Yup. That's as easy as that. Have you flash? Or you better do it quick, or your router could possibly go haywire later on... See post #835, and post #839.

Flash back to original firmware first. If it's working alright then wait a few days or a week (use as normal). If it's alright then you can flash to any other firmware as you like later on.

already flash to stock firmware n now works on LAN n wifi..will try again flash to huntsman n see whether the weird thing happen again or not..

Worst case scenario, sell it for rm50 ~ lost of users will Q up to buy.

Then add rm30 to buy a new one to flash again

good idea..haha..need to run the test again before decide nak jual or not..

Guys, I'm using TL-MR3420 V2(stock firmware) with Huawei E398(firmware version:11.433.61.10.55).
Everyday my connection will disconnected for several times, and have to reboot my MR3420 V2 then only can get back the connection.
Everytime when my connection lost, I enter the TP-Link router setup page, under the status tab, 3G there shown disconnected.
Is there any way to fix this problem? Like always connected to internet, or auto reconnect back to internet after disconnected?
Thx in advance

r u connecting ur e398 directly to the router usb port or using usb cable extension before connecting to the router?

my tp-link wr1043ND, after press the reset button, system wont able to back to default setting..

anyone here can help ?


Solved:

Solution:
pls refer to below url:
http://klseet.com/index.php/tl-wr1043nd-ve...vert-to-factory

This post has been edited by gskow: Jul 17 2013, 02:15 PM

anyone here using a DLP panel antenna?

how's the dc-hspa+ connection perform so far?
how's the ping/latency for online gaming like Dota2?

really need an antenna, latency spikes very frequent these days



This post has been edited by Turnip: Jul 17 2013, 05:33 PM

Direct connect to router

anyone used the multiwan feature?

want to connect 3G and streamyx together

@greenlp_87
Yes. It's a good practice to do a factory reset to restore router to default configuration. Just for safety.

Flash to ROOter (preferably BlackWidow for stability) and use the keep-alive function. Instruction's on the ROOter homepage.

DISCLAIMER: Do it at your own risk! Flashing a new firmware always carries a risk to brick your router. So, make all possible preparation b4 / during / after flash, just to be sure.

This post has been edited by iOnicStorm: Jul 19 2013, 11:16 PM

Could be done successfully with a vanilla OpenWRT. Multiwan should be OK with 2 different ISP, whether backup/fail-over or load balancing.

Last time tried multiwan load balancing on streamyx (ADSL + WiFi) with no success...
Now playing around with macvlan + multiwan...

For reference -> http://wiki.openwrt.org/doc/uci/multiwan
Windows users can try Connectify Dispatch.

This post has been edited by iOnicStorm: Jul 17 2013, 08:23 PM

how your speed test?

weird..before this i facing the same problem but happen when im connecting using usb cable extension..after connect directly and flash back to factory fw its back to normal..

exactly, just make sure use the right firmware for ur router

BTW is there anyway anyway to lock the modem to connect to one cell id/tower only? coz my modem keeps changing on connecting to 2 different tower in which one is fast and second one so slow....

hello guys. ive been thinking about throwing my old 3420 to the trash bin and getting a new 3g/4g router?
any suggestions?
thinking about getting the v2 3420
reason: bricked.

This post has been edited by bosouman: Jul 19 2013, 09:21 AM

What steps you took that to brick-en it ?

I guess its only soft bricked and can be rescue via some shortening of the mobo

Give it to me.

huntsman rooter can multiwan? i got spare streamyx