Im thinking to get 3570k. What is idle and load temp with stock cooler?
This is alot better than 2500k rite? Im using amd 555be before.

Yup its a better choice . You need to pair 3570k with a good cooler though, i'm using hyper 212 evo & idle temp (4.3Ghz) around 41c~45c. Load was at 86c on highest core. Tested with 7-hours of prime95. no idea on stock cooler, once buy this proc str8 use custom cooler.

---

Added on May 14, 2012, 6:40 pmi give it a try tonight.

This post has been edited by ketapang: May 14 2012, 06:40 PM

@ketapang

Thx.. will get it this week. Try oc to 4.5ghz with that cooler, i wanna see @@
Will this oced proc got problem if stay 80-90c+ 24/7?

I would like to but my mobo limits my oc for now. imho hyper212+/evo can handle oc around 4.3~4.4Ghz. More than that you need a better cooler. For temperature, just keep your load temperature below 90c & it should be okay.

Z77M-D3H no Vcore setting as per Manual (page 40 - only DRAM voltage).
Btw,
here is new F7.



This post has been edited by stasio: May 15 2012, 12:20 AM

So you have just bought a wrong mobo for OC.
Looks bad without vCore sliders.

This post has been edited by owikh84: May 15 2012, 12:22 AM

@owikh

I've tried using the latest bios, still the same.
time to fund for p8z77-v then..

Bought myself a 3570k yesterday, searched the whole bulding in Digital Mall, all no stock for 3770k, dafuq.
Using H100(ADDA Fans), temperature is
STOCK:
idle: 38c, max load: 65c.

---

Added on May 15, 2012, 8:49 amWill try and overclock later.

This post has been edited by JeffreyYap: May 15 2012, 08:49 AM

Yes, I saw Gigabyte posted F7 bios on their website last night.
However it was not available to download.
It seems they fixed the link this morning. Thanks for the link.

I didn't read the manual. And I hope the next bios will fix this (like what they did on the x58 mobo).
I'll run it at default voltage in long run anyway since it is for my HTPC.
Without the vcore, I just couldn't tell how far the chip can go.

---

Added on May 15, 2012, 9:25 amYes, this is not the right one for OC.
I'll dump it if I can't stand the itchiness for OC.

This post has been edited by ALeUNe: May 15 2012, 09:25 AM

For Gigabyte Z77M(H) series and I beleive also Asus (and others low cost boards),NO Vcore are implemented in the BIOS.

However,
I can do modified BIOS from Z77-D3H, (which have Vcore in BIOS) to flash your Z77M-D3H.
Atm,
I running BIOS for UD3H/UD5H on my mobo D3H.

This post has been edited by stasio: May 15 2012, 12:56 PM

For H77 series, yes, I can understand it doesn't need vcore.
But it's a bit no brainer to leave out vcore option in Z77 mobo.

I would be grateful if you could make me one customized bios.

OK,
give me 10 min.



This post has been edited by stasio: May 15 2012, 12:40 PM

It's Gigabyte Z77M-D3H (Rev 1.0).

OK,
here is latest BIOS F13 for Z77-D3H, modified to be flash only for Z77M-D3H:
http://www.mediafire.com/?77baa5khd9pwwvb

Flash either with QFlash (prefered) or any GB flashing tools
BIOS,CPU-Z,ET6 and another software will show Z77-D3H.

Let me know (supose to have Vcore in BIOS).

This post has been edited by stasio: May 15 2012, 01:09 PM

Many thanks.
Leaving office now. I'll flash it once I reach home.
Many many thanks.

Nope bro (hope is OK).
(Be carefull with Vcore !! ,he,he)

Also,
I can do this also for Asus low cost boards (or any).

Tried also BIOS for UD5H on my D3H (but must disable one Lan in BIOS).



This post has been edited by stasio: May 15 2012, 01:47 PM

Hi guys,anybody with Gigabyte Z68P-DS3 rev.2 or Z68AP-D3 (rev.2) and Ivy Brigde K-series?

Here is test Z68 AMI BIOS with unlocked multi for Ivy K-series (instruction how to flash included):

Z68P-DS3 (rev.2) - UA4

- 04.May 12

Z68AP-D3 (rev.2) - UA4

- 03.May 12

You MUST use FLASHEFI included in the file and type proper commands in DOS with Bootable USB Flash Drive to flash.
May need to use /Z or /X switches still, sometimes had to use with SPIFlash (Letter case matters too, so may need to try /Z or /z, ect).
http://forums.tweaktown.com/gigabyte/27576...lash-guide.html

This special FLASHEFI is for all Z68 motherboards,to be flashed with AMI BIOS,as all will get new BIOS ID code.
Good luck!

Feedback welcome.

Posted also here:
http://forums.tweaktown.com/gigabyte/28441...a-bios-598.html


This post has been edited by stasio: May 15 2012, 01:42 PM

Interesting on how a BIOS can be modded in this thread, in just 10 mins. Well done stasio!

3570k OC to 4.2 without voltage tweak. Can go higher, but i'm satisfy now since no need to tweak voltage. The fans on H100 running 50%


This post has been edited by JeffreyYap: May 15 2012, 04:13 PM

The bios is successfully flashed. It's detected as Z77-D3H.
However the setting is not running in actual.
I set 1.3v in bios and load with OCCT but the CPU-Z still show default vcore.

Could your mobo run in different core voltage with the modified bios?
Any idea?

This post has been edited by ALeUNe: May 15 2012, 04:10 PM