Is there any BIG different for 16+8(Asrock fatality z77) and 8+4(Asrock Extreme 4 z77)? Both can OC perfectly right.
Ivy Bridge Overclocking V1 | 3770K/3570K | Z77, Torture Your CPU, Post It Here!
Ivy Bridge Overclocking V1 | 3770K/3570K | Z77, Torture Your CPU, Post It Here!
|
|
Apr 24 2012, 09:42 AM
Return to original view | Post
#1
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
Is there any BIG different for 16+8(Asrock fatality z77) and 8+4(Asrock Extreme 4 z77)? Both can OC perfectly right.
|
|
|
|
|
|
Apr 28 2012, 02:37 PM
Return to original view | Post
#2
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
Will Intel redefine/revision current thermal interface? Maybe second batch? Hmm
This post has been edited by JeffreyYap: Apr 28 2012, 02:46 PM |
|
|
Apr 29 2012, 11:56 AM
Return to original view | Post
#3
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(kelvin_hata @ Apr 29 2012, 12:59 AM) 5.2Ghz at 61C? |
|
|
Apr 29 2012, 05:36 PM
Return to original view | Post
#4
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(owikh84 @ Apr 29 2012, 04:07 PM) What could that be? The link below blows away the possibility of bad contact & TIM paste rumours. So sad.. but i guess i still will go for ivy bridge because for the PCIE 3.0 only.. for future cards.i7-3770k tested with IHS removed. Results? |
|
|
Apr 29 2012, 11:18 PM
Return to original view | Post
#5
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(owikh84 @ Apr 29 2012, 10:19 PM) make sure to grab the 3770K + watercooling for better OC. Using dual ADDA fans(171CFM) on H100, not yet buy processor yet, still deciding which to go as i more on gaming only, maybe i5 3570K is hard to get 5GHz unless you're the among the luckiest guys Added on April 29, 2012, 11:18 pmowikh84, faster buy the i7 and overclock This post has been edited by JeffreyYap: Apr 29 2012, 11:18 PM |
|
|
May 3 2012, 09:35 AM
Return to original view | Post
#6
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
|
|
|
|
|
|
May 6 2012, 09:55 AM
Return to original view | Post
#7
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
|
|
|
May 7 2012, 09:46 AM
Return to original view | Post
#8
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
|
|
|
May 7 2012, 12:41 PM
Return to original view | Post
#9
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(owikh84 @ May 7 2012, 10:53 AM) unfortunate my 3770K shipment has been delayed. Latest ETA should be today. Well let's have a pop corn while waiting lol. Another stuff i'm waiting is Asus 680 DCU2 TOP as well as the yet-to-be-released Maximus V Formula. Woot, your condition exactly the same as mine, too bad my GTX680DC2T and 3770k only can get around 17th May This post has been edited by JeffreyYap: May 7 2012, 12:42 PM |
|
|
May 12 2012, 07:43 PM
Return to original view | Post
#10
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
|
|
|
May 15 2012, 08:49 AM
Return to original view | Post
#11
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
Bought myself a 3570k yesterday, searched the whole bulding in Digital Mall, all no stock for 3770k, dafuq.
Using H100(ADDA Fans), temperature is STOCK: idle: 38c, max load: 65c. Added on May 15, 2012, 8:49 amWill try and overclock later. This post has been edited by JeffreyYap: May 15 2012, 08:49 AM |
|
|
May 15 2012, 03:46 PM
Return to original view | Post
#12
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
3570k OC to 4.2 without voltage tweak. Can go higher, but i'm satisfy now since no need to tweak voltage. The fans on H100 running 50%
![]() This post has been edited by JeffreyYap: May 15 2012, 04:13 PM |
|
|
May 15 2012, 06:38 PM
Return to original view | Post
#13
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(ALeUNe @ May 15 2012, 06:29 PM) I don't want to spend money on expensive board. I use it for HTPC. It delivers more than enough power for my HTPC applications. Asrock z77 extreme 4 doing very good. Nice looking also.If I were to change the mobo, I'd rather sell my i5-3570K and get i7-3770K (heard it can run 4.8GHz at default voltage) |
|
|
|
|
|
May 15 2012, 07:52 PM
Return to original view | Post
#14
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(ketapang @ May 15 2012, 07:16 PM) Yes, very good board. Im not planning to OC much, but stock setting my temperature is 68c with H100's fan @ 50% spin OC to 4.2(First attempt straight away success) no need to tweak voltage(around 1.168v) and my temperature just 73c with h100's fan @ 50% spin only, My room is so hot because sun direct from my window, imagine aircond room, i think my temperature 60c only This post has been edited by JeffreyYap: May 15 2012, 07:53 PM |
|
|
May 16 2012, 10:10 AM
Return to original view | Post
#15
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(whatsayyou @ May 16 2012, 12:53 AM) Hi, i also got extreme 4. just set everything up today. but as my pc doesnt have a dvd drive, i have to download from the website. Refer to page 13, post 259, i posted my screenshot regarding my OC result.I hope i didnt miss out any drivers, but device manager shows 2 unknown devices. could be the IGP/virtu thing? anyway hope u can share your settings for oc. Hmm DVD drive is a hardware, not a software, what you mean can download from the website? Not sure about the unknown devices, mine working fine. Added on May 16, 2012, 10:12 am QUOTE(ketapang @ May 16 2012, 12:20 AM) wah i nid to get rid my mobo asap. Thinner and the width also shorter, careful if you put the rams, coz it will bend inward btw i read from vortez review saying the mobo is thinner than usual atx mobo. i think if im not mistaken 3cm thinner. i scared the mobo bent if i use big cooler. This post has been edited by JeffreyYap: May 16 2012, 10:12 AM |
|
|
May 16 2012, 06:45 PM
Return to original view | Post
#16
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(whatsayyou @ May 16 2012, 10:27 AM) when i took the mobo out from the box, it looked a bit bent to me already. then when i installed the CM evo 212, it looked even more bent. Maybe the postman bend it! very scared,esp when plugging in the atx connector. that side totally flexes when i plug it in!!! Added on May 16, 2012, 10:29 am i meant uefi settings. cpu voltage, offset, etc etc I understand about the atx connector, because no screws to secure there |
|
|
May 18 2012, 07:54 PM
Return to original view | Post
#17
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
|
|
|
May 19 2012, 06:12 PM
Return to original view | Post
#18
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
My Bios set 1.365, but CPU-Z show 1.248.
So far 4.5Ghz @1.248(CPU-Z) stable @ 80c with H100 |
|
|
May 19 2012, 07:00 PM
Return to original view | Post
#19
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
QUOTE(owikh84 @ May 19 2012, 06:37 PM) What you mean? EDITED: Just googled it, well, so what i'm going to do now is lower the vcore in bios and set the LLC to maximum right? This post has been edited by JeffreyYap: May 19 2012, 07:26 PM |
|
|
May 20 2012, 12:25 PM
Return to original view | Post
#20
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,232 posts Joined: Jun 2008 From: ¯\(º_o)/¯ |
|
|
Topic ClosedOptions
|
| Change to: | 0.0617sec
0.83
7 queries
GZIP Disabled
Time is now: 4th December 2025 - 03:15 AM |