I suggest that you read the Fundamentals of Overclocking thread. Everything is in there. This place is for database discussions only.

Please read. Don't expect to be spoonfed all the time.

Updated

LBBLE 0522 FPBW

Idle temp - 41C-43C
Full load - 50C-53C
Vcore = 1.475V
Vdimm = 3.20V (512MB TWSP BH-5)
LDT = 3X
HTT - 303x9
Mobo - DFI LP UT NF4 SLI-D
HSF - AMD STOCK HSF

AMD64 3000+ Venice E6 LLBWE 0542FPCW @ 2600MHz 0.96v(Serial : 13801 -Staff Ver )
CoolerMaster Vortex Cooler
1GBkit UCCC with brainpower PC3200
Gigabyte K8N-SLi
BBA FireGL V3100 PCI-E x16 (525/550)
Maxtor 40GB 8MB - IDE1
Liteon DVDrom 16X - IDE2
Maxtor 80GB SATA - Sata3
Samsung Floppy Drive
Icute 450Watt DualRail 24pin Twin Fan
Window XP Pro SP2

This post has been edited by Cyclone87: Mar 11 2006, 05:58 PM


Attached thumbnail(s)

LLBWE ar.... not LBBWE? your voltage crazy summore.

what V you set in BIOS?

This post has been edited by soulfly: Mar 11 2006, 02:17 PM

Updated.I think this is the max for my stock cooler and i think i'm not going to raise the vcore anymore


LBBLE 0522 FPBW

Idle temp - 41C-45C
Full load - 50C-55C
Vcore = 1.5V
Vdimm = 3.20V (512MB TWSP BH-5)
LDT = 3X
HTT - 306x9
Mobo - DFI LP UT NF4 SLI-D
HSF - AMD STOCK HSF

It stock voltage..and it LBBWE..typo. Anyway..i already update latest bios..the reading stil the same.

What vcore you set in bios?
You mean you didn't touch the vcore settings in bios?

This post has been edited by kingmaker_20: Mar 11 2006, 08:07 PM

Yea..that is my first attempt booting with just increase in HTT,HTT ratio 3x and Divider333 and CnQ and spread spectum is Disable..anyway...more result tmr..Hoping 2.8ghz at least by tmr. I suspect the mobo read wrong reading..or the staff ver is abit abnormal.

Participating

Description:
Processor: AMD Opteron 146 (CABYE 0540FPMW) thx to dinster
Mobo: DFI Lanparty NF4 Ultra-D
Bios Set V: VID=1.45 with 110% special
Cooling: Air with Thermalright SI-120
Ram: Gskill FX
Psu: Hiper R 580W. thx to kingmaker_20
others at my siggy.

This post has been edited by kazama: Mar 15 2006, 03:57 PM

Oh,someone mention my nick
Ur welcome bro,nice clock you have there and the chip too.

Idle temp - 28C - 30C
Full load - 45C-48C
Vcore = 1.66V
Vdimm = 2.70V (2x512MB Corsair VS DDR400)
LDT = 3X
HTT - 289x9
Mobo - Jetway 939GT4-SLi-G-OC
HSF - TT Big Typhoon + Delta Tri-blade 120mm

Screenshot :

This post has been edited by magiara: Mar 23 2006, 02:30 PM

magiara, your cpu stepping?

LBBWE 0544FPCW

anyway, is my stepping good? i dunno anything about stepping..

Google your stepping code and u'll know how good it is.

you've already tested, why bother searching for more details?

help me google

wanna join lar...

CPU : AMD OPTERON 144 : CAB2E 0602GPAW
BIOS Set Vcore : 1.425V
BIOS Set Vdimm: 2.8 V
Mobo: DFI NF4 DAGF
Cooling : Watercooled (Swiftech MCW6002 + Nirox P2800 + Bulkhy Rad)
RAM : 2 x 512M KVR3200 DT-D43 : 2.5-4-3-8 (1CL) Dual Channel
The rest in my sig.

Wow, you are getting that results with only DAGF? It must be damn frightening experience tweaking that mobo. So, is that all the proc could do? or mobo is holding you down? Great result anyway.

Ppl, want to ask something on o/c on AMD64. I know this question been ask alot of time, but still need 2nd opinion again. As just got my new Opteron 144, still tweaking it.

Which is really prefer:
1. Max the core speed but using non 1:1 divider
2. Max the FSB running on 1:1 divider

Understand that in AMD64 o/c max on the HTT is more important then the max on FSB on the 1:1 divider. Correct me if you think that Im getting something wrong here...

Thanz for helping... (mod let me know if this is not a place to post this)

tenkiu, tenkiu... long time no see u.. still regard u as a living dictionary , I don't think had reached the proc limit yet.. still burnin in.

well DAGF wuz not that bad (considering I bought it 2nd hand from dinster)... I'd needed like 1.65V fer the chipset.. stock cooling really a let down..(use a 12cm 63cfm fan over the NF4) which ended up wif loads of error on the i/o and peripherals, annen the 400Watter Enlight Power Tank PSU .. ermmm... then those KVR DT's.. just couldn't cut above 247MHz... . aiyaaaa.. a lot of limitation.. neway my primary objective now is to get a high end result wif oni budget or low end parts.. (just look at the spec in my sig ). Yup have to rely on loads of tweaking and tuning... and mebbe some might consider it a waste of time, but hey this is what overclocking all about isn't it? Max perf with minimum moolah.