Try updating ur laptop wifi adaptor

I am already on the latest firmware for both ac86u. Smart connect is off.

You should try using a USB wifi adapter to test and see if that is still happening. If it is, it could be a problem with interference or congestion on the 2.4GHz network in your area. If it is not, your laptop wifi adapter is the issue.

2.4Ghz, even if its working properly, can only get you 20-40Mbps.

You may want to fix the channel and bandwidth set to auto (instead of 40Mhz) , and try again.

If your old laptop is not HP or lenovo, just upgrade to dual band wifi card, costs less than RM$15, but a whole world of difference, 5Ghz N can get you > 80Mbps. Better latency too.

just updated my rt-ac1300uhp to the latest firmware. seems to make the router very unstable with the wireless broadcast. anybody facing the same issue?

Yes, I am suggesting you to downgrade to 45717.

https://www.blacktubi.com/guide/performance...or-asus-router/

Use this firmware from my site. I got it from ASUS.

I am currently running on RT-AC68U and upgraded my Unifi to 300mbps.

Can i know what's the recommended router to support aimesh at a thin / low budget? dont feel like spending another 700 bucks on RT-AC68u.

appreciate any recommendations.

Thanks

RP-AC55

Cheapest with AiMesh support

If you want better performance you can up your budget and get RT-AC66U B1

just updated mine recently and it seems to work fine, nothing out of the norm.

Just downgraded it to 45717. seems ok. Dont have disconnection problem ... for now. lol. Thanks btw.

Make sure to downgrade your main router and AiMesh node

81049 is unstable on AiMesh.

Yes i downgraded both and did reset factory settings. Seems better then the new version fimrware.

Hi guy,

is the below system log normal for my asus ac1300uhp after update to the latest firmware.

Oct 20 08:35:27 kernel: ath1: [24:ec:99:0e:42:72]station associated at aid 2: long preamble, short slot time, QoS, HT40 cap 0x111
Oct 20 08:35:53 kernel: ath0: [28:39:5e:39:0c:2d]station associated at aid 1: long preamble, short slot time, QoS, HT20 cap 0x411
Oct 20 08:36:00 kernel: ath1: [24:ec:99:0e:42:72]station with aid 2 leaves (refcnt 2)
Oct 20 08:36:05 kernel: ath1: [24:ec:99:0e:42:72]station associated at aid 2: long preamble, short slot time, QoS, HT40 cap 0x111
Oct 20 10:14:04 kernel: ath1: [24:ec:99:0e:42:72]station with aid 2 leaves (refcnt 4)
Oct 20 10:14:05 kernel: ath0: [28:39:5e:39:0c:2d]station with aid 1 leaves (refcnt 4)
Oct 20 10:24:38 kernel: ath1: [dc:37:14:4b:ce:a0]station with aid 3 leaves (refcnt 4)
Oct 20 13:29:35 kernel: ath1: [dc:37:14:4b:ce:a0]station associated at aid 2: long preamble, short slot time, QoS, HT40 cap 0x111
Oct 20 13:33:14 kernel: ath1: [24:ec:99:0e:42:72]station associated at aid 3: long preamble, short slot time, QoS, HT40 cap 0x111
Oct 20 13:33:37 kernel: ath0: [38:a2:8c:eb:04:e8]station associated at aid 1: long preamble, short slot time, QoS, HT20 cap 0x411
Oct 20 13:33:44 kernel: ath0: [28:39:5e:39:0c:2d]station associated at aid 2: long preamble, short slot time, QoS, HT20 cap 0x411

Hi squall_12,

The log shown are related to connection and disconnection of a client, this feature are shown on the log with the latest firmware.

It is to help in troubleshooting.

Thank you

so this is normal correct?

Hi squall_12,

Yes, it is normal.

Thank you.

ok thanks

Good day Asus Malaysia & all friendly LYN member

I've been using ASUS RT-AC68U for few months and it's been working perfectly. But just yesterday i noticed the LAN speed (connected to my PC) suddenly capped at 100mbps max.

*Fyi, i subscribed to UniFi 500mbps, and all the while i'm getting full speed (500mbps) on my PC with Ethernet connection.

Below are the things that i found :

1. At first i noticed my Ethernet Status speed is getting 100.0 Mbps, so i thought it's caused by the Speed & Duplex set to 100mbps capping. (it's configured with Auto Negotiation.)



2. I checked my Ethernet Ports status on Asus router configuration, all the LAN port are getting 100 Mbps (which i believe Speed & Duplex is not the root cause).

Is the status supposed to be like this? (I can't recall the speed on all port previously but i think it should be 1Gbps? Please correct me if i'm wrong)



3. Here's my router firmware version :



Few other troubleshooting steps I've done :

a. Change the Speed & Duplex from 100 mbps to 1.0 Gbps Full Duplex (not working)
b. Turn on Adaptive QoS and set the download speed to 500mbps (not working)
c. Turn on Jumbo Frame from LAN - Switch control (not working)
*All the things above I've never done before, my router and ethernet properties are in stock settings (I did not change anything previously).

Additional information :

a. I'm able to get the expected speed with WiFi 5ghz speed test on my phone (close to router).
b. 3 of my LAN port are connected to :
- LAN 1 > My PC (which should get 500mbps)
- LAN 2 > My another Asus Router (serve as an Access Point)
- LAN 3 > My CCTV DVR
- LAN 4 > Empty
c. All the cable are CAT6


Hope i posted in the right place. Any help and advice would be greatly appreciated !

Did you try replacing the LAN cable from the router to your PC?

Hi ASUS team

Recently I bought RT-N14UHP from my friend to replace my Maxis Home Fibre router. I did everything as instructed in the router set-up and config guide. I already reset the router. And I had logon to ASUS Router via 192.168.1.1 and key in my ISP account username and password.

After I have selected "Special Requirement from ISP" and click Next, there is a 5 seconds loading and sudden window prompt "asus-router says "connection timed out", I wonder what's the problem as previously I dont have any issue with my Maxis Fibre internet connection

Hope you can help me.