Ya i know, but he said his rams are "naked". So i made some comparison here.

hmm... serious i never ocing since amd barton so hor, i buta buta hamtam nia... btw those is OEM ram... no brand 1.

okok... printscreen OTW

Elpida PC3-8500




SuperPi 32mb 100x50 @ 1.48v


This post has been edited by kelvin_hata: May 22 2012, 01:55 AM

Team Xtreem 2600C10 @ 2666 10-12-12-25-1T


This post has been edited by owikh84: May 22 2012, 07:08 AM

Cap Ayam Brand 1066 @ 1800 9-9-9-24 1T

Well done bro. Basically you could OC any RAM with IB due to strong IMC integrated on die.

I still cant break 6m30s barrier at 5.0GHz.
Wazza checked
TinyXP 32/64bit checked
Large Sys Cache checked
Priority & Core affinity checked
Silver theme checked

Maxmem pending
Tighter TRFC pending
Lower LB pending

Oh? Last time used AMD, 1600 to 1700 quite difficult already.
So by the way, if i want to make my Vengeance 1600c9 1.5v to 2000c9, what is the require voltage do you guys think?

1.55 or 1.6v

If it's a good kit you should be able to push it to 2000 9-10-9-24-1T @ 1.65v

Google for Vengeance 1600 to 2000 to find out more details

ram oc on amd mite not be as good as intel but to do 2200MHz & below (on FX or thuban) is not that difficult provided u have good sticks. vengeance red 1600 cl9 was mediocre at its best (tested with FX). 1333 @ 7-7-7, 1600 @ 9-9-9, u gotta go looser than that if u wanna hit pass 1600MHz. I believe it'd be d same on IB.

p/s: to be fair, vengeance red 1600 cl9 is cheap thou, so can't really complain much.

This post has been edited by ah_khoo: May 22 2012, 06:17 PM

I wonder why when i oc my ram and set the voltage to 1.65v, every time i shut down, my system turn on again. when i use 1.5v or1.8v, no problem. Oh yeah my ram could only hit cl7 @ 1333mhz. but i will test it on my amd system, see how low it can go. my asus c4f just back from rma & asus swap it new.

wah.. i using only 1.55v nia.

[quote=kelvin_hata,May 22 2012, 08:42 AM]
Cap Ayam Brand 1066 @ 1800 9-9-9-24 1T
really impressive

X boleh la, tried OC my ram, not stable no matter how i tweak, maybe i need to do more researches first hehe.
So far my processor is stable only at 4.6Ghz @ 1.395 LLC 100% @89c temp.
Cinnebench 7.43pts

This post has been edited by JeffreyYap: May 23 2012, 07:51 PM

1.395v stable? I need to set mine to 1.42v for a stable 4.6Ghz.

I tot yours 4.7 @ 1.425? Actually keep on crashing since 1.390, now 1.405 seems ok, will update u.

---

Added on May 23, 2012, 11:57 pm owikh84 ,
internal PLL voltage disable or enable?
Spread spectrum: Disabled
Intel speedstep: enable or disable?
For 4.6Ghz

I googled, usually people can get 1.3- 1.35 24hours stable for 3570k, wonder mine why need 1.405 .

This post has been edited by JeffreyYap: May 24 2012, 12:19 AM

It is normal. I need 1.4v to run 4.6GHz. Completely stable.

Generally, there are three reasons why they can run 4.6GHz at lower voltage,
1) They have lower room temperature
2) They use better cooler (i.e. water cooling)
3) They have a good chip

I think 4.7Ghz is other member, not me. Just had a BSOD x101 just now. Had to increase my Vcore to 1.45v.

---

Added on May 24, 2012, 7:36 amGood cpu chip? or motherboard chip?

This post has been edited by spdboyz: May 24 2012, 07:36 AM

my first run, voltage auto, prolimatech megahalems push-pull with cheapo cm 90cfm fans.

But H100 conside a good water cooling also .
So Internal PLL voltage enable or disable?

enable