Refer to your unifi installation document (blue paper) or you can request from unifi itself. Just say you accidentally reset your router and need the credentials to set up the router back again. Or another simple method is to gain your PPPoE username and password through the wireless router admin panel (also you can refer to this thread - credit to bro soonwai, just in case) and its pretty simple if you follow the right guide especially if you're a novice user. Sorry for the delayed response mate. 

Hi ASUSmy, the special firmware from you does not works for me as i still encounter above issue. I already tried download latest firmware for AC68U and still the same.

Obviously when running BT then the router will suddenly unstable - WIFI down (cant detect), wired connection appear no internet, then it will back to normal around 5 minutes.

FYI, I have more than 10 devices sometimes 17 connected (mostly thru WIFI 2.4 Ghz), could this be the issue? out of memory?

ASUSmy, please help

Sep 10 17:51:37 pppd[27623]: Timeout waiting for PADO packets
Sep 10 17:52:52 pppd[27623]: Timeout waiting for PADO packets
Sep 10 17:54:07 pppd[27623]: Timeout waiting for PADO packets
Sep 10 17:55:22 pppd[27623]: Timeout waiting for PADO packets
Sep 10 17:56:38 pppd[27623]: Timeout waiting for PADO packets
Sep 10 17:57:53 pppd[27623]: Timeout waiting for PADO packets
Sep 10 17:59:08 pppd[27623]: Timeout waiting for PADO packets
Sep 10 18:00:23 pppd[27623]: Timeout waiting for PADO packets
Sep 10 18:01:38 pppd[27623]: Timeout waiting for PADO packets
Sep 10 18:02:53 pppd[27623]: Timeout waiting for PADO packets
Sep 10 18:04:08 pppd[27623]: Timeout waiting for PADO packets
May  5 13:05:26 kernel: klogd started: BusyBox v1.25.1 (2020-04-08 11:15:23 CST)
May  5 13:05:26 INIT: firmware version: 3.0.0.4_382_70348-gb917269
May  5 13:05:26 kernel: Linux version 3.4.103 (root@asus) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Wed Apr 8 11:19:22 CST 2020
May  5 13:05:26 kernel: CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
May  5 13:05:26 kernel: CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
May  5 13:05:26 kernel: Machine: Qualcomm Atheros AP148 reference board
May  5 13:05:26 kernel: msm_reserve_memory: 0x44000000, 0x600000
May  5 13:05:26 kernel: msm_reserve_memory: 0x44600000, 0x200000
May  5 13:05:26 kernel: Memory policy: ECC disabled, Data cache writealloc
May  5 13:05:26 kernel: smem_find(137, 80): wrong size 72
May  5 13:05:26 kernel: Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 121642
May  5 13:05:26 kernel: Kernel command line: console=ttyHSL1,115200n8 rootfstype=squashfs root=/dev/mtdblock6 ubi.mtd=UBI_DEV
May  5 13:05:26 kernel: Memory: 476292k/488580k available, 14204k reserved, 0K highmem
May  5 13:05:26 kernel: Virtual kernel memory layout:
May  5 13:05:26 kernel:     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
May  5 13:05:26 kernel:     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
May  5 13:05:26 kernel:     vmalloc : 0xdf000000 - 0xff000000   ( 512 MB)
May  5 13:05:26 kernel:     lowmem  : 0xc0000000 - 0xdeb00000   ( 491 MB)
May  5 13:05:26 kernel:     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
May  5 13:05:26 kernel:     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
May  5 13:05:26 kernel:       .text : 0xc0008000 - 0xc0633000   (6316 kB)
May  5 13:05:26 kernel:       .init : 0xc0700000 - 0xc0803b80   (1039 kB)
May  5 13:05:26 kernel:       .data : 0xc0804000 - 0xc089abe0   ( 603 kB)
May  5 13:05:26 kernel:        .bss : 0xc089ac04 - 0xc095d63c   ( 779 kB)
May  5 13:05:26 kernel: Invalid signature of oopsbuf: 0A-02-20-31-45-01-06-00 (len 530512)
May  5 13:05:26 kernel: CPU1: Booted secondary processor
May  5 13:05:26 kernel: AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
May  5 13:05:26 kernel: smem_find(137, 80): wrong size 72
May  5 13:05:26 kernel: clk_tbl_nss_fast - loaded
May  5 13:05:26 kernel: PCI: enabling device 0000:02:00.0 (0140 -> 0143)
May  5 13:05:26 kernel: PCI: enabling device 0000:00:00.0 (0140 -> 0143)
May  5 13:05:26 kernel: SCSI subsystem initialized
May  5 13:05:26 kernel: msm_rpm_log_probe: OK
May  5 13:05:26 kernel: Asymmetric key parser 'x509' registered
May  5 13:05:26 kernel: msm_serial_hs: probe of msm_serial_hs.0 failed with error -2
May  5 13:05:26 kernel: using mdc(1) mdio(0)
May  5 13:05:26 kernel: 0x88a8,0x88a8,0x88a8,0x88a8,0x88a8,0x88a8,
May  5 13:05:26 kernel: MDC delay in 250 nano second
May  5 13:05:26 kernel: rtk_switch_init() return 0
May  5 13:05:26 kernel: initialize_switch: Skip rtk_port_macForceLinkExt_set(port 16)
May  5 13:05:26 kernel: initialize_switch: Skip rtk_port_macForceLinkExt_set(port 17)
May  5 13:05:26 kernel: power down all ports
May  5 13:05:26 kernel: rtk_led_enable_set(LED_GROUP_0...): return 0
May  5 13:05:26 kernel: rtk_led_operation_set(): return 0
May  5 13:05:26 kernel: rtk_led_groupConfig_set(LED_GROUP_0...): return 0
May  5 13:05:26 kernel: current led blinkRate: 0
May  5 13:05:26 kernel: rtk_switch_maxPktLenCfg_get(0): return 0
May  5 13:05:26 kernel: current rtk_switch_maxPktLen(0): 16368
May  5 13:05:26 kernel: rtk_switch_maxPktLenCfg_set(0): return 0
May  5 13:05:26 kernel: rtk_switch_maxPktLenCfg_get(1): return 0
May  5 13:05:26 kernel: current rtk_switch_maxPktLen(1): 16368
May  5 13:05:26 kernel: rtk_switch_maxPktLenCfg_set(1): return 0
May  5 13:05:26 kernel: rtk_switch_portMaxPktLen_set(0, GE, 0): return 0
May  5 13:05:26 kernel: rtk_switch_portMaxPktLen_set(1, GE, 0): return 0
May  5 13:05:26 kernel: rtk_switch_portMaxPktLen_set(2, GE, 0): return 0
May  5 13:05:26 kernel: rtk_switch_portMaxPktLen_set(3, GE, 0): return 0
May  5 13:05:26 kernel: rtk_switch_portMaxPktLen_set(4, GE, 0): return 0
May  5 13:05:26 kernel: rtk_switch_portMaxPktLen_set(5, GE, 0): return 0
May  5 13:05:26 kernel: rtk_switch_portMaxPktLen_set(6, GE, 0): return 0
May  5 13:05:26 kernel: rtk_switch_portMaxPktLen_set(7, GE, 0): return 0
May  5 13:05:26 kernel: rtk_switch_greenEthernet_get(): return 0
May  5 13:05:26 kernel: current rtk_switch_greenEthernet state: 1
May  5 13:05:26 kernel: rtk_switch_greenEthernet_set(): return 0
May  5 13:05:26 kernel: rtk_vlan_init(): return 0
May  5 13:05:26 kernel: rtk_filter_igrAcl_init(): return 0
May  5 13:05:26 kernel: # setting realtek trunk group(2) ports(00030000)
May  5 13:05:26 kernel: # setting realtek trunk algo(0x00000001,0)
May  5 13:05:26 kernel: rtl8370mb driver initialized
May  5 13:05:26 kernel: ahci ahci.0: forcing PORTS_IMPL to 0x1
May  5 13:05:26 kernel: ONFI probe : Found an ONFI compliant device MX30UF2G18AB        �
May  5 13:05:26 kernel: ONFI probe success
May  5 13:05:26 kernel: MTD_BOOT_PART_SIZE 3e0000 MTD_CONFIG_PART_SIZE 20000 msm_nand_partitions[0].size 3e0000 mtd->erasesize 20000
May  5 13:05:26 kernel: Creating 2 MTD partitions on "msm_nand":
May  5 13:05:26 kernel: 0x000000000000-0x0000003e0000 : "Bootloader"
May  5 13:05:26 kernel: 0x000000400000-0x000010000000 : "UBI_DEV"
May  5 13:05:26 kernel: UBI: attaching mtd1 to ubi0
May  5 13:05:26 kernel: UBI: physical eraseblock size:   131072 bytes (128 KiB)
May  5 13:05:26 kernel: UBI: logical eraseblock size:    126976 bytes
May  5 13:05:26 kernel: UBI: smallest flash I/O unit:    2048
May  5 13:05:26 kernel: UBI: VID header offset:          2048 (aligned 2048)
May  5 13:05:26 kernel: UBI: data offset:                4096
May  5 13:05:26 kernel: UBI: max. sequence number:       2042048
May  5 13:05:26 kernel: UBI: attached mtd1 to ubi0
May  5 13:05:26 kernel: UBI: MTD device name:            "UBI_DEV"
May  5 13:05:26 kernel: UBI: MTD device size:            252 MiB
May  5 13:05:26 kernel: UBI: number of good PEBs:        2015
May  5 13:05:26 kernel: UBI: number of bad PEBs:         1
May  5 13:05:26 kernel: UBI: number of corrupted PEBs:   0
May  5 13:05:26 kernel: UBI: max. allowed volumes:       128
May  5 13:05:26 kernel: UBI: wear-leveling threshold:    4096
May  5 13:05:26 kernel: UBI: number of internal volumes: 1
May  5 13:05:26 kernel: UBI: number of user volumes:     6
May  5 13:05:26 kernel: UBI: available PEBs:             9
May  5 13:05:26 kernel: UBI: total number of reserved PEBs: 2006
May  5 13:05:26 kernel: UBI: number of PEBs reserved for bad PEB handling: 20
May  5 13:05:26 kernel: UBI: max/mean erase counter: 1515/1013
May  5 13:05:26 kernel: UBI: image sequence number:  506988213
May  5 13:05:26 kernel: UBI: background thread "ubi_bgt0d" started, PID 59
May  5 13:05:26 kernel: gluebi_create: Hook read/write method of Factory.
May  5 13:05:26 kernel: gluebi_create: Hook read/write method of Factory2.
May  5 13:05:26 kernel: [Factory-0]: OK (ver: 16)
May  5 13:05:26 kernel: [Factory2-0]: OK (ver: 16)
May  5 13:05:26 kernel: Select [Factory-0]
May  5 13:05:26 kernel: Creating 1 MTD partitions on "linux":
May  5 13:05:26 kernel: 0x0000002108c0-0x00000400f000 : "rootfs"
May  5 13:05:26 kernel: Creating 1 MTD partitions on "linux2":
May  5 13:05:26 kernel: 0x0000002108c0-0x00000400f000 : "rootfs2"
May  5 13:05:26 kernel: Bridge firewalling registered
May  5 13:05:26 kernel: Registering SWP/SWPB emulation handler
May  5 13:05:26 kernel: ipq_nss_get_mac_addr: MAC[0]: 34:97:f6:02:35:39
May  5 13:05:26 kernel: ipq_nss_get_mac_addr: MAC[1]: 34:97:f6:02:35:3d
May  5 13:05:26 kernel: ipq_nss_get_mac_addr: MAC[2]: 34:97:f6:02:35:3e
May  5 13:05:26 kernel: ipq_nss_get_mac_addr: MAC[3]: 34:97:f6:02:35:3a
May  5 13:05:26 kernel: no pmic restart interrupt specified
May  5 13:05:26 kernel: offset 0x1000 elapse 40ms
May  5 13:05:26 kernel: bled: GPIO#9: switch ports mask        0.
May  5 13:05:26 kernel: bled: GPIO#6: switch ports mask        0.
May  5 13:05:26 kernel: bled: GPIO#68: netdev ath0.
May  5 13:05:26 kernel: bled: GPIO#67: netdev ath1.
May  5 13:05:26 kernel: bled: GPIO#7: USB BUS mask        3.
May  5 13:05:26 kernel: bled: GPIO#15: USB BUS mask        c.
May  5 13:05:26 kernel: bled: GPIO#25: interrupt 0.
May  5 13:05:26 kernel: nss_driver - fw of size 422976  bytes copied to load addr: 40000000, nss_id : 0
May  5 13:05:26 kernel: nss_driver - Turbo Support 1
May  5 13:05:26 kernel: Supported Frequencies - 110Mhz 600Mhz 800Mhz
May  5 13:05:26 kernel: nss_driver - fw of size 187968  bytes copied to load addr: 40800000, nss_id : 1
May  5 13:05:26 kernel: Error - Duplicate Interface CB Registered for interface 107
May  5 13:05:26 kernel: Error - Duplicate Interface CB Registered for interface 110
May  5 13:05:26 kernel: <NSS-CRYPTO>:Register with NSS driver-
May  5 13:05:26 kernel: power down all ports
May  5 13:05:26 kernel: ## g_wan_mask(00000010) g_lan_mask(000000ef) g_wan_mac_mask(00020000) g_lan_mac_mask(00010000)
May  5 13:05:26 kernel: LAN: P0,P1,P2,P3 WAN: P4
May  5 13:05:26 kernel: # setting realtek trunk group(2) ports(00000000)
May  5 13:05:26 kernel: # setting realtek trunk algo(0x00000001,0)
May  5 13:05:26 kernel: createVlan - vid = 500 prio = 0 mbrmsk = 0x210 untagmsk = 0x200
May  5 13:05:26 kernel: createVlan2- vid = 500 prio = 0 mbrmsk = 0x20010 untagmsk = 0x20000
May  5 13:05:26 kernel: set unknown unicast strom control rate as: 20
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 0: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 4: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 8: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 12: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 16: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 20: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 24: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 28: bucket size 49151
May  5 13:05:26 kernel: set unknown multicast strom control rate as: 20
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 1: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 5: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 9: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 13: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 17: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 21: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 25: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 29: bucket size 49151
May  5 13:05:26 kernel: set multicast strom control rate as: 20
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 2: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 6: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 10: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 14: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 18: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 22: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 26: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 30: bucket size 49151
May  5 13:05:26 kernel: set broadcast strom control rate as: 20
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 3: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 7: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 11: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 15: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 19: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 23: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 27: bucket size 49151
May  5 13:05:26 kernel: set_utp_port_storm_control: meter 31: bucket size 49151
May  5 13:05:26 kernel: # setting realtek trunk algo(0x00000001,0)
May  5 13:05:26 kernel: Enabling NSS RPS
May  5 13:05:26 kernel: <NSS-CRYPTO>:NSS Firmware initialized
May  5 13:05:26 kernel: <NSS-CRYPTO>:probing engine - 0
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[0]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[1]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[2]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[3]
May  5 13:05:26 kernel: <NSS-CRYPTO>:probing engine - 1
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[0]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[1]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[2]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[3]
May  5 13:05:26 kernel: <NSS-CRYPTO>:probing engine - 2
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[0]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[1]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[2]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[3]
May  5 13:05:26 kernel: <NSS-CRYPTO>:probing engine - 3
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[0]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[1]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[2]
May  5 13:05:26 kernel: <NSS-CRYPTO>:init completed for Pipe Pair[3]
May  5 13:05:26 kernel: asf: module license 'Proprietary' taints kernel.
May  5 13:05:26 kernel: Disabling lock debugging due to kernel taint
May  5 13:05:26 kernel: ath_tx99: Version 2.0
May  5 13:05:26 kernel: Copyright © 2010 Atheros Communications, Inc, All Rights Reserved
May  5 13:05:26 kernel: PCI: enabling device 0000:01:00.0 (0140 -> 0142)
May  5 13:05:26 kernel: __ol_ath_attach() Allocated scn da4004c0
May  5 13:05:26 kernel: nss register id -1 offload mode enabled = 0 nss config 0 Target Type a
May  5 13:05:26 kernel: Chip id: 0xa, chip version: 0x1000000
May  5 13:05:26 kernel:  Target Version is 1000000
May  5 13:05:26 kernel:  Flash Download Address  c0000
May  5 13:05:26 kernel: ol_transfer_bin_file: flash data file defined
May  5 13:05:26 kernel: Cal location [0]: 00000000
May  5 13:05:26 kernel:  Wifi0 NAND FLASH Select OFFSET 0x1000
May  5 13:05:26 kernel: qc98xx_verify_checksum: flash checksum passed: 0xc0a0
May  5 13:05:26 kernel: ol_transfer_bin_file 4025: Download Flash data len 12064
May  5 13:05:26 kernel:  Board data initialized
May  5 13:05:26 kernel: ol_ath_download_firmware: Board Id 0
May  5 13:05:26 kernel: ol_ath_download_firmware :First OTP download and Execute is good address:0x800 return param 4660
May  5 13:05:26 kernel: ol_ath_download_firmware:##Board Id 2 , CHIP Id 0
May  5 13:05:26 kernel: ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9984/hw.1/boardData_QCA9984_CUS260_2G_v1_002.bin
May  5 13:05:26 kernel:  [Flash] : Ignore Module param
May  5 13:05:26 kernel: ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
May  5 13:05:26 kernel: ol_transfer_bin_file: Downloading firmware file: QCA9984/hw.1/athwlan.bin
May  5 13:05:26 kernel: Startup Mode-0 set
May  5 13:05:26 kernel: pdev attach   (null) -1
May  5 13:05:26 kernel: HTC Service:0x0300 ep:1 TX flow control disabled
May  5 13:05:26 kernel: htt_peer_map_timer_init Enter pdev da350000 hrtimer da354860
May  5 13:05:26 kernel:  htt_alloc_peer_map_mem : Alloc Success : host q vaddr dc7dc000 paddr 5dcdc000
May  5 13:05:26 kernel:  htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
May  5 13:05:26 kernel: HTC Service:0x0100 ep:2 TX flow control disabled
May  5 13:05:26 kernel: Firmware_Build_Number:106
May  5 13:05:26 kernel: num_rf_chain:0x00000004  ht_cap_info:0x0000085b  vht_cap_info:0x339b79f2  vht_supp_mcs:0x0000ffea
May  5 13:05:26 kernel:  RES CFG Support wmi_service_bitmap 9778
May  5 13:05:26 kernel:  Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 10 to TGT
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 177 unit_len 1456,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 1 idx 4 num_units 177 unit_len 1456,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 1 idx 5 num_units 177 unit_len 1456,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 6 idx 6 num_units 35 unit_len 3072,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 7 idx 7 num_units 1 unit_len 12288,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 5 idx 8 num_units 132 unit_len 1876,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 5 idx 9 num_units 133 unit_len 1876,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 5 idx 10 num_units 133 unit_len 1876,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 5 idx 11 num_units 133 unit_len 1876,
May  5 13:05:26 kernel: ol_ath_service_ready_event[3846] WAPI MBSSID 2
May  5 13:05:26 kernel: wmi_ready_event_rx:  WMI UNIFIED READY event
May  5 13:05:26 kernel: spectral_init_netlink 78 NULL SKB
May  5 13:05:26 kernel: ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna.
May  5 13:05:26 kernel: ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
May  5 13:05:26 kernel: dfs_attach: event log enabled by default
May  5 13:05:26 kernel: ol_ath_attach: Set global_ic[1] ..ptr:bf375274
May  5 13:05:26 kernel:  Wrap Attached: Wrap_com =da48e200 ic->ic_wrap_com=da48e200 &wrap_com->wc_devt=da48e200
May  5 13:05:26 kernel: ol_ath_thermal_mitigation_attach: --
May  5 13:05:26 kernel: PCI: enabling device 0000:03:00.0 (0140 -> 0142)
May  5 13:05:26 kernel: __ol_ath_attach() Allocated scn d95004c0
May  5 13:05:26 kernel: nss register id -1 offload mode enabled = 0 nss config 0 Target Type a
May  5 13:05:26 kernel: Chip id: 0xa, chip version: 0x1000000
May  5 13:05:26 kernel:  Target Version is 1000000
May  5 13:05:26 kernel:  Flash Download Address  c0000
May  5 13:05:26 kernel: ol_transfer_bin_file: flash data file defined
May  5 13:05:26 kernel: Cal location [1]: 00004000
May  5 13:05:26 kernel:  wifi1 NAND FLASH Select OFFSET 0x5000
May  5 13:05:26 kernel: qc98xx_verify_checksum: flash checksum passed: 0x2cfa
May  5 13:05:26 kernel: ol_transfer_bin_file 4025: Download Flash data len 12064
May  5 13:05:26 kernel:  Board data initialized
May  5 13:05:26 kernel: ol_ath_download_firmware: Board Id 0
May  5 13:05:26 kernel: [wifi0] FWLOG: [23143] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
May  5 13:05:26 kernel: [wifi0] FWLOG: [23143] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
May  5 13:05:26 kernel: [wifi0] FWLOG: [23143] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
May  5 13:05:26 kernel: [wifi0] FWLOG: [23143] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
May  5 13:05:26 kernel: ol_ath_download_firmware :First OTP download and Execute is good address:0x400 return param 4660
May  5 13:05:26 kernel: ol_ath_download_firmware:##Board Id 1 , CHIP Id 0
May  5 13:05:26 kernel: ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9984/hw.1/boardData_QCA9984_CUS239_5G_v1_001.bin
May  5 13:05:26 kernel:  [Flash] : Ignore Module param
May  5 13:05:26 kernel: ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
May  5 13:05:26 kernel: ol_transfer_bin_file: Downloading firmware file: QCA9984/hw.1/athwlan.bin
May  5 13:05:26 kernel: Startup Mode-0 set
May  5 13:05:26 kernel: pdev attach   (null) -1
May  5 13:05:26 kernel: HTC Service:0x0300 ep:1 TX flow control disabled
May  5 13:05:26 kernel: htt_peer_map_timer_init Enter pdev d93e8000 hrtimer d93ec860
May  5 13:05:26 kernel:  htt_alloc_peer_map_mem : Alloc Success : host q vaddr d9992000 paddr 5ae92000
May  5 13:05:26 kernel:  htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
May  5 13:05:26 kernel: HTC Service:0x0100 ep:2 TX flow control disabled
May  5 13:05:26 kernel: Firmware_Build_Number:106
May  5 13:05:26 kernel: num_rf_chain:0x00000004  ht_cap_info:0x0000085b  vht_cap_info:0x339b79f2  vht_supp_mcs:0x0000ffea
May  5 13:05:26 kernel:  RES CFG Support wmi_service_bitmap 9778
May  5 13:05:26 kernel:  Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 10 to TGT
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 177 unit_len 1456,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 1 idx 4 num_units 177 unit_len 1456,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 1 idx 5 num_units 177 unit_len 1456,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 6 idx 6 num_units 35 unit_len 3072,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 7 idx 7 num_units 1 unit_len 12288,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 5 idx 8 num_units 132 unit_len 1876,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 5 idx 9 num_units 133 unit_len 1876,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 5 idx 10 num_units 133 unit_len 1876,
May  5 13:05:26 kernel: ol_ath_alloc_host_mem_chunk req_id 5 idx 11 num_units 133 unit_len 1876,
May  5 13:05:26 kernel: ol_ath_service_ready_event[3846] WAPI MBSSID 2
May  5 13:05:26 kernel: wmi_ready_event_rx:  WMI UNIFIED READY event
May  5 13:05:26 kernel: Add VHT160/VHT80_80 pri80 and sec80 centers: 5210,5775
May  5 13:05:26 kernel: Add VHT160/VHT80_80 pri80 and sec80 centers: 5775,5210
May  5 13:05:26 kernel: acfg_attach: Offload using existing sock dad93000
May  5 13:05:26 kernel: spectral_init_netlink 78 NULL SKB
May  5 13:05:26 kernel: ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna.
May  5 13:05:26 kernel: ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
May  5 13:05:26 kernel: ieee80211com_init_netlink: Socket already created dcc92e00
May  5 13:05:26 kernel: dfs_attach: event log enabled by default
May  5 13:05:26 kernel: ol_ath_attach: Set global_ic[2] ..ptr:bf375274
May  5 13:05:26 kernel:  Wrap Attached: Wrap_com =da48ea00 ic->ic_wrap_com=da48ea00 &wrap_com->wc_devt=da48ea00
May  5 13:05:26 kernel: ol_ath_thermal_mitigation_attach: --
May  5 13:05:26 kernel: [wifi1] FWLOG: [29880] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
May  5 13:05:26 kernel: [wifi1] FWLOG: [29880] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
May  5 13:05:26 kernel: [wifi1] FWLOG: [29880] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
May  5 13:05:26 kernel: [wifi1] FWLOG: [29880] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
May  5 13:05:26 kernel: isCountryCodeValid: EEPROM regdomain 0x0
May  5 13:05:26 kernel: isCountryCodeValid: EEPROM regdomain 0x0
May  5 13:05:26 kernel: Add VHT160/VHT80_80 pri80 and sec80 centers: 5210,5775
May  5 13:05:26 kernel: Add VHT160/VHT80_80 pri80 and sec80 centers: 5775,5210
May  5 13:05:26 kernel: wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 34:97:f6:02:35:38:
May  5 13:05:26 kernel: In ieee80211_vap_setup, line:374, wifi-pos enabled vap:0
May  5 13:05:26 kernel: __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
May  5 13:05:26 kernel: Enabling TX checksum bit for the vap ath0 features 4000
May  5 13:05:26 kernel: Enabling SG bit for the vap ath0 features 4000
May  5 13:05:26 kernel: Enabling SG bit for the vap ath0 features 4000
May  5 13:05:26 kernel: Enabling TSO bit for the vap ath0 features 4000
May  5 13:05:26 kernel: Enabling LRO bit for the vap ath0 features 4000
May  5 13:05:26 kernel: VAP device ath0 created osifp: (db4994c0) os_if: (da770000)
May  5 13:05:26 kernel: wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 34:97:f6:02:35:3c:
May  5 13:05:26 kernel: In ieee80211_vap_setup, line:374, wifi-pos enabled vap:0
May  5 13:05:26 kernel: __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
May  5 13:05:26 kernel: Enabling TX checksum bit for the vap ath1 features 4000
May  5 13:05:26 kernel: Enabling SG bit for the vap ath1 features 4000
May  5 13:05:26 kernel: Enabling SG bit for the vap ath1 features 4000
May  5 13:05:26 kernel: Enabling TSO bit for the vap ath1 features 4000
May  5 13:05:26 kernel: Enabling LRO bit for the vap ath1 features 4000
May  5 13:05:26 kernel: VAP device ath1 created osifp: (db49bcc0) os_if: (da720000)
May  5 13:05:26 kernel: UBIFS: recovery needed
May  5 13:05:26 kernel: UBIFS: recovery completed
May  5 13:05:26 kernel: UBIFS: mounted UBI device 0, volume 5, name "jffs2"
May  5 13:05:26 kernel: UBIFS: file system size:   115294208 bytes (112592 KiB, 109 MiB, 908 LEBs)
May  5 13:05:26 kernel: UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
May  5 13:05:26 kernel: UBIFS: media format:       w4/r0 (latest is w4/r0)
May  5 13:05:26 kernel: UBIFS: default compressor: lzo
May  5 13:05:26 kernel: UBIFS: reserved for root:  0 bytes (0 KiB)
May  5 13:05:26 kernel: ipq-dwc3 ipq-dwc3.0: unable to read platform data num of dbm eps
May  5 13:05:26 kernel: ipq-dwc3 ipq-dwc3.1: unable to read platform data num of dbm eps
May  5 13:05:26 kernel: msm_hsusb_host msm_hsusb_host: unable to find transceiver
May  5 13:05:28 kernel: set TXBF_SND_PERIOD: value 100 wmi_status 0
May  5 13:05:28 kernel: siwfreq
May  5 13:05:28 kernel: Set freq vap 0 stop send + da770000
May  5 13:05:28 kernel: Set freq vap 0 stop send -da770000
May  5 13:05:28 kernel: Set wait done --da770000
May  5 13:05:28 kernel: set TXBF_SND_PERIOD: value 100 wmi_status 0
May  5 13:05:28 kernel: WARNING: setting the threshold value > 256                                 will impact multiclient performance
May  5 13:05:28 kernel: siwfreq
May  5 13:05:28 kernel: Set freq vap 0 stop send + da720000
May  5 13:05:28 kernel: Set freq vap 0 stop send -da720000
May  5 13:05:28 kernel: Set wait done --da720000
May  5 13:05:29 BRT-AC828: start https:8443
May  5 13:05:29 BRT-AC828: start httpd:80
May  5 13:05:29 avahi-daemon[553]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May  5 13:05:29 syslog: Generating SSL certificate...
May  5 13:05:29 syslog: Generating SSL certificate...
May  5 13:05:29 NAT Tunnel: AAE Service is stopped
May  5 13:05:30 AAE: AAE Service is started
May  5 13:05:30 hour monitor: daemon is starting
May  5 13:05:30 disk monitor: be idle
May  5 13:05:30 UAM server: daemon is started
May  5 13:05:30 avahi-daemon[553]: Alias name "BRT-AC828" successfully established.
May  5 13:05:30 avahi-daemon[553]: Alias name "findasus" successfully established.
May  5 13:05:31 syslog: module ax88179_178a not found in modules.dep
May  5 13:05:31 syslog: module cdc_mbim not found in modules.dep
May  5 13:05:31 pppd[640]: pppd 2.4.7 started by Administrator, uid 0
May  5 13:05:32 syslog: module ledtrig-usbdev not found in modules.dep
May  5 13:05:32 syslog: module leds-usb not found in modules.dep
May  5 13:05:32 syslog: module scsi_mod not found in modules.dep
May  5 13:05:32 kernel: su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 3
May  5 13:05:33 kernel: su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 3
May  5 13:05:33 kernel: 
May  5 13:05:33 kernel:  DES SSID SET=ASUS_38_2G
May  5 13:05:33 WAN(0) Connection: Fail to connect with some issues.
May  5 13:05:33 kernel:  ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
May  5 13:05:33 kernel:  DEVICE IS DOWN ifname=ath0
May  5 13:05:33 kernel:  DEVICE IS DOWN ifname=ath0
May  5 13:05:33 kernel: OL vap_start +
May  5 13:05:33 kernel: wmi_unified_vdev_start_send for vap 0 (dab00000)
May  5 13:05:33 kernel: OL vap_start -
May  5 13:05:34 kernel: ol_vdev_start_resp_ev for vap 0 (dab00000)
May  5 13:05:34 kernel: ol_ath_wmm_update:
May  5 13:05:34 kernel: su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 3
May  5 13:05:34 kernel: wmi_unified_vdev_up_send for vap 0 (dab00000)
May  5 13:05:34 kernel: __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
May  5 13:05:34 kernel: ol_ath_vap_set_param: Now supported MGMT RATE is 1000(kbps) and rate code: 0x43
May  5 13:05:34 kernel: wmi_unified_vdev_stop_send for vap 0 (dab00000)
May  5 13:05:34 kernel: STOPPED EVENT for vap 0 (dab00000)
May  5 13:05:34 kernel: wmi_unified_vdev_down_send for vap 0 (dab00000)
May  5 13:05:34 kernel: su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 3
May  5 13:05:34 kernel: 
May  5 13:05:34 kernel:  DES SSID SET=ASUS_38_5G
May  5 13:05:34 kernel: [wifi0] FWLOG: [45860] WAL_DBGID_SECURITY_ENCR_EN (  )
May  5 13:05:34 kernel: [wifi0] FWLOG: [45860] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
May  5 13:05:34 kernel: [wifi0] FWLOG: [45895] vap-0 VDEV_MGR_VDEV_START ( 0x96c, 0x2, 0x0, 0x0 )
May  5 13:05:34 kernel: [wifi0] FWLOG: [45896] WAL channel change freq=2412, mode=5 flags=0 rx_ok=1 tx_ok=1
May  5 13:05:34 kernel: [wifi0] FWLOG: [46225] VDEV_MGR_HP_START_TIME ( 0x0, 0x96c, 0x1595001 )
May  5 13:05:34 kernel: [wifi0] FWLOG: [46225] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 )
May  5 13:05:34 kernel: [wifi0] FWLOG: [46225] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
May  5 13:05:34 kernel: [wifi0] FWLOG: [46225] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x96c, 0x0, 0x0 )
May  5 13:05:34 kernel: [wifi0] FWLOG: [46252] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
May  5 13:05:34 kernel: [wifi0] FWLOG: [46252] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
May  5 13:05:34 kernel:  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
May  5 13:05:34 kernel: xhci-hcd xhci-hcd.1: xHCI xhci_drop_endpoint called with disabled ep d837eb00
May  5 13:05:34 kernel:  DEVICE IS DOWN ifname=ath1
May  5 13:05:34 kernel:  DEVICE IS DOWN ifname=ath1
May  5 13:05:34 kernel: OL vap_start +
May  5 13:05:34 kernel: wmi_unified_vdev_start_send for vap 0 (d9830000)
May  5 13:05:34 kernel: OL vap_start -
May  5 13:05:34 kernel: ol_vdev_start_resp_ev for vap 0 (d9830000)
May  5 13:05:34 kernel: ol_ath_wmm_update:
May  5 13:05:34 kernel: su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 3
May  5 13:05:34 kernel: wmi_unified_vdev_up_send for vap 0 (d9830000)
May  5 13:05:34 kernel: __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
May  5 13:05:34 kernel: ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
May  5 13:05:34 kernel: wmi_unified_vdev_stop_send for vap 0 (d9830000)
May  5 13:05:34 kernel: STOPPED EVENT for vap 0 (d9830000)
May  5 13:05:34 kernel: wmi_unified_vdev_down_send for vap 0 (d9830000)
May  5 13:05:35 kernel: [wifi1] FWLOG: [46514] WAL_DBGID_SECURITY_ENCR_EN (  )
May  5 13:05:35 kernel: [wifi1] FWLOG: [46514] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
May  5 13:05:35 kernel: [wifi1] FWLOG: [46549] vap-0 VDEV_MGR_VDEV_START ( 0x1478, 0x2, 0x0, 0x0 )
May  5 13:05:35 kernel: [wifi1] FWLOG: [46549] WAL channel change freq=5240, mode=8 flags=0 rx_ok=1 tx_ok=1
May  5 13:05:35 kernel: [wifi1] FWLOG: [46837] VDEV_MGR_HP_START_TIME ( 0x0, 0x1478, 0xfd2000 )
May  5 13:05:35 kernel: [wifi1] FWLOG: [46837] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 )
May  5 13:05:35 kernel: [wifi1] FWLOG: [46837] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
May  5 13:05:35 kernel: [wifi1] FWLOG: [46837] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x1478, 0x0, 0x0 )
May  5 13:05:35 kernel: [wifi1] FWLOG: [46875] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
May  5 13:05:35 kernel: [wifi1] FWLOG: [46875] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
May  5 13:05:45 kernel: ol_ath_vap_set_param: Now supported MCAST RATE is 6000(kbps) and rate code: 0x3
May  5 13:05:45 kernel: ol_ath_vap_set_param: Now supported MCAST RATE is 1000(kbps) and rate code: 0x43
May  5 13:05:52 nat: apply nat rules (/tmp/nat_rules__eth1)
May  5 13:05:52 kernel: nf_conntrack_rtsp v0.6.21 loading
May  5 13:05:52 kernel: nf_nat_rtsp v0.6.21 loading
May  5 13:05:52 zcip client: configured 169.254.68.17
May  5 13:05:59 reboot scheduler: [timecheck] NTP sync error
May  5 13:06:06 pppd[640]: Timeout waiting for PADO packets
May  5 13:06:29 reboot scheduler: [timecheck] NTP sync error
May  5 13:06:29 rc_service: wanduck 497:notify_rc restart_wan_if 0
May  5 13:06:29 pppd[640]: Unable to complete PPPoE Discovery
May  5 13:06:30 Mastiff: exit.
May  5 13:06:31 pppd[948]: pppd 2.4.7 started by Administrator, uid 0
May  5 13:06:33 rc_service: wanduck 497:notify_rc restart_wan_if 1
May  5 13:06:41 WAN(1) Connection: ISP's DHCP did not function properly.
May  5 13:06:42 nat: apply nat rules (/tmp/nat_rules_eth3_eth3)
May  5 13:06:42 wan: finish adding multi routes
May  5 13:06:46 WAN(1) Connection: WAN was restored.
May  5 13:06:48 ntp: start NTP update
Sep 11 06:43:34 rc_service: ntp 1041:notify_rc restart_diskmon
Sep 11 06:43:34 disk_monitor: Finish
Sep 11 06:43:34 disk monitor: be idle
Sep 11 06:43:38 zcip client: configured 169.254.68.17
Sep 11 06:43:41 kernel: SHN Release Version: 2.0.1 3529123_patch
Sep 11 06:43:41 kernel: UDB Core Version: 0.2.14 r3529123
Sep 11 06:43:41 kernel: pcc register
Sep 11 06:43:41 kernel: sizeof forward pkt param = 192

Hi. I have an Asus Ac3200 for about 3 years+. I have unifi 800mb internet line. Never had the speedtest goes above 300mb. TM has tested with their modem and can achieve 700+ mb speed. According to the technician, it seems that the AC3200 has limit the speed to 300mb and does not allow to go above that.

Any recommendations. Tq.

I’ve got 2x AC68U units set up as a Wifi mesh. Upstairs and downstairs in the middle of the house.

Recently, I find my MiBox S and mobile device losing internet connection. Mostly in the night and some times during the day.

1. How do I troubleshoot this?

2. Could it be a router overheat issue? I’ve not equipped the routers with those fans I’ve read in the forums.

3. Or, is there any other idea why this happens?

just bought asus tuf ax3000 yesterday just only saw limited setting in web ui.i need to use multiple vpn feature.anything i missed to unlock other option setting? now using latest firmware

I own the MiBox S, it is a known issue with MiBox. There are a ton of complain about this on reddit as well.

One of the software update fixed it but the issue is back in another update. I couldn't remember which version it is but perhaps you can try performing a system update first.

I ended up buying a cheap Ugreen USB Ethernet adapter as the Wi-Fi on that cheap Xiaomi box is just too glitchy.
VPN feature not available in access point mode.

VPN is only available in router mode.

I own the MiBox S, it is a known issue with MiBox. There are a ton of complain about this on reddit as well.

One of the software update fixed it but the issue is back in another update. I couldn't remember which version it is but perhaps you can try performing a system update first.

I ended up buying a cheap Ugreen USB Ethernet adapter as the Wi-Fi on that cheap Xiaomi box is just too glitchy.
VPN feature not available in access point mode.

ASUSmy, please help

Hi AsusMY,

I'm using BRT-AC828 firmware 3.0.0.4.382_70348-gb917269.

Yesterday around 6pm my router totally hang, this morning 6am+ power off/on only it works again.
I suspect too many log causing it to hang? Can you advise what can I do? Thanks.
This is business router therefore uptime important, best if there's way to implement auto-reboot when hang. Thanks.

Detail
Yesterday morning our ISP Unifi was down > failover to secondary WAN UnifiAir > continue to work.
Since then log keep showing "Timeout waiting for PADO packets" all day possible due to Unifi down then around 6pm router totally hang.
Below is log, since 6pm no more lag because router hang.

Here i have my home network diagram summarized.
I am currently having a mesh network as shown in the picture.

The issue i am having is, the laptop is only getting 160Mbps despite having good link speed (also good signal level).

I have set manual channel setting for the wifi (thats why the BW locks to 160MHz). Also i have disabled all automatic power saving modes.

I am not sure what else setting i am missing. In order to make my laptop throughput to increase. Its quite strange knowing that the backhaul speed is very high. Maybe someone can let me know if any specific parameter to check or to set.

Hi. I have an Asus Ac3200 for about 3 years+. I have unifi 800mb internet line. Never had the speedtest goes above 300mb. TM has tested with their modem and can achieve 700+ mb speed. According to the technician, it seems that the AC3200 has limit the speed to 300mb and does not allow to go above that.

Any recommendations. Tq.

so in AP mode i just get less feature rite...im using with huawei b818 4g modem and set as an AP mode to help distribute wifi..

so in AP mode i just get less feature rite...im using with huawei b818 4g modem and set as an AP mode to help distribute wifi..

Hi mostwanted82,

You can send a feedback using the router GUI and PM me your email address, will request RD to have a look at the log.

Thank you