this is just their excuse .....
btw which fine print show we can't root or mod os, does it print on our warranty book ar (sorry i never read that book) ? heehehehe pls don't shoot me .....

Hi guys, found this thread on XDA.
HARD BRICK
Unit does not power up, visibly charge, reach a boot-screen of any kind including a service or "download" screen. A device in this state requires service from the manufacturer or an individual equipped with the proper tools. There is no other way to recover a device in this state. (SpaceMoose1)

and a Debricking/Unbrick/Brick FIX service.


http://www.youtube.com/watch?v=Ami4TQH3cmc

I've managed to roll back to  stock DXJK2 (from Overcome GB v3 c/w latest kernel and ext4)and flashed stock GB  ,DXJPD with Kies.
Here's what i did:

a)Flash with Odin3 v1.7
1. Download P1000DXKM3 from here. P1000DXKM3  -  http://www.4shared.com/file/pqPvd29x/P1000DXKM3.html?
1. Backup your data.
2. Extract the firmware files from the P1000DXKM3.7z file.
3. select P1_add_hidden.pit for .pit file.
4. check repartition.
5. select AP_P1000DXKM3-REV03-ALL-CL874291.tar.md5 for PDA.
6. select CP_MODEM_P1000DXKM1_REV_00_CL873880.tar.md5 for PHONE.
7. select CSC_P1000OLBKM2-MULTI-CL878295.tar.md5 for CSC.
8. Flash your tab and wait for it to restart.
9. Welcome back to stock.

extra steps
10. Root by using SuperOneClick v1.9.5 by CLShortFuse.
11. Unsign Bootloaders by using this SGT-Bootloader-Patch by chainfire and rotohammer.

(courtesy of noxxius, xda)

b) Go to Phone on tab, key in code :  *#272*your device IMEI#
Change CSE code from KOR (korea) to XME (M'sia). The Tab will reboot into recovery then auto reboot into the default start menu/set up
c) Now flash DXJK2 using Odin. Rom here:http://www.4shared.com/file/-87CbOF3/P1000DXJK2.html?
Use pit and put the entire tar file into PDA.
d) Connect to Kies, now rom detected as CSC - XME and xme gingerbread offered as update. Well. you know the rest.
As for rooting, I used Chainfire CF Root.

Hope this helps. Rgds.

Hi kokifung,

Samsung Service Centre is along the Federal Highway just before the slip road turning into Jln 222, PJ. Same row with Hong Leong Bank.

I don't think the have a service centre in Subang Jaya.

Only original sets are free within the warranty period.

The extra step is it important to follow to be able to update to Samsung v3.3.3 via Kies?

You can try with kies and see if it works. For me second time around (due to something i tried which ended with boot screen), after DXKM3 when i checked with *#1234# all the codes were there and i then connected to kies and proceeded to upgrade once again.

If you try with kies and it doesn't work then you have to continue with other steps.

Sorry, but can you elaborate a bit more on the extra steps? I am fine up to step 9 thereafter, am at a lost.

Thanks.

icic.. so far ar.. zzz
see when have time only able to send in..
everyday also need to work. the center usually opens what time to what time??

for steps 10 and 11, you can find the links here: http://forum.xda-developers.com/showpost.p...16&postcount=62

thats where i am now..will update if successful...

anyone having maxis 3g down time now ???
my phone seem like no 3g/edge or any internet connection now .....

anyone having maxis 3g down time now ???
my phone seem like no 3g/edge or any internet connection now .....

hello all ! just got my tab yesterday, n still in the midst of downloading apps into it, very nice to use

n thanks to the TS, first few post was reli useful

try restart your tab. it will ok -from my experience la.
sometime i also kena like that.