040v1 AA fw, it keep restart ><


not sure if i set my wifi wrongly but i tried from auto to others still cant lol

u should try the latest huntsman 4-23 instead of 4-19 for mr3420 V2


This post has been edited by chuahcs79: Apr 25 2013, 03:42 AM

enable or disable the wifi dont need to restart though...

did u double check your setting ?

An E1820 for DM to have a look at.

DM says

"This is another of the oddball Huawei modems floating around.

It has a cdc-ether interface but is really a PPP modem. The E173 is the same.

Since I added cdc-ether support for the host-less modems these other ones get picked up as cdc-ether modems as well when they should be picked up as PPP.

Not hard to fix since a host-less modem doesn't have a serial driver attached to it and these do.

One more for the ToDo list."

DM may be able to connect with CDC-ether; if not it will be PPP which will be fine for this modem. He'll no doubt report back.

Cheers

John k

This post has been edited by Wahroonga Farm: Apr 25 2013, 05:32 AM

thanks bro, the new interface is so modern.
now my wifi perform normal d.

thanks and regards.

thanks and finger cross to hear from you & DM soon again

thanks for hard work

yea personally i love that modern interface but too bad dont have any firmware for my mr3040V1 yet,.. so need to be extra patience

Hi Guys 'n Gals,

Just a peak into the future. Here is the current ROOter ToDo list:

To Do – Fixes to cron and Keep Alive, fix for old cdc-ether modems so they run as PPP, fix so getsig won't run on a WAN reboot, update to new Luci GUI (SVN package update), driver-less modem support (testing required for existing fixes), entry of SIM Pin code (for QMI based modems), update to QOS system (traffic quotas and WAN traffic counter), mode and band selection, the odd stray modem and SMS messaging.

Many of these will be addressed in the next Huntsman release.

ROOter development is shifting gears.

With the next release, most current and old modems should be supported. There will be the odd old one that won't work, but there are other software that may support these.

The focus will shift towards:

- ROOter features
and
- support for new 4G modems that enter the market

We aim to be the first to provide USB modem support for a new modem, but we cannot do it, without your help.

BTW ROOter comes from it's Australian heritage ... Kangaroo's and routers.

But our brilliant programmer is Dairyman from Canada.

yeah, waiting the new interface for my 3020 too

finger cross and hopefully it will be soon release,.

For the wifi setting i adjusted the following

ESSID > channel on auto > Wireless security > country code

the mode is on 802.11 g + n

ht mode in 20mhz

network at lan

mode at access point

If too hot the performance will drop a bit.

guys if u want the new theme for ur router.. try searching for luci-theme-bootstrap at the software tab..
if got install then set it at the system tab, language part..

Thx for the tip! The new theme is much cleaner and elegant

@Wahroonga Farm

do you have any idea why if i use my ZTE MF680, the WAN dhcp lease time only 7200 sec ?

from system log :



while if i use my 320U, the lease time longer (200k something) ?

great firmware btw!