Here http://forums.vr-zone.com/hardware-depot/1...ark-leaked.html

the results still questionable since no cpu z is display and what speed it is running behind...

cant even see much but i see cpuz with sandy...

is that an MSI board?

link from bit tech and asrock

too many news,so little confirmation...no matter,i want u all thuban when u guys buy BD

yup board from MSI because of the GD80

onli selected people have the details, just have to be patient and wait

Any one can tell me how to oc to 4.2Ghz and how much the V-core need to set, and i download a lot of software also cannot show my temperature... any subjection?
Below is my old setting.....

- Windows 7 Ultimate 32-bit
- Phenom II 555BE unkock to B55
- Revision : RB-C3
- Max CPU clock speed : 3808.1 MHz (238*16.5)
- CPU voltage : 1.424 V
- Northbridge clock : 2100.0 MHz
- HTT link speed : 2142.1 MHz
- HTT link voltage : stock voltage
- Motherboard : GIGABYTE 890GPA-UD3H
- Type of cooling : Cooler Master Hyper 212+ (Air)

This post has been edited by hmjian: Apr 29 2011, 02:50 PM


Attached thumbnail(s)

Software canot lower your temperature...
with increase of proc clock speed and vcore, temp will surely raise...
if you want to lower your temperature, lower clock speed, vcore or use better cooling v a good air flow case...
anyway i can get 3.6Ghz on stock vcore ~1.4v...
i guess u need a lot more for 4.2Ghz,
i nvr try 4.2Ghz, perhaps the sifus here did?

This i know , i mean the software cannot show me the core temperature... u can check the pic attach....
thanks for answer....

wah ur typo so serious... l and h distance so far...
i tot u really meant slow...

corrected ...

after unlocked, usually there are no reading for core#0-3 temperature.

oic thanks brother...

use gigabyte's easytune utility and compare with hwmonitor to see which is cpu temp

as for 4.2ghz stable @ 4cores, will be quite hard

oic, i will try this... thanks for help...

Looks like marketing BS to me...

wafak?? what marketing BS?? who is marketing what?

It is too obvious that Asrock is marketing their mobo. Is it really that hard to see

man.. asrock indeed doing some marketing..but wht is BS about that?
plus that socket will be used by all am3+ mobo later on.. if all of em is BS, then why need new socket? better stick to older socket and just connect the idle hole..easy..

so,how bout asus n msi claming that bios upgrade will do?

or diff flavor of am3+?
speculation,speculation

I did not say the new socket is BS. Please find a word in my post that says the new socket is BS. I have NEVER EVER said the AM3+ is BS. I stand stand firmly on this statement.

bulldozer aside...is it safe to run the tmpin02(nb or imc) over 50'c?