Welcome Guest ( Log In | Register )

14 Pages  1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

> AMD Socket-939 Overclocking Database, Athlon64, Athlon64 FX, Opteron

views
     
TSsoulfly
post Jan 20 2006, 05:41 PM, updated 14y ago

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



AMD Socket-939/AM2 Overclocking Database
for Athlon64, Athlon64 FX & Opteron



Rules and requirements:
1. Only 1 post each for one system.
2. One single screenshot of SP2004/Prime95, two CPU-Z (each showing CPU and RAM properties) is required.
3. CPU stepping is a must! Check for your CPU stepping on top of your processor. Also include informations such as BIOS set CPU voltage & cooling method.
4. Include other necessary informations such as motherboard type, memory configuration.
5. Only results with at least 8 hours prime stable will be accepted. Set your SP2004/Prime95 to run custom test with 8-512K in-place FFT (for CPU with 512KB L2 cache) or 8-1024K in-place FFT (for CPU with 1MB L2 cache) or BLEND test.
6. All of the requirements above are mandatory.


Tools:
SP2004 - http://sp2004.fre3.com/download.htm
CPU-Z - http://www.cpuid.com/cpuz.php

Lowyat.NET Socket-939 Results

CAB1E 0614 BPBW | [email protected] | 3204MHz | 1.595V | Opteron 144 E4 | WATER
CAB1E 0614 BPBW | OverCool | 3150MHz | 1.582V | Opteron 146 E4 | AIR
CAB1E 0614 BPMW | amok | 3109MHz | 1.400V| Opteron 144 E4| WATER
CAB2E 0540 FPMW | tAmp0i | 3000MHz | 1.508V | Opteron 146 E4 | AIR
CABYE 0540 FPAW | sup3rfly | 3000MHz | 1.550V | Opteron 146 E4 | AIR
CABYE 0540 FPMW | kazama | 3000MHz | 1.595V | Opteron 146 E4 | AIR
CAB2E 0602 GPAW | kiljim | 2987MHz | ?????V | Opteron 144 E4 | AIR
CAB1E 0614 BPMW | kingmaker_20 | 2970MHz | 1.370V | Opteron 144 E4 | WATER
CAB2E 0602 GPAW | amok | 2927MHz | 1.450V | Opteron 144 E4 | WATER
CACJE 0607 APAW | charge-n-go | 2808MHz | 1.456V | Opteron 144 E4 | AIR(fanless)
CAB2E 0610 GPAW | pcmoddingmy | 2808MHz | 1.488V | Opteron 144 E4 | Water cooled (passive rad)
LBBLE 0516 GPBW | hafifee | 2808MHz | 1.52V | Athlon64 3000+ E3 | AIR
????? 0522 ????? | KilJim | 2808MHz | 1.640V | Athlon64 3000+ E3 | AIR
xxxxx xxxx xxxx | mazdagtr210 | 2804MHz | 1.475V | Athlon64 3000+ E3 | WATER
LBBLE 0520 FPMW | gsan | 2800MHz | 1.520V | Athlon64 3200+ E3 | AIR
xxxxx xxxx xxxx | jslut | 2800MHz | 1.570V | Athlon64 3700+ E4 | AIR
LBBLE 0522 FPBW | kingmaker_20 | 2754MHz | 1.500V | Athlon64 3000+ E3 | AIR
LBBWE 0542 GPAW | o23ff | 2754MHz | 1.700V | Athlon64 3000+ E6 | WATER
LBBLE 0520 FPMW | dinster | 2714MHz | 1.472V | Athlon64 3200+ E3 | AIR
xxxxx xxxx xxxx | Cyclone87 | 2711MHz | 1.725V | Athlon64 Engineering Sample E4 | AIR
LBBWE 0542 EPHW | cktee83 | 2706MHz | 1.600V | Athlon64 3000+ E6 | AIR
xxxxx xxxx xxxx | ethanlow | 2700MHz | 1.450V | Athlon64 3000+ E3 | AIR
LBBWE 0607 FPBW | nakata101 | 2700MHz | 1.500V | Athlon64 3200+ E6 | AIR
xxxxx 0516 DPJW | ah_chak | 2700MHz | 1.600V | Athlon64 3000+ E3 | AIR
LBBLE 0516 CPBW | ahpaul82 | 2700MHz | 1.650V | Athlon64 3000+ E3 | AIR
NBBWE 0618 FAB | lolhalol | 2700MHz | 1.680V | Athlon64 3000+ E6 | AIR
XXXXX 0530 CPDW | siawgu | 2700MHz | 1.680V | Athlon64 3000+ E6 | WATER
CDBHE 0550 TPWM | rendl | 2651MHz | 1.412V | Athlon64 3200+ E4 | AIR
LBBWE 0540 DPIW | newbieockids | 2662MHz | 1.568V | Athlon64 3000+ E6 | AIR
LBBLE 0516 GPBW | ah_khoo | 2655MHz | 1.430V | Athlon64 3000+ E3 | AIR
LBBWE 0543 BPEW | kanethesun | 2617MHz | 1.575V | Athlon64 3000+ E6 | AIR
LBBWE 0603 APBW | kev da man | 2615MHz | 1.500V | Athlon64 3000+ E6 | AIR
LBBWE 0544 FPCW | magiara | 2608MHz | 1.632V | Athlon64 3000+ E6 | AIR
LBBWE 0614 BPMW | jsnkok | 2602MHz | 1.475V | Athlon64 3000+ E6 | AIR
LBBWE 0542 FPCW | Cyclone87 | 2601MHz | 1.400V | Athlon64 3000+ E6 | AIR
LBBLE 0520 xxxx | winc87 | 2502MHz | 1.420V | Athlon64 3000+ E6 | AIR
XXXXX 0516 FPAW | Westley | 2500MHz | 1.475V | Athlon64 3200+ E3 | AIR

This post has been edited by soulfly: Jan 7 2008, 12:01 AM
winc87
post Jan 21 2006, 11:37 AM

w|Nc
******
Senior Member
1,621 posts

Joined: Jan 2003
From: Seremban



user posted image
TSsoulfly
post Jan 21 2006, 06:25 PM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



bro.... stepping & cooling?
winc87
post Jan 21 2006, 07:10 PM

w|Nc
******
Senior Member
1,621 posts

Joined: Jan 2003
From: Seremban



Oppsss....forgot the stepping.....i will check it in these days....i use air cooling xp 120 with a 12cm fan on it. smile.gif
siawgu
post Jan 21 2006, 08:16 PM

Enthusiast
*****
Senior Member
993 posts

Joined: Jan 2003
From: Kuching, Sarawak



========================================
Short description:
cpu: 300x9 @ 2700Mhz, 1.68
ram: DDR450, CL2.5-4-3-8-1T @ 2.9V
========================================
AMD Athlon 64 3000+ 0530CPDW Rev. E6
DFI LANParty UT Ultra-D Mod'ed to SLI (6/23 BIOS)
2x256MB Kingston Value RAM DDR PC-3200 (BT-D43)
Leadtek Winfast 6600GT 128MB DDR3
40GB Western Digital ATA HDD + 20GB Maxtor ATA HDD
TDK CDRW & Lite-On DVD Writer
Cooler Master 450W PSU
Thermaltake BigWater


user posted image
SP2004 primed for 24 Hours ++
winc87
post Jan 22 2006, 02:58 AM

w|Nc
******
Senior Member
1,621 posts

Joined: Jan 2003
From: Seremban



My cpu's stepping is LBBLE 0520. The alphabets behind the week i forgot. smile.gif
Cyclone87
post Jan 22 2006, 08:24 AM

Regular
******
Senior Member
1,254 posts

Joined: Jan 2003
From: Penang




Short description:
cpu: 200x13.5 @ 2700Mhz, 1.725v
ram: [email protected] 6-3-3-2.5 ,2.6v

My CpuZ

========================================
AMD Athlon 64 ES ( Venice E4 core) Sry..no Stepping
DFI NF4 Infinity
1xSamsung TCCC + 1x Mircon -5B G (512x2)
Gecube X300/550 128bit 128mb
80GB Maxtor 7200Rpm 8mb Buffer
Xp90 + Delta 5v 92mm Fan
And ICute 450watt 24pin laugh.gif

user posted image


This post has been edited by Cyclone87: Jan 22 2006, 02:23 PM
PowerHouse
post Jan 22 2006, 11:57 PM

Getting Started
**
Junior Member
237 posts

Joined: Nov 2005
From: Kuching...


[quote=Cyclone87,Jan 22 2006, 08:24 AM]
Short description:
cpu: 200x13.5 @ 2700Mhz, 1.725v
ram: [email protected] 6-3-3-2.5 ,2.6v

My CpuZ

========================================
AMD Athlon 64 ES ( Venice E4 core) Sry..no Stepping
DFI NF4 Infinity
1xSamsung TCCC + 1x Mircon -5B G (512x2)
Gecube X300/550 128bit 128mb
80GB Maxtor 7200Rpm 8mb Buffer
Xp90 + Delta 5v 92mm Fan
And ICute 450watt 24pin laugh.gif

by the way, may i ask, what is ur cpu cpec? is it 3200 or 3000.tq
TSsoulfly
post Jan 23 2006, 02:25 PM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



Cyclone87... no stepping meh?

Anyway.... try use CPU-Z 1.31
apengfx-
post Jan 23 2006, 04:28 PM

I'm a Master Trader.
******
Senior Member
1,553 posts

Joined: Jan 2003
From: Sniper Island is in your heart :)



mau tanya...
ES...new kah?
apa yg spesial?
Cyclone87
post Jan 23 2006, 07:28 PM

Regular
******
Senior Member
1,254 posts

Joined: Jan 2003
From: Penang




QUOTE(soulfly @ Jan 23 2006, 02:25 PM)
Cyclone87... no stepping meh?

Anyway.... try use CPU-Z 1.31
*
ES...have no stepping on the processor itself. No stepping or even a simple word like assemble in malaysia. It a plain chip.

And...CpuZ 1.31..dont give me anything special on core and revision. Even CPUid..dont even have the assemble date. Only got clockspeed and multiplier.

QUOTE
by the way, may i ask, what is ur cpu cpec? is it 3200 or 3000.tq


It 3200+. San Diego with Half L2 cache or the new code is Venice E4.


TSsoulfly
post Jan 23 2006, 08:53 PM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



oh ya... suddenly remembered that ES cpu don't have anything on the heatspreader
sup3rfly
post Jan 23 2006, 10:29 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


Here is mine...i have posted this in the Stable O/C Database...i dunno does this consider as repost...if it is kindly remove it plz.... the stepping of the proc is CABYE 0540 FPAW

user posted image

CPU : AMD Opteron 146 (3.0GHz @ 10x300MHz, 1.45 x 110% = 1.550V)
Core : San Diego
Socket : S939
RAM : 2 x 512MB Patriot PDP Systems PC4200 (DDR500, 2.5-3-3-5, 2.90V)
M/B : DFI nF4 LanParty Ultra-D (300HTT, 3xLDT, 1.50V)
PSU : Antec TPII-480w
Cooling : Thermalright SI-120C + NMB 120mm High Speed Fan (Modded by AllnGap)

This post has been edited by sup3rfly: Jan 23 2006, 10:49 PM
TSsoulfly
post Jan 24 2006, 10:53 AM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



no problem, this thread is different one biggrin.gif

very good result anyway thumbup.gif
sup3rfly
post Jan 24 2006, 11:49 AM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


QUOTE(soulfly @ Jan 24 2006, 10:53 AM)
no problem, this thread is different one biggrin.gif

very good result anyway thumbup.gif
*
thx tongue.gif

still learning >.<"
apengfx-
post Jan 25 2006, 11:09 PM

I'm a Master Trader.
******
Senior Member
1,553 posts

Joined: Jan 2003
From: Sniper Island is in your heart :)



QUOTE(sup3rfly @ Jan 23 2006, 10:29 PM)
Here is mine...i have posted this in the Stable O/C Database...i dunno does this consider as repost...if it is kindly remove it plz.... the stepping of the proc is CABYE 0540 FPAW

user posted image

CPU : AMD Opteron 146 (3.0GHz @ 10x300MHz, 1.45 x 110% = 1.550V)
Core : San Diego
Socket : S939
RAM : 2 x 512MB Patriot PDP Systems PC4200 (DDR500, 2.5-3-3-5, 2.90V)
M/B : DFI nF4 LanParty Ultra-D (300HTT, 3xLDT, 1.50V)
PSU : Antec TPII-480w
Cooling : Thermalright SI-120C + NMB 120mm High Speed Fan (Modded by AllnGap)
*
wow..terbaik la..boleh tolak lagi nie thumbup.gif
sup3rfly
post Jan 26 2006, 12:07 AM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


tongue.gif thx thx....i dun think it still can push futher... i get errors in 3.1 ghz =\
let me try with my fortron when its arrive ^^
gsan
post Jan 27 2006, 12:08 AM

Electrical RF Engineer
*******
Senior Member
2,468 posts

Joined: Jan 2003

come on guy, let's bring lowyat database up.

AMD Athlon 64 3200+ LBBLE 0520 FPMW (same as dinster's one smile.gif )
DFI LANParty UT Ultra-D (704-2BTA BIOS)
Gskill 2x512MB GH Winbond UnTesTed
64MB Leadtek Winfast 6200TC 64bit
Acbel iPower 450W PSU
Thermalright xp90c with 92mm @ 2.2k rpm

user posted image

this proc can do 2.8GHz stable with 1.536v before but somehow now become unstable and only stable @ 1.568v. anyone know what's the problem?

This post has been edited by gsan: Jan 27 2006, 08:15 AM
KilJim
post Jan 27 2006, 12:49 AM

^-_-^ ZzzZzZzZzzz....
Group Icon
Elite
4,405 posts

Joined: Jan 2003
From: Singapore



will post a proper one later on
bleh, Optys cheating wan tongue.gif
sup3rfly
post Jan 27 2006, 06:39 AM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


QUOTE(KilJim @ Jan 27 2006, 12:49 AM)
will post a proper one later on
bleh, Optys cheating wan  tongue.gif
*
cry.gif
where got cheat wo...

14 Pages  1 2 3 > » Top
 

Change to:
| Lo-Fi Version
0.0311sec    0.29    6 queries    GZIP Disabled
Time is now: 17th June 2021 - 04:44 AM