ASUS Malaysia Networking User & Technical Support

Lowyat.NET forums

Lowyat.NET Kopitiam Garage Sales

Lowyat.NET Rules and Regulations FAQ Help Search Members

Welcome Guest ( Log In | Register )

Lowyat.NET -> Networks and Broadband

Bump Topic Add Reply RSS Feed

826 Pages « < 530 531 532 533 534 > » Bottom

Outline · [ Standard ] · Linear+

Home Networking ASUS Malaysia Networking User & Technical Support, Managed by ASUS Malaysia Representative

views

jusbella	Nov 15 2019, 12:36 PM Show posts by this member only \| Post #10621
Look at all my stars!! Senior Member 3,034 posts Joined: Dec 2011	QUOTE(uberific @ Nov 14 2019, 11:00 PM) Is this correct? what does it mean by LAN4. i played around with the Unifi home and unifi business. Funny thing is that i cant get an IP using uinifi home but i got connected with no internet on unifi business That's correct setting, try capture how ur connection between modem and the router.
Card PM	Report Top Like Quote Reply

wyyew	Nov 16 2019, 11:15 AM Show posts by this member only \| Post #10622
Getting Started Junior Member 264 posts Joined: Jan 2003	Hi , I would like to seek for advise as my Asus router RT-AC86U(local unit) with firmware 3.0 updated. The issue happened since yesterday the 5g bandwidth unable to connect and it showed "couldn't assign IP" from my android phone. but it able to connect thru my laptop and speed was extremely slow. Action being taken: Reset routers and switch off those router firewall. Please share whether the device need to get replacement or any configuration problem.
Card PM	Report Top Like Quote Reply

blacktubi	Nov 16 2019, 11:27 AM Show posts by this member only \| Post #10623
- Elite 8,409 posts Joined: Jul 2008	QUOTE(wyyew @ Nov 16 2019, 11:15 AM) Hi , I would like to seek for advise as my Asus router RT-AC86U(local unit) with firmware 3.0 updated. The issue happened since yesterday the 5g bandwidth unable to connect and it showed "couldn't assign IP" from my android phone. but it able to connect thru my laptop and speed was extremely slow. Action being taken: Reset routers and switch off those router firewall. Please share whether the device need to get replacement or any configuration problem. Send it back for RMA. Likely a 5Ghz radio failure.
Card PM	Report Top Like Quote Reply

wyyew	Nov 16 2019, 12:21 PM Show posts by this member only \| Post #10624
Getting Started Junior Member 264 posts Joined: Jan 2003	thank for prompt replying. first time using asus router and having such problems. interesting products
Card PM	Report Top Like Quote Reply

Jjuggler	Nov 16 2019, 12:32 PM Show posts by this member only \| Post #10625
Narcissistic Genius Senior Member 1,341 posts Joined: Dec 2016	QUOTE(wyyew @ Nov 16 2019, 12:21 PM) thank for prompt replying. first time using asus router and having such problems. interesting products It solely depends on luck. I am using the lower end of AC86U, the AC68U and I am happy with the router performance and still receives firmware updates (for stock firmware - though im using merlin for customization & diversion). My first asus router was RT-N14UHP back in the unifi 5Mbps to 50Mbps. Wait until you try out the other two brands out there.
Card PM	Report Top Like Quote Reply

NightFelix	Nov 16 2019, 01:02 PM Show posts by this member only \| Post #10626
Samsung Exynos All Stars 17,467 posts Joined: May 2008 From: Lazada	Using Streamyx 8MBps (not sure unifi coming or not, maybe future go for Unifi Air if stable) with around 12-15 wireless device (phone/tab/pc) connecting to it, double storey house. House got 5 people using 1 active device at the same time. Please recommend me a router guys. This post has been edited by NightFelix: Nov 16 2019, 01:03 PM
Card PM	Report Top Like Quote Reply

Jjuggler	Nov 16 2019, 01:13 PM Show posts by this member only \| Post #10627
Narcissistic Genius Senior Member 1,341 posts Joined: Dec 2016	QUOTE(NightFelix @ Nov 16 2019, 01:02 PM) Using Streamyx 8MBps (not sure unifi coming or not, maybe future go for Unifi Air if stable) with around 12-15 wireless device (phone/tab/pc) connecting to it, double storey house. House got 5 people using 1 active device at the same time. Please recommend me a router guys. If you're looking for an ASUS DSL routers, kindly refer here and do check-out the online reviews. I can't vouch the best DSL routers since I am not using them.
Card PM	Report Top Like Quote Reply

kokweng1	Nov 16 2019, 02:11 PM Show posts by this member only \| Post #10628
Poring Senior Member 918 posts Joined: Feb 2009 From: Malaysia	Hi all, I using RT-AC68U router and recently the WIFI seem to be auto-off after x hour Sometimes auto-off after few hour or 1day Currently using firmware version : 3.0.0.4.384_81351 Should i downgrade to older firmware ? Some recent log » Click to show Spoiler - click again to hide... « CODE Nov 16 11:00:09 disk_monitor: Got SIGALRM... Nov 16 11:08:21 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth C0:BD:D1:85:6C:6C, status: 0, reason: d11 RC reserved (0) Nov 16 11:08:21 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc C0:BD:D1:85:6C:6C, status: 0, reason: d11 RC reserved (0) Nov 16 13:14:16 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 44:58:00:00:00:00, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:14:16 syslog: WLCEVENTD wlceventd_proc_event(386): eth2: Deauth_ind 30:00:17:00:F6:07, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:14:16 rc_service: watchdog 224:notify_rc stop_obd Nov 16 13:15:13 rc_service: watchdog 224:notify_rc stop_obd Nov 16 13:15:20 acsd: selected channel spec: 0x100a (10) Nov 16 13:15:20 acsd: Adjusted channel spec: 0x100a (10) Nov 16 13:15:20 acsd: selected DFS-exit channel spec: 0x100a (10) Nov 16 13:15:20 acsd: selected channel spec: 0x100a (10) Nov 16 13:15:20 acsd: Adjusted channel spec: 0x100a (10) Nov 16 13:15:20 acsd: selected channel spec: 0x100a (10) Nov 16 13:15:20 acsd: acs_set_chspec: 0x100a (10) for reason APCS_INIT Nov 16 13:15:22 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:15:22 acsd: Adjusted channel spec: 0xe09b (149/80) Nov 16 13:15:22 acsd: selected DFS-exit channel spec: 0xe09b (149/80) Nov 16 13:15:22 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:15:22 acsd: Adjusted channel spec: 0xe09b (149/80) Nov 16 13:15:22 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:15:22 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INIT Nov 16 13:15:22 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:15:22 syslog: WLCEVENTD wlceventd_proc_event(430): eth1: ReAssoc 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:15:23 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) Nov 16 13:15:23 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) Nov 16 13:15:28 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 00:00:00:00:00:00, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:15:28 rc_service: watchdog 224:notify_rc stop_obd May 5 13:05:11 kernel: klogd started: BusyBox v1.25.1 (2019-11-09 04:33:23 CST) May 5 13:05:11 kernel: Linux version 2.6.36.4brcmarm (root@asus) (gcc version 4.5.3 (Buildroot 2012.02) ) #1 SMP PREEMPT Sat Nov 9 04:38:23 CST 2019 May 5 13:05:11 kernel: CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7f May 5 13:05:11 kernel: CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache May 5 13:05:11 kernel: Machine: Northstar Prototype May 5 13:05:11 kernel: Ignoring unrecognised tag 0x00000000 May 5 13:05:11 kernel: Memory policy: ECC disabled, Data cache writealloc May 5 13:05:11 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60416 May 5 13:05:11 kernel: Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit earlyprintk debug May 5 13:05:11 kernel: Memory: 255488k/255488k available, 6656k reserved, 0K highmem May 5 13:05:11 kernel: Virtual kernel memory layout: May 5 13:05:11 kernel: vector : 0xffff0000 - 0xffff1000 ( 4 kB) May 5 13:05:11 kernel: fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) May 5 13:05:11 kernel: DMA : 0xf7e00000 - 0xffe00000 ( 128 MB) May 5 13:05:11 kernel: vmalloc : 0xd0800000 - 0xf0000000 ( 504 MB) May 5 13:05:11 kernel: lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) May 5 13:05:11 kernel: modules : 0xbf000000 - 0xc0000000 ( 16 MB) May 5 13:05:11 kernel: .init : 0xc0008000 - 0xc003d000 ( 212 kB) May 5 13:05:11 kernel: .text : 0xc003d000 - 0xc03aa000 (3508 kB) May 5 13:05:11 kernel: .data : 0xc03c2000 - 0xc03e5140 ( 141 kB) May 5 13:05:11 kernel: * Invalid signature of oopsbuf: 00-00-00-00-00-00-00-00 (len 0) May 5 13:05:11 kernel: External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored. May 5 13:05:11 kernel: Mount-cache hash table entries: 512 May 5 13:05:11 kernel: CPU1: Booted secondary processor May 5 13:05:11 kernel: Found a AMD NAND flash: May 5 13:05:11 kernel: Total size: 128MB May 5 13:05:11 kernel: Block size: 128KB May 5 13:05:11 kernel: Page Size: 2048B May 5 13:05:11 kernel: OOB Size: 64B May 5 13:05:11 kernel: Sector size: 512B May 5 13:05:11 kernel: Spare size: 16B May 5 13:05:11 kernel: ECC level: 8 (8-bit) May 5 13:05:11 kernel: Device ID: 0x 1 0xf1 0x80 0x1d 0x 1 0xf1 May 5 13:05:11 kernel: bio: create slab <bio-0> at 0 May 5 13:05:11 kernel: PCI: no core May 5 13:05:11 kernel: PCI: no core May 5 13:05:11 kernel: PCI: Fixing up bus 0 May 5 13:05:11 kernel: PCI: Fixing up bus 0 May 5 13:05:11 kernel: PCI: Fixing up bus 1 May 5 13:05:11 kernel: PCI: Fixing up bus 0 May 5 13:05:11 kernel: PCI: Fixing up bus 2 May 5 13:05:11 kernel: VFS: Disk quotas dquot_6.5.2 May 5 13:05:11 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) May 5 13:05:11 kernel: pflash: found no supported devices May 5 13:05:11 kernel: bcmsflash: found no supported devices May 5 13:05:11 kernel: Boot partition size = 524288(0x80000) May 5 13:05:11 kernel: lookup_nflash_rootfs_offset: offset = 0x200000 May 5 13:05:11 kernel: nflash: squash filesystem with lzma found at block 28 May 5 13:05:11 kernel: Creating 4 MTD partitions on "nflash": May 5 13:05:11 kernel: 0x000000000000-0x000000080000 : "boot" May 5 13:05:11 kernel: 0x000000080000-0x000000200000 : "nvram" May 5 13:05:11 kernel: 0x000000200000-0x000004000000 : "linux" May 5 13:05:11 kernel: 0x00000039d3bc-0x000004000000 : "rootfs" May 5 13:05:11 kernel: Registering the dns_resolver key type May 5 13:05:11 kernel: Spare area=64 eccbytes 56, ecc bytes located at: May 5 13:05:11 kernel: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63 May 5 13:05:11 kernel: Available 7 bytes at (off,len): May 5 13:05:11 kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) May 5 13:05:11 kernel: Options: NO_AUTOINCR,NO_READRDY,BBT_SCAN2NDPAGE, May 5 13:05:11 kernel: Creating 2 MTD partitions on "brcmnand": May 5 13:05:11 kernel: 0x000004000000-0x000007ec0000 : "brcmnand" May 5 13:05:11 kernel: 0x000007ec0000-0x000008000000 : "asus" May 5 13:05:11 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:3. May 5 13:05:11 kernel: ctf: module license 'Proprietary' taints kernel. May 5 13:05:11 kernel: Disabling lock debugging due to kernel taint May 5 13:05:11 kernel: et_module_init: passivemode set to 0x0 May 5 13:05:11 kernel: et_module_init: txworkq set to 0x0 May 5 13:05:11 kernel: et_module_init: et_txq_thresh set to 0xce4 May 5 13:05:11 kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.126 (r561982) May 5 13:05:11 kernel: et_probe: mvlan vid[0]: 0 May 5 13:05:11 kernel: et_probe: mvlan vid[1]: 0 May 5 13:05:11 kernel: et_probe: mvlan en 0 May 5 13:05:11 kernel: dpsta_init: Jun 12 2019 23:31:45 msglevel 0x1 May 5 13:05:11 kernel: wl_module_init: passivemode set to 0x0 May 5 13:05:11 kernel: wl_module_init: igs set to 0x0 May 5 13:05:11 kernel: wl_module_init: txworkq set to 0x0 May 5 13:05:11 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0 May 5 13:05:11 kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982) May 5 13:05:11 kernel: wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0 May 5 13:05:11 kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982) May 5 13:05:11 kernel: Empty flash at 0x03c5f308 ends at 0x03c5f800 May 5 13:05:11 kernel: et0: et_mvlan_netdev_event: event 16 for vlan1 mvlan_en 0 May 5 13:05:11 kernel: et0: et_mvlan_netdev_event: event 5 for vlan1 mvlan_en 0 May 5 13:05:11 kernel: et0: et_mvlan_netdev_event: event 16 for vlan2 mvlan_en 0 May 5 13:05:11 kernel: et0: et_mvlan_netdev_event: event 5 for vlan2 mvlan_en 0 May 5 13:05:12 kernel: et0: et_mvlan_netdev_event: event 6 for vlan2 mvlan_en 0 May 5 13:05:12 kernel: et0: et_mvlan_netdev_event: event 17 for vlan2 mvlan_en 0 May 5 13:05:12 kernel: et0: et_mvlan_netdev_event: event 16 for vlan500 mvlan_en 0 May 5 13:05:12 kernel: et0: et_mvlan_netdev_event: event 5 for vlan500 mvlan_en 0 May 5 13:05:12 kernel: et0: et_mvlan_netdev_event: event 13 for vlan1 mvlan_en 0 May 5 13:05:12 kernel: et0: et_mvlan_netdev_event: event 1 for vlan1 mvlan_en 0 May 5 13:05:13 nat: apply redirect rules May 5 13:05:15 RT-AC68U: start https:8443 May 5 13:05:15 RT-AC68U: start httpd:80 May 5 13:05:16 jffs2: valid logs(1) May 5 13:05:16 hour monitor: daemon is starting May 5 13:05:16 disk monitor: be idle May 5 13:05:16 syslog: Generating SSL certificate... May 5 13:05:16 ERP: The model isn't under EU SKU! May 5 13:05:16 miniupnpd[268]: version 1.9 started May 5 13:05:16 miniupnpd[268]: HTTP listening on port 58973 May 5 13:05:16 miniupnpd[268]: Listening for NAT-PMP/PCP traffic on port 5351 May 5 13:05:16 avahi-daemon[273]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! May 5 13:05:16 syslog: Generating SSL certificate... May 5 13:05:17 lldpd[294]: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted May 5 13:05:17 lldpd[294]: cannot get ethtool link information with GSET (requires 2.6.19+): Operation not permitted May 5 13:05:17 avahi-daemon[273]: Alias name "RT-AC68U" successfully established. May 5 13:05:18 WAN Connection: Fail to connect with some issues. May 5 13:05:20 Mastiff: init May 5 13:05:21 rc_service: watchdog 228:notify_rc stop_obd May 5 13:05:21 syslog: module ax88179_178a not found in modules.dep May 5 13:05:21 wan: mac clone: [wan0_hwaddr] == [1C:5F:2B:00:4A:C3] May 5 13:05:21 kernel: et0: et_mvlan_netdev_event: event 8 for vlan500 mvlan_en 0 May 5 13:05:21 kernel: et0: et_mvlan_netdev_event: event 13 for vlan500 mvlan_en 0 May 5 13:05:21 kernel: et0: et_mvlan_netdev_event: event 1 for vlan500 mvlan_en 0 May 5 13:05:21 kernel: et0: et_mvlan_netdev_event: event 4 for vlan500 mvlan_en 0 May 5 13:05:23 pppd[399]: pppd 2.4.7 started by admin, uid 0 May 5 13:05:25 syslog: module ledtrig-usbdev not found in modules.dep May 5 13:05:25 syslog: module leds-usb not found in modules.dep May 5 13:05:26 kernel: SCSI subsystem initialized May 5 13:05:27 kernel: scsi 0:0:0:0: Direct-Access External USB3.0 0204 PQ: 0 ANSI: 6 May 5 13:05:27 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 5 13:05:27 kernel: sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) May 5 13:05:27 kernel: sd 0:0:0:0: [sda] Write Protect is off May 5 13:05:27 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through May 5 13:05:27 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through May 5 13:05:27 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through May 5 13:05:27 kernel: sd 0:0:0:0: [sda] Attached SCSI disk May 5 13:05:29 acsd: selected channel spec: 0x100a (10) May 5 13:05:29 acsd: Adjusted channel spec: 0x100a (10) May 5 13:05:29 acsd: selected DFS-exit channel spec: 0x100a (10) May 5 13:05:29 acsd: selected channel spec: 0x100a (10) May 5 13:05:29 acsd: Adjusted channel spec: 0x100a (10) May 5 13:05:29 acsd: selected channel spec: 0x100a (10) May 5 13:05:29 acsd: acs_set_chspec: 0x100a (10) for reason APCS_INIT May 5 13:05:31 acsd: selected channel spec: 0xe09b (149/80) May 5 13:05:31 acsd: Adjusted channel spec: 0xe09b (149/80) May 5 13:05:31 acsd: selected DFS-exit channel spec: 0xe09b (149/80) May 5 13:05:31 acsd: selected channel spec: 0xe09b (149/80) May 5 13:05:31 acsd: Adjusted channel spec: 0xe09b (149/80) May 5 13:05:31 acsd: selected channel spec: 0xe09b (149/80) May 5 13:05:31 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INIT May 5 13:05:33 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) May 5 13:05:33 syslog: WLCEVENTD wlceventd_proc_event(430): eth1: ReAssoc 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) May 5 13:05:35 usb: USB ntfs fs at /dev/sda6 mounted on /tmp/mnt/HIKVISION. May 5 13:05:36 rc_service: hotplug 563:notify_rc restart_nasapps May 5 13:05:36 iTunes: daemon is stoped May 5 13:05:36 FTP Server: daemon is stoped May 5 13:05:36 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) May 5 13:05:36 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) May 5 13:05:37 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 94:0E:6B:A7:C7:EE, status: 0, reason: d11 RC reserved (0) May 5 13:05:37 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 94:0E:6B:A7:C7:EE, status: 0, reason: d11 RC reserved (0) May 5 13:05:38 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) May 5 13:05:38 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) May 5 13:05:39 Samba Server: smb daemon is stoped May 5 13:05:39 kernel: gro disabled May 5 13:05:40 Timemachine: daemon is stoped May 5 13:05:40 miniupnpd[268]: shutting down MiniUPnPd May 5 13:05:41 kernel: gro enabled with interval 2 May 5 13:05:41 avahi-daemon[640]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! May 5 13:05:42 avahi-daemon[640]: Alias name "RT-AC68U" successfully established. May 5 13:05:43 Samba Server: daemon is started May 5 13:05:44 miniupnpd[667]: version 1.9 started May 5 13:05:44 miniupnpd[667]: HTTP listening on port 34926 May 5 13:05:44 miniupnpd[667]: Listening for NAT-PMP/PCP traffic on port 5351 May 5 13:05:47 usb: USB ntfs fs at /dev/sda5 mounted on /tmp/mnt/XIAOMI. May 5 13:05:47 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 00:00:00:00:00:00, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) May 5 13:05:47 syslog: WLCEVENTD wlceventd_proc_event(386): eth2: Deauth_ind 00:00:00:00:00:00, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) May 5 13:05:47 rc_service: watchdog 228:notify_rc stop_obd May 5 13:05:49 rc_service: hotplug 562:notify_rc restart_nasapps May 5 13:05:49 iTunes: daemon is stoped May 5 13:05:49 FTP Server: daemon is stoped May 5 13:05:50 Samba Server: smb daemon is stoped May 5 13:05:50 kernel: gro disabled May 5 13:05:51 Timemachine: daemon is stoped May 5 13:05:51 miniupnpd[667]: shutting down MiniUPnPd May 5 13:05:51 kernel: gro enabled with interval 2 May 5 13:05:51 avahi-daemon[720]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! May 5 13:05:52 avahi-daemon[720]: Alias name "RT-AC68U" successfully established. May 5 13:05:53 Samba Server: daemon is started May 5 13:05:53 FTP server: daemon is started May 5 13:05:53 miniupnpd[743]: version 1.9 started May 5 13:05:53 miniupnpd[743]: HTTP listening on port 34954 May 5 13:05:53 miniupnpd[743]: Listening for NAT-PMP/PCP traffic on port 5351 May 5 13:05:53 nat: apply nat rules (/tmp/nat_rules__vlan500) May 5 13:05:56 kernel: nf_conntrack_rtsp v0.6.21 loading May 5 13:05:56 kernel: nf_nat_rtsp v0.6.21 loading May 5 13:05:56 zcip client: configured 169.254.248.244 May 5 13:05:56 miniupnpd[743]: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping May 5 13:05:56 nat: apply redirect rules May 5 13:05:58 pppd[399]: Timeout waiting for PADO packets May 5 13:06:27 rc_service: watchdog 228:notify_rc stop_obd May 5 13:06:33 pppd[399]: Connected to 5c:45:27:cf:b5:c5 via interface vlan500 May 5 13:06:33 pppd[399]: Connect: ppp0 <--> vlan500 May 5 13:06:33 acsd: selected channel spec: 0x1001 (1) May 5 13:06:33 acsd: Adjusted channel spec: 0x1001 (1) May 5 13:06:33 acsd: selected DFS-exit channel spec: 0x1001 (1) May 5 13:06:33 acsd: selected channel spec: 0x1001 (1) May 5 13:06:33 acsd: Adjusted channel spec: 0x1001 (1) May 5 13:06:33 acsd: selected channel spec: 0x1001 (1) May 5 13:06:33 acsd: acs_set_chspec: 0x1001 (1) for reason APCS_INIT May 5 13:06:35 acsd: selected channel spec: 0xe29b (157/80) May 5 13:06:35 acsd: Adjusted channel spec: 0xe29b (157/80) May 5 13:06:35 acsd: selected DFS-exit channel spec: 0xe29b (157/80) May 5 13:06:35 acsd: selected channel spec: 0xe29b (157/80) May 5 13:06:35 acsd: Adjusted channel spec: 0xe29b (157/80) May 5 13:06:35 acsd: selected channel spec: 0xe29b (157/80) May 5 13:06:35 acsd: acs_set_chspec: 0xe29b (157/80) for reason APCS_INIT May 5 13:06:36 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth D4:6E:0E:08:D3:7A, status: 0, reason: d11 RC reserved (0) May 5 13:06:36 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc D4:6E:0E:08:D3:7A, status: 0, reason: d11 RC reserved (0) May 5 13:06:36 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) May 5 13:06:36 pppd[399]: PAP authentication succeeded May 5 13:06:36 pppd[399]: peer from calling number 5C:45:27:CF:B5:C5 authorized May 5 13:06:36 syslog: WLCEVENTD wlceventd_proc_event(430): eth1: ReAssoc 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) May 5 13:06:37 pppd[399]: local IP address 42.191.39.184 May 5 13:06:37 pppd[399]: remote IP address 10.233.33.38 May 5 13:06:37 nat: apply nat rules (/tmp/nat_rules_ppp0_vlan500) May 5 13:06:37 miniupnpd[743]: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping May 5 13:06:37 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) May 5 13:06:37 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) May 5 13:06:38 wan: finish adding multi routes May 5 13:06:38 miniupnpd[743]: shutting down MiniUPnPd May 5 13:06:38 miniupnpd[1006]: version 1.9 started May 5 13:06:38 miniupnpd[1006]: HTTP listening on port 36411 May 5 13:06:38 miniupnpd[1006]: Listening for NAT-PMP/PCP traffic on port 5351 May 5 13:06:41 WAN Connection: WAN was restored. May 5 13:06:43 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0 May 5 13:06:43 ddns update: ez-ipupdate: starting... May 5 13:06:43 ddns update: asus_private() interface =ppp0 May 5 13:06:43 ddns update: g_asus_ddns_mode == 2 May 5 13:06:44 ddns update: connected to nwsrv-ns1.asus.com (103.10.4.108) on port 443. May 5 13:06:44 ntp: start NTP update Nov 16 13:44:37 ddns update: Asus update entry:: return: HTTP/1.1 200 OK^M Date: Sat, 16 Nov 2019 05:44:36 GMT^M Server: Apache^M X-Powered-By: PHP/5.6.30^M Content-Length: 0^M Connection: close^M Content-Type: text/html; charset=UTF-8^M ^M Nov 16 13:44:37 ddns update: retval= 0, ddns_return_code (,200) Nov 16 13:44:37 ddns update: asusddns_update: 0 Nov 16 13:44:37 rc_service: ntp 1003:notify_rc restart_diskmon Nov 16 13:44:37 disk_monitor: Finish Nov 16 13:44:37 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) Nov 16 13:44:37 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) Nov 16 13:44:38 check_watchdog: [check_watchdog] restart watchdog for no heartbeat Nov 16 13:44:38 rc_service: check_watchdog 229:notify_rc restart_watchdog Nov 16 13:44:38 ddns: ddns update ok Nov 16 13:44:40 ddns update: exit_main Nov 16 13:44:40 disk monitor: be idle Nov 16 13:44:41 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 00:00:00:00:00:00, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:44:41 rc_service: watchdog 1052:notify_rc stop_obd Nov 16 13:44:53 crond[219]: time disparity of 806438 minutes detected Nov 16 13:44:56 kernel: SHN Release Version: 2.0.1 890c91d Nov 16 13:44:56 kernel: UDB Core Version: 0.2.18 Nov 16 13:44:56 kernel: sizeof forward pkt param = 192 Nov 16 13:44:56 BWDPI: fun bitmap = 3 Nov 16 13:45:00 nat: apply nat rules (/tmp/nat_rules_ppp0_vlan500) Nov 16 13:45:09 hour monitor: ntp sync fail, will retry after 120 sec Nov 16 13:45:15 watchdog: start ddns. Nov 16 13:45:15 rc_service: watchdog 1052:notify_rc restart_ddns Nov 16 13:45:15 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0 Nov 16 13:45:16 ddns update: ez-ipupdate: starting... Nov 16 13:45:16 ddns update: asus_private() interface =ppp0 Nov 16 13:45:16 ddns update: g_asus_ddns_mode == 2 Nov 16 13:45:16 ddns update: connected to nwsrv-ns1.asus.com (103.10.4.108) on port 443. Nov 16 13:45:16 ddns update: Asus update entry:: return: HTTP/1.1 200 OK^M Date: Sat, 16 Nov 2019 05:45:16 GMT^M Server: Apache^M X-Powered-By: PHP/5.6.30^M Content-Length: 0^M Connection: close^M Content-Type: text/html; charset=UTF-8^M ^M Nov 16 13:45:16 ddns update: retval= 0, ddns_return_code (,200) Nov 16 13:45:16 ddns update: asusddns_update: 0 Nov 16 13:45:17 rc_service: watchdog 1052:notify_rc stop_obd Nov 16 13:45:18 ddns: ddns update ok Nov 16 13:45:18 ddns update: exit_main Nov 16 13:45:24 acsd: selected channel spec: 0x1001 (1) Nov 16 13:45:24 acsd: Adjusted channel spec: 0x1001 (1) Nov 16 13:45:24 acsd: selected DFS-exit channel spec: 0x1001 (1) Nov 16 13:45:24 acsd: selected channel spec: 0x1001 (1) Nov 16 13:45:24 acsd: Adjusted channel spec: 0x1001 (1) Nov 16 13:45:24 acsd: selected channel spec: 0x1001 (1) Nov 16 13:45:24 acsd: acs_set_chspec: 0x1001 (1) for reason APCS_INIT Nov 16 13:45:26 acsd: selected channel spec: 0xe29b (157/80) Nov 16 13:45:26 acsd: Adjusted channel spec: 0xe29b (157/80) Nov 16 13:45:26 acsd: selected DFS-exit channel spec: 0xe29b (157/80) Nov 16 13:45:26 acsd: selected channel spec: 0xe29b (157/80) Nov 16 13:45:26 acsd: Adjusted channel spec: 0xe29b (157/80) Nov 16 13:45:26 acsd: selected channel spec: 0xe29b (157/80) Nov 16 13:45:26 acsd: acs_set_chspec: 0xe29b (157/80) for reason APCS_INIT Nov 16 13:45:27 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:27 syslog: WLCEVENTD wlceventd_proc_event(430): eth1: ReAssoc 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:28 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 30:07:4D:73:3F:68, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:28 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 30:07:4D:73:3F:68, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:28 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind DA:A1:19:28:73:77, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:45:28 syslog: WLCEVENTD wlceventd_proc_event(386): eth2: Deauth_ind 00:00:00:00:00:00, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:45:28 rc_service: watchdog 1052:notify_rc stop_obd Nov 16 13:45:34 rc_service: watchdog 1052:notify_rc stop_obd Nov 16 13:45:41 acsd: selected channel spec: 0x1002 (2) Nov 16 13:45:41 acsd: Adjusted channel spec: 0x1002 (2) Nov 16 13:45:41 acsd: selected DFS-exit channel spec: 0x1002 (2) Nov 16 13:45:41 acsd: selected channel spec: 0x1002 (2) Nov 16 13:45:41 acsd: Adjusted channel spec: 0x1002 (2) Nov 16 13:45:41 acsd: selected channel spec: 0x1002 (2) Nov 16 13:45:41 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_INIT Nov 16 13:45:43 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:45:43 acsd: Adjusted channel spec: 0xe09b (149/80) Nov 16 13:45:43 acsd: selected DFS-exit channel spec: 0xe09b (149/80) Nov 16 13:45:43 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:45:43 acsd: Adjusted channel spec: 0xe09b (149/80) Nov 16 13:45:43 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:45:43 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INIT Nov 16 13:45:44 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:44 syslog: WLCEVENTD wlceventd_proc_event(430): eth1: ReAssoc 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:46 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 30:07:4D:73:3F:68, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:46 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 30:07:4D:73:3F:68, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:47 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:47 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:51 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 94:0E:6B:A7:C7:EE, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:51 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 94:0E:6B:A7:C7:EE, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:51 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:51 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:53 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 98:DE:D0:19:38:BA, status: 0, reason: d11 RC reserved (0) Nov 16 13:45:53 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 98:DE:D0:19:38:BA, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:08 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth C0:BD:C8:DE:04:0B, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:08 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc C0:BD:C8:DE:04:0B, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:09 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth D4:6E:0E:08:D3:7A, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:09 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc D4:6E:0E:08:D3:7A, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:10 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 74:20:EF:E6:1F:00, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:46:10 syslog: WLCEVENTD wlceventd_proc_event(386): eth2: Deauth_ind 00:00:00:00:00:00, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:46:10 rc_service: watchdog 1052:notify_rc stop_obd Nov 16 13:46:22 rc_service: watchdog 1052:notify_rc stop_obd Nov 16 13:46:29 acsd: selected channel spec: 0x1002 (2) Nov 16 13:46:29 acsd: Adjusted channel spec: 0x1002 (2) Nov 16 13:46:29 acsd: selected DFS-exit channel spec: 0x1002 (2) Nov 16 13:46:29 acsd: selected channel spec: 0x1002 (2) Nov 16 13:46:29 acsd: Adjusted channel spec: 0x1002 (2) Nov 16 13:46:29 acsd: selected channel spec: 0x1002 (2) Nov 16 13:46:29 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_INIT Nov 16 13:46:31 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:46:31 acsd: Adjusted channel spec: 0xe09b (149/80) Nov 16 13:46:31 acsd: selected DFS-exit channel spec: 0xe09b (149/80) Nov 16 13:46:31 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:46:31 acsd: Adjusted channel spec: 0xe09b (149/80) Nov 16 13:46:31 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:46:31 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INIT Nov 16 13:46:31 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 50:EC:50:3D:7B:78, status: 0, reason: Class 3 frame received from nonassociated station (7) Nov 16 13:46:32 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:32 syslog: WLCEVENTD wlceventd_proc_event(430): eth1: ReAssoc 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:33 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth D4:6E:0E:08:D3:7A, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:33 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc D4:6E:0E:08:D3:7A, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:33 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:33 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:35 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 98:DE:D0:19:38:BA, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:35 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 98:DE:D0:19:38:BA, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:44 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:44 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:53 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 94:0E:6B:A7:C7:EE, status: 0, reason: d11 RC reserved (0) Nov 16 13:46:53 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 94:0E:6B:A7:C7:EE, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:25 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 9C:2A:70:19:5C:FA, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:47:25 syslog: WLCEVENTD wlceventd_proc_event(386): eth2: Deauth_ind 9C:2A:70:19:5C:FA, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3) Nov 16 13:47:25 rc_service: watchdog 1052:notify_rc stop_obd Nov 16 13:47:31 rc_service: watchdog 1052:notify_rc stop_obd Nov 16 13:47:38 acsd: selected channel spec: 0x1002 (2) Nov 16 13:47:38 acsd: Adjusted channel spec: 0x1002 (2) Nov 16 13:47:38 acsd: selected DFS-exit channel spec: 0x1002 (2) Nov 16 13:47:38 acsd: selected channel spec: 0x1002 (2) Nov 16 13:47:38 acsd: Adjusted channel spec: 0x1002 (2) Nov 16 13:47:38 acsd: selected channel spec: 0x1002 (2) Nov 16 13:47:38 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_INIT Nov 16 13:47:40 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:47:40 acsd: Adjusted channel spec: 0xe09b (149/80) Nov 16 13:47:40 acsd: selected DFS-exit channel spec: 0xe09b (149/80) Nov 16 13:47:40 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:47:40 acsd: Adjusted channel spec: 0xe09b (149/80) Nov 16 13:47:40 acsd: selected channel spec: 0xe09b (149/80) Nov 16 13:47:40 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INIT Nov 16 13:47:40 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 00:95:69:FB:1D:00, status: 0, reason: Class 3 frame received from nonassociated station (7) Nov 16 13:47:41 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:41 syslog: WLCEVENTD wlceventd_proc_event(430): eth1: ReAssoc 9C:2A:70:19:5C:FA, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:42 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 50:EC:50:3D:7B:78, status: 0, reason: Class 3 frame received from nonassociated station (7) Nov 16 13:47:42 syslog: WLCEVENTD wlceventd_proc_event(386): eth1: Deauth_ind 50:EC:50:3D:7B:78, status: 0, reason: Class 3 frame received from nonassociated station (7) Nov 16 13:47:42 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:42 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 00:95:69:FB:1D:00, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:43 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 98:DE:D0:19:38:BA, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:43 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 98:DE:D0:19:38:BA, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:43 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth D4:6E:0E:08:D3:7A, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:43 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc D4:6E:0E:08:D3:7A, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:44 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:44 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc 50:EC:50:3D:7B:78, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:45 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth CC:21:19:0F:EA:2D, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:45 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc CC:21:19:0F:EA:2D, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:54 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 94:0E:6B:A7:C7:EE, status: 0, reason: d11 RC reserved (0) Nov 16 13:47:54 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 94:0E:6B:A7:C7:EE, status: 0, reason: d11 RC reserved (0) Nov 16 13:49:40 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth C0:BD:C8:DE:04:0B, status: 0, reason: d11 RC reserved (0) Nov 16 13:49:40 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc C0:BD:C8:DE:04:0B, status: 0, reason: d11 RC reserved (0) Nov 16 13:50:30 syslog: WLCEVENTD wlceventd_proc_event(420): eth2: Auth 30:07:4D:73:3F:68, status: 0, reason: d11 RC reserved (0) Nov 16 13:50:30 syslog: WLCEVENTD wlceventd_proc_event(449): eth2: Assoc 30:07:4D:73:3F:68, status: 0, reason: d11 RC reserved (0) Nov 16 13:54:36 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth C0:BD:D1:85:6C:6C, status: 0, reason: d11 RC reserved (0) Nov 16 13:54:36 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc C0:BD:D1:85:6C:6C, status: 0, reason: d11 RC reserved (0) Nov 16 14:00:40 disk_monitor: Got SIGALRM... Edit: I have downgrade firmware version to 3.0.0.4.384_45717 and seem it no longer has issue This post has been edited by kokweng1: Nov 17 2019, 12:50 PM
Card PM	Report Top Like Quote Reply

NightFelix	Nov 16 2019, 02:55 PM Show posts by this member only \| Post #10629
Samsung Exynos All Stars 17,467 posts Joined: May 2008 From: Lazada	QUOTE(Jjuggler @ Nov 16 2019, 01:13 PM) If you're looking for an ASUS DSL routers, kindly refer here and do check-out the online reviews. I can't vouch the best DSL routers since I am not using them. Already using DSL-N16. I was thinking, with my current so many devices connecting to it, can I buy another router to reduce the load on my DSL-N16 or not?
Card PM	Report Top Like Quote Reply

Jjuggler	Nov 16 2019, 03:09 PM Show posts by this member only \| Post #10630
Narcissistic Genius Senior Member 1,341 posts Joined: Dec 2016	QUOTE(NightFelix @ Nov 16 2019, 02:55 PM) Already using DSL-N16. I was thinking, with my current so many devices connecting to it, can I buy another router to reduce the load on my DSL-N16 or not? You can buy another a.k.a powerful router to cope up with your connected clients need and give a permanent rest to your DSL-N16.. If budget is a matter for you, look for another alternative from Dlink or TPlink. While surveying your next DSL router, always compare the specs here. For a better internet experience, always prefer a better router spec even if you're using a (x)DSL connection.
Card PM	Report Top Like Quote Reply

NightFelix	Nov 16 2019, 03:19 PM Show posts by this member only \| Post #10631
Samsung Exynos All Stars 17,467 posts Joined: May 2008 From: Lazada	QUOTE(Jjuggler @ Nov 16 2019, 03:09 PM) You can buy another a.k.a powerful router to cope up with your connected clients need and give a permanent rest to your DSL-N16.. If budget is a matter for you, look for another alternative from Dlink or TPlink. While surveying your next DSL router, always compare the specs here. For a better internet experience, always prefer a better router spec even if you're using a (x)DSL connection. Yeah, thats what I'm planning to do. Can I put the following next to my DSL-N12U? 1. RT-AC58U 2. RT-AC1200G+ 3. RT-AC1300UHP I check this few quite okay spec. Maybe in the future when UniFi 10MB/100MB I can benefit from it. Edit: I just realized mine is older model. Not the DSL-N16, is the DSL-N12U This post has been edited by NightFelix: Nov 16 2019, 03:23 PM
Card PM	Report Top Like Quote Reply

Jjuggler	Nov 16 2019, 03:30 PM Show posts by this member only \| Post #10632
Narcissistic Genius Senior Member 1,341 posts Joined: Dec 2016	QUOTE(NightFelix @ Nov 16 2019, 03:19 PM) Yeah, thats what I'm planning to do. Can I put the following next to my DSL-N12U? 1. RT-AC58U 2. RT-AC1200G+ 3. RT-AC1300UHP I check this few quite okay spec. Maybe in the future when UniFi 10MB/100MB I can benefit from it. Edit: I just realized mine is older model. Not the DSL-N16, is the DSL-N12U Yes you can. My suggestion is to wait till unifi fully arrived at your area so that you can fully utilize the router's you've mentioned above. Refer to this thread.
Card PM	Report Top Like Quote Reply

NightFelix	Nov 16 2019, 03:38 PM Show posts by this member only \| Post #10633
Samsung Exynos All Stars 17,467 posts Joined: May 2008 From: Lazada	QUOTE(Jjuggler @ Nov 16 2019, 03:30 PM) Yes you can. My suggestion is to wait till unifi fully arrived at your area so that you can fully utilize the router's you've mentioned above. Refer to this thread. Thank you for spoonfeed link. You are so helpful.
Card PM	Report Top Like Quote Reply

Jjuggler	Nov 16 2019, 04:40 PM Show posts by this member only \| Post #10634
Narcissistic Genius Senior Member 1,341 posts Joined: Dec 2016	QUOTE(NightFelix @ Nov 16 2019, 03:38 PM) Thank you for spoonfeed link. You are so helpful. No problem my friend.
Card PM	Report Top Like Quote Reply

Aspick	Nov 16 2019, 10:12 PM Show posts by this member only \| Post #10635
Getting Started Junior Member 189 posts Joined: Jul 2018	QUOTE(tomastan4134 @ Nov 10 2019, 09:57 PM) i does asus rp-ac55 support aimesh? planning to get this to aimesh with my ac88u router Yes after you flashed with the latest firmware. I've an extra unit if you're interested pm me. This post has been edited by Aspick: Nov 16 2019, 10:13 PM
Card PM	Report Top Like Quote Reply

tomastan4134	Nov 17 2019, 02:30 PM Show posts by this member only \| Post #10636
Enthusiast Senior Member 830 posts Joined: Mar 2014	QUOTE(Aspick @ Nov 16 2019, 10:12 PM) Yes after you flashed with the latest firmware. I've an extra unit if you're interested pm me. please pm price.
Card PM	Report Top Like Quote Reply

blacktubi	Nov 17 2019, 08:08 PM Show posts by this member only \| Post #10637
- Elite 8,409 posts Joined: Jul 2008	ASUS actually made a video guide on how to update RP-AC55 to AiMesh. hs_HfDZeCqY
Card PM	Report Top Like Quote Reply

kennji	Nov 19 2019, 05:23 PM Show posts by this member only \| Post #10638
Casual Junior Member 381 posts Joined: Jun 2007 From: イチゴ軍団	I know it seems stupid, but I may want to reduce the TX power of my new RT-AC86U as my wife didn't like the idea of having too strong a coverage in the bedroom. Is the TX power adjustment under Wireless Professional tab the only way to do so? Something with Balance, Good, Performance to choose from. From the Wifi analyzer, the signal did seem to be lesser by changing the settings. If change the area to China will it lower the mW of the TX transmit power too?
Card PM	Report Top Like Quote Reply

SilentVampire	Nov 19 2019, 05:58 PM Show posts by this member only \| Post #10639
Networking Enthusiast Senior Member 5,714 posts Joined: Mar 2007	QUOTE(kennji @ Nov 19 2019, 05:23 PM) I know it seems stupid, but I may want to reduce the TX power of my new RT-AC86U as my wife didn't like the idea of having too strong a coverage in the bedroom. Is the TX power adjustment under Wireless Professional tab the only way to do so? Something with Balance, Good, Performance to choose from. From the Wifi analyzer, the signal did seem to be lesser by changing the settings. If change the area to China will it lower the mW of the TX transmit power too? Just lower it down, but for your info, it doesn’t matter. The transmit power from the WiFi is very low to have any effect. If I were you, I will tell your wife that it is lowered, and leave it as it is. She won’t feel any difference, and you can trust me on that.
Card PM	Report Top Like Quote Reply

blacktubi	Nov 19 2019, 08:33 PM Show posts by this member only \| Post #10640
- Elite 8,409 posts Joined: Jul 2008	Sneak peak of ASUS ZenWiFi AC (CT8) Mesh WiFi System (+) Plus points • Beautiful design • 3 LAN ports • AC3000 Tri-Band • AiProtection Antivirus and Parental Control (-) Negative Points • No fast roaming https://www.blacktubi.com/review/asus-zenwifi-ac-ct8/
Card PM	Report Top Like Quote Reply

« Next Oldest · Networks and Broadband · Next Newest »

826 Pages « < 530 531 532 533 534 > » Top

Add Reply Options

Change to:

0.1685sec

0.58

6 queries

GZIP Disabled
Time is now: 8th December 2025 - 07:54 PM

All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)

Removal Request

Powered by Invision Power Board © 2025 IPS, Inc.