GSkill RipjawsX 2200C7 2x2GB @ 2240 7-10-7-27-1T 1.65v


Patriot Viper II Sector5 2400C9 2x2GB @ 2240 7-10-8-27-1T 1.75v
- 2400MHz, no boot


Corsair DomGT 2000C7 2x2GB @ 1866 7-7-7-20-1T 1.7v
- 2133MHz C7,C8,C9 is bootable but failed 32M


This post has been edited by owikh84: Feb 9 2011, 06:42 AM

Fuhh, long time didnt drop by. Darn, nice sharing mate~

that is some serious high voltage on that 5.2 ghz oc, btw anyone heard anything bout how malaysia is gonna handle the p67 recall for M4E? do we get to replace our boards?

Ya, anyone heard anything from Asus Malaysia? Do we get a refund?

Asus has issued a product recall recently.
http://event.asus.com/2011/SandyBridge/notice/

Heard Giga will offer refund to affected buyers.
So i will hv to return 2 boards lol.

1stly,hepi chinese new year..

guys,when will new batch for SB coming?

But that is just Asus Global official statement, just don know how Malaysia Distri will handle this.

i dont know if i will bother replacing it, if they swap me a new board yea sure but if they take it in for rma then its gonna take a while........ in the end i still have to rip the comp apart for this

I5 2500k+CM Hyper 212 plus+tuniq tx-2 at 4ghz

CPU:28
Core1234:38,41,39,37

Are the temps normal?Running 4Ghz non-stop

Im not worried coz when the new replacement board arrives then only swap one to one with them. Stil got another one for spare.
Hit 85glops when i bump vcore from 1.5v to 1.51v, but fail LinX at 19.

i think i will just wait and only rma after new batch out. For now, actually can stick to the 6gbps port or the marvel port...

if anyone here successfully rma, post here ya

Hi guys, i've overclocked my i5-2500k to 4.2GHz, but currently i facing a problem, its my system is showing it running @ 3.29GHz instead of 4.2GHz, how do i make my system to detect that its overclocked? Thanks for the help.
I tried Mafia 2 benchmark tool, it also detects my CPU is running at 3.2GHz instead of 4.2GHz.

Please check the attached photo for more info.

My setup is:-

i5-2500k
8GB value ram
Gigabyte P67A-UD3P

EDIT: My voltage in BIOS is running at 1.2xx but then CPU-Z showing it run at 1.056, doesn't seems right to me.

This post has been edited by kEazYc: Feb 3 2011, 11:17 PM


Attached thumbnail(s)

Look carefully at the core speed it says 4190 which is basically 4.2 ghz. The game doesn't recognize overclocked speeds i think.

If the game doesn't recognize the speed, no way my system couldn't recognize as well right? :S

Hmm I am also in the same situation, but cycom guy help me overclock so I'm sure it's overclocked

Some game and benchmark shows original speed, its overclock dont worry.

Some BSOD codes:

0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage

More info: http://www.overclock.net/intel-general/910...guide-p67a.html

hey guys this is my 1st time overclocked my SB setup.

is the temp high @1.15v ?

what is the temp limit for i7 2600k ?



also i didnt turn on the air-con.

This post has been edited by ukimaro: Feb 4 2011, 11:08 PM

This might sound stupid, but what is the problem with P67 board anyway, my noob brain could not understand what's going on here. I'm using Asus P67 pro.. should i be worry ?

please use google. It something related to the chipset bug. Only SATA 3gbps port involved.