GSkill RipjawsX 2133C7 2x2GB @ 2260Mhz 7-10-10-27-1T - stock VCCSA


2133Mhz 6-10-6-27-1T

holy sh*t .... sandy bridge really OC baby....

5.3Gz owh man... this is awesome...

btw, stable ??

This post has been edited by subrok007: Feb 5 2011, 10:40 AM

hey guys i OC my 2600k to 4Ghz . my 1st time .

but is 58c too high @1.15v ?

also . i left LLC auto.

should i set it to regular ? medium ?

what u guys recommend ?

i ran prime95 overnight it and it was ok .

Populated DIMM slots...

GSkill RipjawsX 2133C7 4x2GB @ 1600Mhz 7-7-7-20-1T, 1.65v VTT 1.2v
- 1600C6 no post


1866Mhz 8-9-8-24-1T, 1.775v vdimm, VTT 1.35v
- 8-8-8-24 no post


2133Mhz 9-10-10-27-1T, 1.8v vdimm, VTT 1.4v
- 2133C8 no post

58C at full load then should be ok.

ok thanx.

also my LLC is auto.

should i put it to regular/medium/high ?

I you are only OC to 4GHz, auto is fine.

ok. maybe want to try to 4.5ghz.

anyways here is my results with 1.15v@4ghz.

what cooler you using? Nice temps

im using the same cooler as u bro.

hyper212+ !

I has sad i7 2600K cooler by so much compared to i5 760...

linx is flawed on HT even with the new linpack libary

4.8ghz 1.41v HT on temps max 75/76C
4.8ghz 1.39v HT off temps max at 82/83C

lol

this is with my already crapped out alphacool yellowstone because of the indigo extreme.

will try with another block and hope fully with indigo extreme again.
me thinkest indigo will love this sandy bridge because it performs well in high temps only aka 75++

also hmm testing that pll overvoltage thingy.. it seems this is the main cause of the lower glops
not really pll voltage persay

This post has been edited by cstkl1: Feb 5 2011, 07:41 PM

erm guys...
wanna ask 1 question...
is asus m4e+i5 2500k is OC able like asus m4e+i7 2600k??
different only on HT right??
my budget is kinda tight now...just can afford i5 2500k...mybe....
beside i like asus M4E design....

just get 2500k.... the only difference is HT. Not sure about the OC ability though.

not just ht dude..

l3 cache..thats a biggie difference.

look at those numbers!!!!

ok thanks sifu's....

@kevink82
WTH?? almost 6Ghz??

bugged
y u think no cpuz lol

test 4850 2200mhz CL7 HT on 1.44v
Prime95 Blend 3250mb Max temp 82C - 2hours run
Linx with lates Linpack 3250mb Max Temp 77C - 2 hours run
4850mhz HT off 1.41v
Prime 79C 30 mins run
Linx 84C

Yea its a major bug in ai suite 2, prime 2 hrs is hardly enough with blend. I tested 4.8 with 6 hours no problem with blend and small fft and it will still bsod sometimes.

Think there is no accurate stability test for Sandy Bridge

prime if u do anything less than 12 hour is just considered a memtest

finish the whole fft's

currently i dont trust any HT on test.
lol..

just running atm 4850ghz at 2200mhz CL7 HT off

will try higher when i replace my cpu block and TIM

This post has been edited by cstkl1: Feb 5 2011, 11:31 PM