Ivy Bridge Overclocking V1 | 3770K/3570K | Z77, Torture Your CPU, Post It Here!
|
|
 Feb 24 2013, 11:44 AM
|
 
Senior Member
5,263 posts Joined: Sep 2011 From: Putrajaya,Kuala Lumpur 
|
QUOTE(ZaiNor-DI255 @ Feb 24 2013, 09:35 AM) Its normal if u clock ur proc at high frequency. how much overclock ur processor and how much is the core voltage? easier if u post your cpu-z reading I'm currently at work.Will post it later.But last night i've stressed my CPU to 4.7++GHz on 1.405v using Prime95. |
|
|
|
|
|
Feb 24 2013, 11:50 AM
|
Junior Member
72 posts Joined: May 2011 From: Negeri Sembilan 
|
its normal then. u might have to upgrade to a better cooling to lower ur temp
 |
|
|
Feb 24 2013, 12:13 PM
|
|
Senior Member
5,263 posts Joined: Sep 2011 From: Putrajaya,Kuala Lumpur
|
QUOTE(ZaiNor-DI255 @ Feb 24 2013, 11:50 AM) its normal then. u might have to upgrade to a better cooling to lower ur temp Actually,i'm using stock bigwater A80 thermal paste..should i change? |
|
|
Feb 24 2013, 02:49 PM
|
All Stars
18,503 posts Joined: Oct 2007 From: P.Jaya
|
Asus ROG CPU-Z 1.63.0
Installer: http://www.cpuid.com/medias/files/software...og-setup-en.exe Portable 32/64-bit: http://www.mediafire.com/?9unrbmbqb5wh73d |
|
|
Feb 25 2013, 11:19 AM
|
|
Junior Member
72 posts Joined: May 2011 From: Negeri Sembilan
|
QUOTE(Cable707 @ Feb 24 2013, 12:13 PM) Actually,i'm using stock bigwater A80 thermal paste..should i change? yup. u should change ur TP. suggest the Tuniq TX-4, arctic mx-4 or if u can find it, the coollaboratary liquid pro or liquid ultra. if u read some post b4, some ppl see abot 3~10C temp changes using the liquid ultra/pro which is quite a lot. anyway, goodluck  This post has been edited by ZaiNor-DI255: Feb 25 2013, 11:20 AM |
|
|
Feb 26 2013, 03:11 PM
|
Junior Member
332 posts Joined: Jan 2007 From: taman samudera,batu caves
|
muhiann | 3570K | 4.6GHZ | MSI Z77A-G43 | Corsair hydro h100i
[attachmentid=3321795] Finally i can get this speed and much more lower temp.using maximum voltage available on this mobo. this after i realize i not put waterpump backplate in correct position so contact to cpu not evenly. now i fix it already so my h100i now running in full performance to make my oc more higher. |
|
|
|
|
|
Feb 26 2013, 04:11 PM
|
 
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan 
|
QUOTE(muhiann @ Feb 26 2013, 03:11 PM) muhiann | 3570K | 4.6GHZ | MSI Z77A-G43 | Corsair hydro h100i Good job bro. Orientation is important for AIO watercoolers like H100i.Finally i can get this speed and much more lower temp.using maximum voltage available on this mobo. this after i realize i not put waterpump backplate in correct position so contact to cpu not evenly. now i fix it already so my h100i now running in full performance to make my oc more higher. List updated. |
|
|
Feb 27 2013, 01:52 AM
|
|
Junior Member
72 posts Joined: May 2011 From: Negeri Sembilan
|
congrats! 4.6GHz @ 1.336V and the temp doesnt even hit 100C... maybe i'll re-sit my cooler also during next upgrade
This post has been edited by ZaiNor-DI255: Feb 27 2013, 05:06 PM |
|
|
Feb 27 2013, 07:58 PM
|
|
Senior Member
5,263 posts Joined: Sep 2011 From: Putrajaya,Kuala Lumpur
|
Noob here...
 4.7GHz succeeded..  
|
|
|
Feb 27 2013, 08:18 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(Cable707 @ Feb 27 2013, 07:58 PM) Noob here... Nice try but that's not really a successful overclock. You are hitting TJmax of 105C so the speed is throttled down. 4.7GHz succeeded.. Besides that your GFlops is way too low like running dual core only. Try low frequency ie 4.2-4.5GHz and lower vCore to reduce the temp. |
|
|
Feb 27 2013, 08:49 PM
|
|
Senior Member
5,263 posts Joined: Sep 2011 From: Putrajaya,Kuala Lumpur
|
QUOTE(owikh84 @ Feb 27 2013, 08:18 PM) Nice try but that's not really a successful overclock. You are hitting TJmax of 105C so the speed is throttled down. I see..well,i'll definitely try again next time.. Besides that your GFlops is way too low like running dual core only. Try low frequency ie 4.2-4.5GHz and lower vCore to reduce the temp. Btw,may i know what kinda thing that i have to look/monitor while OCing?other than temp of course..  |
|
|
Feb 27 2013, 08:53 PM
|
|
Junior Member
72 posts Joined: May 2011 From: Negeri Sembilan
|
QUOTE(Cable707 @ Feb 27 2013, 08:49 PM) I see..well,i'll definitely try again next time.. well, while stress testing on LINX and Intel Burn Test, make sure the Gflops reading is more than 100. you can read more about this on the front page Btw,may i know what kinda thing that i have to look/monitor while OCing?other than temp of course.. This post has been edited by ZaiNor-DI255: Feb 27 2013, 08:55 PM |
|
|
Feb 27 2013, 10:01 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(Cable707 @ Feb 27 2013, 08:49 PM) I see..well,i'll definitely try again next time.. You might want to go through these OC guides for more details especially the ASRock's one.Btw,may i know what kinda thing that i have to look/monitor while OCing?other than temp of course.. OC Tips & Guides AnandTech - Undervolting & Overclocking on Ivy Bridge shamino's Mem OC Guide on M5G Z77 UEFI OC Tuning Guide Gigabyte Ivy Bridge/Z77 Overclocking Guide Asus Maximus V Formula OC Guide Sandy / Ivy Bridge | Complete Overclocking Guide | *ASRock Edition* owikh84's BIOS settings for 5GHz Memory Overclocking Guide for Intel Ivy Bridge platform |
|
|
|
|
|
Mar 1 2013, 02:58 PM
|
Senior Member
1,148 posts Joined: Jan 2009
|
well, manage to bump up i5-3570K to 4.7Ghz at around 1.84V-1.192V
temp around 60+ for my custom water cooling with 360mm rad. not sure if i wanna try higher clock...  but with this Vcore at 4.7Ghz, i assume i got a nice chip. 
This post has been edited by tplus1: Mar 1 2013, 04:13 PM |
|
|
Mar 1 2013, 05:45 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(tplus1 @ Mar 1 2013, 02:58 PM) well, manage to bump up i5-3570K to 4.7Ghz at around 1.84V-1.192V Try use:temp around 60+ for my custom water cooling with 360mm rad. not sure if i wanna try higher clock... but with this Vcore at 4.7Ghz, i assume i got a nice chip.
Prime95 27.9 Build 1 X64 Prime95 27.9 Build 1 X86 |
|
|
Mar 1 2013, 08:23 PM
|
Junior Member
197 posts Joined: Jun 2011
|
Sifu's.. need some suggestions. Planning to go Intel. Budget rm1.1k - 1.2k. Main purpose is gaming and oc-ing. Just need mobo n proc.
|
|
|
Mar 1 2013, 09:09 PM
|
|
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan
|
QUOTE(Naraw @ Mar 1 2013, 08:23 PM) Sifu's.. need some suggestions. Planning to go Intel. Budget rm1.1k - 1.2k. Main purpose is gaming and oc-ing. Just need mobo n proc. You might consider 3570K (RM700) + ASRock Z77 Extreme6 (RM575) = RM1275.jpg) Please go through ASRock Z77 Extreme6 Review for more details. |
|
|
Mar 1 2013, 09:14 PM
|
Senior Member
1,176 posts Joined: Aug 2008
|
QUOTE(owikh84 @ Mar 1 2013, 09:09 PM) You might consider 3570K (RM700) + ASRock Z77 Extreme6 (RM575) = RM1275 extreme 4 not enough?Please go through ASRock Z77 Extreme6 Review for more details. |
|
|
Mar 1 2013, 09:37 PM
|
|
Junior Member
197 posts Joined: Jun 2011
|
Looks promising. But is there any HUGE perfomance difference compared to i7 3770k? I mean apart from the multi threading.
|
|
Topic ClosedOptions
|
| Change to: |  0.0307sec
 1.07
 6 queries
 GZIP Disabled
Time is now: 30th November 2025 - 12:23 PM |
Quote