bad to bad if upgrading from my m5g
btw the Thunder FX is good? Kevin u bought m5f bundle Thunder FX or not?
Ivy Bridge Overclocking V1 | 3770K/3570K | Z77, Torture Your CPU, Post It Here!
|
|
 Jul 12 2012, 10:24 PM
|
 
Senior Member
1,198 posts Joined: Nov 2008 From: ~~BacK FroM HelL~~ Status: R.I.P 
|
i damn jelly with m5f
bad to bad if upgrading from my m5g btw the Thunder FX is good? Kevin u bought m5f bundle Thunder FX or not? |
Quote|
|
|
|
|
Jul 12 2012, 11:08 PM
|
 
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan  
|
QUOTE(trisx @ Jul 12 2012, 10:24 PM) i damn jelly with m5f Basically both MVG and MVF perform very wellbad to bad if upgrading from my m5g btw the Thunder FX is good? Kevin u bought m5f bundle Thunder FX or not?  Can't see what's the difference in terms of normal OCbility unless if you're playing extreme cooling in which MVF can take more MORE voltage. I personally think that MVG is a brilliant little monster that you won't be missing anything on this board. Gene = Small form factor Formula = everything you will ever need Extreme = as above but more features & accessories that are extra for you My Formula doesn't come with the TFX, as I don't really need a sound for a 100% benching rig.  |
|
|
Jul 13 2012, 06:36 PM
|
|
Senior Member
1,198 posts Joined: Nov 2008 From: ~~BacK FroM HelL~~ Status: R.I.P
|
Yup totally agree with u. For mild OC and gaming MVG is just great
 Just lurking around reviewson TFX, seems it is not performing as good as Asus Essence series? Found out the new sound card from asus. Asus Phoebus. Seems gooding  This post has been edited by trisx: Jul 13 2012, 06:36 PM |
|
|
Jul 13 2012, 07:33 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(trisx @ Jul 13 2012, 06:36 PM) Yup totally agree with u. For mild OC and gaming MVG is just great I will let audiophiles to comment on the sound quality of TFX vs Essense. Just lurking around reviewson TFX, seems it is not performing as good as Asus Essence series? Found out the new sound card from asus. Asus Phoebus. Seems gooding it all depends on your ears and if you can hear the difference. |
|
|
Jul 13 2012, 10:28 PM
|
Junior Member
72 posts Joined: May 2011 From: Negeri Sembilan
|
Good evening fellow OC'ers ... I'm newbie in overclocking. Just want to share my 1st overclocking attempt on air
 Ambient temp of 33.5 C in room w/o air cond. Specs on my sig» Click to show Spoiler - click again to hide... « Also, want to ask one question. Is 40 C a normal idle temp (for air cooling) on 33.5 C ambient temp w/o aircond? I googled idle temp on good air cooling is around 30 (ambient temp of 25 C) on most forum... I'm using thermalright archon heatsink with a TY-140 fan and Gentle Typhoon AP-15 (temporary fan before another TY-140 arrived) in push-pull config. Hope any1 can give an insight on this. Looking forward to see my name on the 1st page  This post has been edited by ZaiNor-DI255: Jul 23 2012, 07:47 AM |
|
|
Jul 14 2012, 12:24 AM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(ZaiNor-DI255 @ Jul 13 2012, 10:28 PM) Good evening fellow OC'ers ... I'm newbie in overclocking. Just want to share my 1st overclocking attempt on air The core temps is normal, considering your ambient temp is that high. Ambient temp of 33.5 C in room w/o air cond. Specs on my sigAlso, want to ask one question. Is 40 C a normal idle temp (for air cooling) on 33.5 C ambient temp w/o aircond? I googled idle temp on good air cooling is around 30 (ambient temp of 25 C) on most forum... I'm using thermalright archon heatsink with a TY-140 fan and Gentle Typhoon AP-15 (temporary fan before another TY-140 arrived) in push-pull config. Hope any1 can give an insight on this. Looking forward to see my name on the 1st page Did you try any lower vcore? Welcome to the club! |
|
|
|
|
|
Jul 14 2012, 01:24 AM
|
|
Senior Member
1,198 posts Joined: Nov 2008 From: ~~BacK FroM HelL~~ Status: R.I.P
|
Nice volt u got there.
My 1.27v @ 4.5Ghz always fail to stress 12 hour prime95 + AVX |
|
|
Jul 14 2012, 07:01 AM
|
|
Junior Member
72 posts Joined: May 2011 From: Negeri Sembilan
|
Did try 1.265V... BSOD 0x101
 Ok then. Before considering a water cooler, must installed air cond 1st in room Added on July 14, 2012, 7:04 am QUOTE(trisx @ Jul 14 2012, 01:24 AM) Nice volt u got there. Lucky me then. I guess... My 1.27v @ 4.5Ghz always fail to stress 12 hour prime95 + AVX This post has been edited by ZaiNor-DI255: Jul 14 2012, 07:04 AM |
|
|
Jul 14 2012, 01:07 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(ZaiNor-DI255 @ Jul 14 2012, 07:01 AM) Did try 1.265V... BSOD 0x101 ok, i think that's the best vcore for your chip. Ok then. Before considering a water cooler, must installed air cond 1st in room Added on July 14, 2012, 7:04 am Lucky me then. I guess... Good enough for daily usage. |
|
|
Jul 14 2012, 01:09 PM
|
|
Junior Member
72 posts Joined: May 2011 From: Negeri Sembilan
|
thank you very much
 |
|
|
Jul 14 2012, 01:13 PM
|
Senior Member
1,301 posts Joined: Feb 2010 From: FSN9 CenTToll
|
try OC my i5-3570K with 4.5GHz offset +0.010V (Vcore=1.208-1.216v)
be4 got BSOD with x1A error which is not sufficient dram voltage... after lurking around find out my ram running 1.585v in default/auto in BIOS/UEFI then i set up dram voltage=1.585v everything goes fine untill 1 hour++ prime95 got fatal error in prime...but none BSOD occurs..just 1 core stop working....anybody? Added on July 14, 2012, 1:16 pmafter stable enuf i'll post my screen shot This post has been edited by huzzLEE_82: Jul 14 2012, 01:16 PM |
|
|
Jul 14 2012, 01:34 PM
|
|
Senior Member
1,198 posts Joined: Nov 2008 From: ~~BacK FroM HelL~~ Status: R.I.P
|
HuzzLEE try increase ur Vcore and run it again
1.2 is quite low for 4.5ghz unless u got a nice chip |
|
|
Jul 14 2012, 01:42 PM
|
|
Senior Member
1,301 posts Joined: Feb 2010 From: FSN9 CenTToll
|
QUOTE(trisx @ Jul 14 2012, 01:34 PM) HuzzLEE try increase ur Vcore and run it again i think so... acting like i own a golden chip la plak...1.2 is quite low for 4.5ghz unless u got a nice chip i'll bump +0.015v now.... 1 thing is it ok 1.5 ram running 1.585v? stated here scroll down by lingloong this 1333MHz ram easily run 1600MHz,but may b possible with 1.585v later i'll test after cpu stable... |
|
|
|
|
|
Jul 14 2012, 01:58 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(huzzLEE_82 @ Jul 14 2012, 01:42 PM) i think so... acting like i own a golden chip la plak... As you could overvolt CPU so does the dram right? i'll bump +0.015v now.... 1 thing is it ok 1.5 ram running 1.585v? stated here scroll down by lingloong this 1333MHz ram easily run 1600MHz,but may b possible with 1.585v later i'll test after cpu stable... Just give it a bump dram can take high vdimm w/o dying or degrading. |
|
|
Jul 14 2012, 02:15 PM
|
|
Senior Member
1,198 posts Joined: Nov 2008 From: ~~BacK FroM HelL~~ Status: R.I.P
|
QUOTE(owikh84 @ Jul 14 2012, 01:58 PM) As you could overvolt CPU so does the dram right? Yup, u can even get it run on 1.6v Just give it a bump dram can take high vdimm w/o dying or degrading. No probs with the vdimm This post has been edited by trisx: Jul 14 2012, 02:16 PM |
|
|
Jul 14 2012, 02:28 PM
|
|
Senior Member
1,301 posts Joined: Feb 2010 From: FSN9 CenTToll
|
QUOTE(trisx @ Jul 14 2012, 02:15 PM) Yup, u can even get it run on 1.6v glad to hear that.. No probs with the vdimm u foresee my next question..hahaha wats the point having it stated 1.5V while it works over tat btw....hehe |
|
|
Jul 14 2012, 02:51 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(huzzLEE_82 @ Jul 14 2012, 02:28 PM) glad to hear that.. because it is tested stable with 1.5v at rated speed/timing so they label it as 1.5v.u foresee my next question..hahaha wats the point having it stated 1.5V while it works over tat btw....hehe don't be surprise to see a 1600, 1866 or 2133 etc Vengeance having the same ICs as your 1333 kit but they're labeled @ 1.6v & 1.65v |
|
|
Jul 14 2012, 03:02 PM
|
|
Senior Member
1,301 posts Joined: Feb 2010 From: FSN9 CenTToll
|
ok after ~1hour+ blend test of prime95
here's the screenshot of CPU-Z,prime95,real temps,AiDA64 temp readings » Click to show Spoiler - click again to hide... « btw all temps readings varies..so which one the most accurate? my references webpage for OC obtained here: (coz here mostly Asus users,me budget user only  )Ivy Bridge complete OC guide ASRock Edition ASrock Z77 discussion club btw owikh last nite whenever i set my dram voltage to 1.5v with default timing 9-9-9 24 1N BSOD occurs in my board it considers undervolt (with sufficient voltage) coz by default it runs 1.585v i run memtest86 last nite for 2hours45minutes++ and confirm none of the stick have errors....  (waiting memtest finish i can sleep for a while hhahaha)Added on July 14, 2012, 3:07 pm QUOTE(owikh84 @ Jul 14 2012, 02:51 PM) because it is tested stable with 1.5v at rated speed/timing so they label it as 1.5v. means if dare enuf can try OC ram rite..but on own risk... don't be surprise to see a 1600, 1866 or 2133 etc Vengeance having the same ICs as your 1333 kit but they're labeled @ 1.6v & 1.65v  i'll try 1600MHz later,1866 afraid fry my ram btw owikh count me in....here my cpu-z screen » Click to show Spoiler - click again to hide... « This post has been edited by huzzLEE_82: Jul 14 2012, 03:10 PM |
|
|
Jul 14 2012, 03:15 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(huzzLEE_82 @ Jul 14 2012, 01:13 PM) be4 got BSOD with x1A error which is not sufficient dram voltage... QUOTE(huzzLEE_82 @ Jul 14 2012, 03:02 PM) ok after ~1hour+ blend test of prime95 I don't know from where did you get the BSOD description = insufficient vdimm? Can't seem to find x1A code in the BSOD list. here's the screenshot of CPU-Z,prime95,real temps,AiDA64 temp readings 
btw all temps readings varies..so which one the most accurate? my references webpage for OC obtained here: (coz here mostly Asus users,me budget user only )Ivy Bridge complete OC guide ASRock Edition ASrock Z77 discussion club btw owikh last nite whenever i set my dram voltage to 1.5v with default timing 9-9-9 24 1N BSOD occurs in my board it considers undervolt (with sufficient voltage) coz by default it runs 1.585v i run memtest86 last nite for 2hours45minutes++ and confirm none of the stick have errors.... (waiting memtest finish i can sleep for a while hhahaha)Added on July 14, 2012, 3:07 pm means if dare enuf can try OC ram rite..but on own risk... i'll try 1600MHz later,1866 afraid fry my ram  » Click to show Spoiler - click again to hide... « as for the temp sensor soft I'd trust more on RealTemp. Look at your HWMon shows 127C on the other spots which is not supposed to look like that. |
|
|
Jul 14 2012, 03:24 PM
|
|
Senior Member
1,301 posts Joined: Feb 2010 From: FSN9 CenTToll
|
erm from here bro;
http://www.overclock.net/t/1198504/sandy-i...-asrock-edition click on HELP ME then BSOD LIST 1st upper column quote from overclocker23578 bottom column is urs... dunno can rely on this BSOD list or not aiyak my bad this code under sandy bridge...erm how a? This post has been edited by huzzLEE_82: Jul 14 2012, 03:30 PM |
|
Topic ClosedOptions
|
| Change to: |  0.0296sec
 0.48
 6 queries
 GZIP Disabled
Time is now: 5th December 2025 - 05:12 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.