hmm those rubber type of soundproof ok? The one we spra on top of it and stick it onto ur bonner hood, to reduce sound and heat, which will also delay ur hood front fading color soon

wow what causing that? looks like water mark for some pictures

yes the door one looks like water marks, its been there for about 2 weeks or so already, dont know what caused it and how to get rid of it. any suggestions?

there is a forumer said that some water leakage happen to his car . i forgot who liao..not sure whether he found a solution for this matter or not ...is it water leakage from ur case oso ? quite serious..

doubt my case is same..but this "water mark" on the door isnt such a big deal cos when u close the door u dun see it at all..but the one on the gear shifter there can be a bit of an eyesore when u look at it..dunno how to get rid of that

Use wax also can't get rid of it?

use wax on the gear shifter there? err..is that ok?

i did the rubber type soundproof apply at the door side 1....the 3m rubber sound/windproof, really have lots of improvements.....
nw plan 2 do autofoam and soundproof all 4 doors and bonet...

Try nail polish remover? U can get them easily at Guardian/Watson.

^I don't think that is a good idea.... Using acetone may be better on this....

This post has been edited by kyheng: Mar 27 2011, 10:05 PM

wow seems got alot aftermarket accessories to install - -

Acetone? whats that?

A type of solvent that won't attack plastic works.
Wait, I may made it wrong. It might be toluene.. Need to confirm back first on this....

ok. do let me know where to buy it as well. thx

The problem is, you can't buy in small volume(must buy in 20L).... If can, I already bought 1L of toluene and pour into my car's petrol tank, haha.....

Is crystal number plate legal?

Digital Alignment & Balancing

RAYDIANCE WHEELS SDN BHD
NO.23-25 Jalan PJS 8/12, Mentari Business Park, Bandar Sunway, Selangor, 43500

Ever wondered why some place just can't get your rims/tires balancing right? Well most of the time it boils down to a well calibrated machine... but sometimes a brand new 20k machine works even better!



When Raymond told me about his new toys I made my way there and was impressed they managed to balance my badly out of shape 17in rims. It made me believe that those new digital balancing machines were working very very well.



So now I'm back after fixing those 4 rims for another round of perfection. This time it was a breeze to balance the reworked rims and new tires. Soon its up for the digital Sino-Italian alignment machine. Man I love new toys especially expensive ones but guess what?

You would think this will cost a bomb right? The alignment + 4 rims balancing came to RM45 !!!
That's even lower than my regular place! For sure Raydiance Wheels will be my regular-regular! Well-done Raymond!


(Raymond-Raydiance & Enson-MFC being poisoned by sexy rims)

This post has been edited by kiaforteclub: Mar 27 2011, 11:13 PM

thanks for this info, those stupid old shop cannot balance properly, giving me so much trouble, and one in puchong even said cos my tire is different. (instead of 185 i'm using 195).

i still in progressing on soundproofing in boot, next will be 4 doors, roof and final ll be floor, hehe... today js done the dampening mat on boot, forgot to take final product picture due to hard too dirty, and tinted the rear light.


Anyway how the 3M rubber look like? can upload the pic show to us? might think of add that on my car too, hehe...

This post has been edited by behkokhong: Mar 28 2011, 12:08 AM

wow the rear lamp so dark de ?