bro

i put my router at 3rd floor my house and i place the 2nd homeplug on 1st floor for the ps3

and it works very awesome
i think tp-link better den aztech

guys, i think i'm the most unfortunate person here...my router refuse to function after only 1 day.and now have to wait for TM tech....

Same as you lol.Mine more nice...phone and btu no prob...but internet and iptv down.Yesterday install morning then afternoon like that d.The funny thing is I have to keep restart the crap dlink theb if lucky sometimes can get iptv buty still no internet and wireless..then I check back the dlink box got a big blue ink word ROSAK...and the installer just use it lol

Not really, as long as the device can support vlan.500 (PPPoE for internet) and 600 (bridge for IPTV)
Or, you may check out some option HERE base on your requirement+setup+budget.

i checked the box and mine dont have any wording...my voip is working but having same issue as u.may just our luck?

I have not tried my third floor though. Even 2nd floor also cannot, I doubt third floor can. Same floor nearby it's okay but from one end to the other end, it's connected but sometimes disconnected I think.
Distance from one end of the homeplug to the other end is approx 35 metres away at the same floor. Used to use that for another wireless router at the other end but since it's always crappy and stuff, I dismantled it.


Oh, what I meant was after the MikroTik thingy, I can pretty much use any router or switch or whatever network device right?
Anyway, The router connected to the BTU should be close to the STB? If TM comes and it's very far, they will charge on extra cabling? Is the cable connecting the MikroTik to STB the normal RJ-45 port? If yes, means I should set it up beforehand so TM won't charge some super expensive charges?
Thanks.

If you are referring to RB250GS, then yes, you may use any WAN-base router gateway, just setup PPPoE will do.

If you are referring to RB750/G/GL, itself it's already a router gateway, without wifi, so you can use unmanaged switch to extend connection for other devices.

Not necessary, it depends on where it's your router gateway location & the STB for IPTV area.
If exceeded the standard, installer will charge you.
So it's better you plan your internal home network wiring prior to installation.

Yes, connection from the router gateway to STB is Cat cable.
Yes, I think it's better you plan your home network location & wiring prior to the installation.

Try TP Link router la

This is my experience with my first unifi downtime. The problem is cannot stabilize the link and auth on btu. Called unifi center on Friday night at 7pm and went through the whole process bla bla bla. At 12am same day the problem was solved quite impressed. The reason of the problem was at their server.

This post has been edited by MEngineer: Oct 30 2011, 11:00 AM

Looks like TM is sometimes quite efficient. Issue solved the same day.

The STB is directly connected to the first router gateway after the BTU? Or can it be connected to the 16-port ethernet switch based on your setup?

lol, my case with IPTV hangs occasionally for about 10-15 seconds have been closed by unifi eventhough they never check with me or get any feedback from me.

the problem is still there, i still get the "hang" issue every 20-30 minutes.

just got my unifi installed 2 days ago...and since yesterday already down...called service center they say will settle in 24 hours, now its just 3 hours before 24 hours still nvr receive any call....anyway guys which modem is the best for unifi? cause i see there are many types difference modem but wireless rounter is the same

The STB is connected directly to the RG's port with vlan-tagged 600, I don't see there is a need for a switch in between.
Please take a look at one of the replacement option HERE ,depends on which model, I normally attach the connection diagram at the bottom for better understanding.

Btw, what do you mean by "the first router gateway", is there a second RG?

If you are using the RB750 and wish to extend both internet+IPTV to another section, you may refer HERE for some idea on how to trunk both vlan.500 & 600 over a single Cat cable (credit to JinXXX), either using RB250GS or TD-W8960N on the other section.

wait and test your DIR615 first.. mine was v. bad i replace with vigor 2130 and now great... support unifi and iptv out of box
my fren have stock DIR615 and its stable he is not complaining of anything...

so test urs first maybe no need to spend any money

if you get the usual reboot/wifi drop ... then its better get 1 box replacement with the DIR615... not expensive vlan switch jus for tagging + another good router brand/AP

see my sig for recommen depend on ur use... but wait 1 week test ur stock router first

This post has been edited by izzat80: Oct 30 2011, 05:03 PM

Anyone knows where to buy the Unifi's STB remote control?

Technician came at 11am just now and replaced the shit router.Turn out that the box got a big ROSAK word.lol

---

Added on October 30, 2011, 6:35 pmAnyway,anyone knows how to prioritize gaming while downloading?

This post has been edited by lebHaF: Oct 30 2011, 06:35 PM

http://www.draytek-malaysia.com/2130_unifi.html
Wow!! Something high tech here. KLSEET can add this to the list. Maybe you will try it too xD

I love the "BLOCK" feature!!! Awesomeeeeeee You download, I block you, 5mins no internet! Love it!

EPIC!

Aww... Dual band, but not simultaneous I think!

Saw the feature I need!
"Smart Bandwidth Limit"

---

Added on October 30, 2011, 6:47 pmNo way. Especially when you're using TM default router and sharing with others. You can only limit ur download AND upload to a level that your gaming experience will not be affected. Else, I can't think anything you can do here.


BTW, can UniFi goes IPV6? If yes, how? What's the advantage? Beside higher number of IPs

This post has been edited by IwanAGP: Oct 30 2011, 07:03 PM

so fast! well i was out since 12pm so i not sure if anyone came to fix/replace the router. and TM is working on a sunday thats news to me!

When is sabah going to have unifi? haih