Sandra 2005 Memory Ranking

# this thread/ranking is meant for memory overclocking database.
# kindly post your screenshot of Sandra 2005 Memory Benchmark
# also needed is a screenshot of CPU-Z Memory Info

# pls copy the template below and complete the information based on your system.

CODE

RAM = 2x256mb Kingston HyperX PC3200
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.0 V
1T OR 2T = ???
system = Athlon XP-M
CPU speed = 2530 MHZ

SOCKET A (Athlon/Athlon XP/Duron/Sempron)
1. alvarez - 4156 PTS - Corsair 3200LL 1.1 BH5 @ 11-2-2-2 @ 1T @ 270 MHZ @ 3.67 VDIMM
2. tone - 4106 PTS - Kingston HX BH5 @ 11-2-2-2 @ 1T @ 267 MHZ @ 3.72 VDIMM
3. tony - 4015 PTS - Kingston VR BH5 @ 11-2-2-2 @ 1T @ 260 MHZ @ 3.4 VDIMM
4. Asus - 4005 PTS - Kingston HX BH5 @ 11-2-2-2 @ 1T @ 260 MHZ @ 3.6 VDIMM
5. charge-n-go - 3983 PTS - Corsair 3200XL TCCD Rev 1.2 @ 2.5-3-3-11 @ 1T @ 260 MHZ @ 2.9 VDIMM
6. tony - 3976 PTS - Twinmos SP CH5 UTT @ 11-2-2-2 @ 1T @ 257 MHZ @ 3.7 VDIMM
7. HydefK - 3955 PTS - Twinmos CH5 UTT @ 11-2-2-2 @ 1T @ 255 MHZ @ 3.3 VDIMM
8. kelvin_hata - 3954 PTS - Corsair PC3200 CH5 @ 11-2-3-2 @ 2T @ 265 MHZ @ 3.3 VDIMM
9. gsan - 3906 PTS - Corsair XMS PC3500 BH5 @ 11-2-2-2 @ 1T @ 253 MHZ @ 3.7 VDIMM
10. error - 3855 PTS - GSkill LE PC4400 TCCD @ 11-3-3-2.5 @ 1T @ 251 MHZ @ 2.9 VDIMM

11. takatadome - 3825 PTS - Corsair XMS PC3200 BH5 @ 11-2-2-2 @ ?? @ 248 MHZ @ 3.36 VDIMM
12. jenggo - 3786 PTS - Twinmos SP CH5 UTT @ 11-2-2-2 @ 1T @ 255 MHZ @ 3.3 VDIMM
13. dinster - 3764 PTS - Kingston HX BH5 @ 11-2-2-2 @ 2T @ 245 MHZ @ 3.0 VDIMM
14. ah_khoo - 3708 PTS - Kingston HyperX BH5 @ 2-2-2-11 @ 1T @ 240 MHZ @ 3.2 VDIMM
15. charge-n-go - 3696 PTS - Kingston VR BT-J @ 11-4-4-2.5 @ 1T @ 246 MHZ @ 2.9 VDIMM
16. pakau - 3668 PTS - Kingston VR BT-J @ 8-4-4-3 @ 1T @ 245 MHZ @ 3.0 VDIMM
17. SaTaNHeaD2003 - 3554 PTS - Kingston VR BT-D43 @ 3-4-4-8 @ 1T @ 253 MHZ @ 2.8 VDIMM
18. Austin - 3552 PTS - Kingston VR BH-75 @ 11-2-6-2 @ 1T @ 236 MHZ @ 3.25 VDIMM
18. kelvin_hata - 3441 PTS - Geil PC2100 @ 11-3-3-2 @ 2T @ 225 MHZ @ 2.9 VDIMM
20. CHICANOS - 3424 PTS - Kingston VR BT-D43 @ 2.5-3-3-5 @ 2T @ 228 MHZ @ 2.8 VDIMM

SOCKET 754 (Athlon64/Sempron)
1. soulfly - 4867 PTS - OCZ EL Plat Rev2 TCC5 @ 2.5-4-3-7 @ 1T @ 316 MHZ @ 2.9 VDIMM
2. embuhnator - 4733 PTS - Adata DDR600 @ 8-4-4-2.5 @ ?? @ 310 MHZ @ ??
3. jslut - 4249 PTS - GSkill LE TCCD @ 10-3-3-2.5 @ 1T @ 275 MHZ @ 3.28 VDIMM
4. fatalynx05 - 3916 PTS - Hynix BT-D43 @ 2.5-4-4-11 @ 1T @ 255 MHZ @ 2.8 VDIMM
5. Najmods - 4129 PTS - Corsair TwinX XMS PC3200 Promos rev.A @ 3-4-4-8 @ 1T @ 273 MHZ @ 2.8 VDIMM
6. soulfly - 3895 PTS - Twinmos SP CH5 UTT @ 11-2-3-2 @ 1T @ 256 MHZ @ 3.2 VDIMM
7. soulfly - 3824 PTS - Kingston VR DT-D43 @ 10-3-3-2.5 @ 1T @ 250 MHZ @ 3.0 VDIMM
8. takatadome - 3632 PTS - Corsair twinX 3200LL v1.1 BH5 @ 11-2-2-2 @ 1T @ 240 MHZ @ 2.8 VDIMM
9. low yat 82 - 3486 PTS - Kingston VR PC3200 Mosel @ 3-3-3-9 @ 1T @ 230 MHZ @ 2.8 VDIMM
10. xboxmy - 3381 PTS - Samsung PC3200 TCCC @ 8-4-4-2.5 @ ?? @ 220 MHZ @ 2.6 VDIMM
11. [the][matrix] - 2695 PTS - Kingston VR BT-D43 @ 8-3-3-3 @ 2T @ 204 MHZ @ 2.73 VDIMM

SOCKET 939/940 (Athlon64/Athlon64 FX)
1. kevin228 - 8201 PTS - OCZ EL PC4800 TCCD @ 2.5-4-3-5 @ @ 308 MHZ @ 1T @ 2.93 VDIMM
2. gigaleon - 8161 PTS - @ 2x512MB @ Gskill FC TCCD @ 2.5-4-4-8 1T 308 MHZ @ 2.8 VDIMM
3. babyelf - 8125 PTS - Gskill LE PC4400 TCCD @ 7-3-3-2.5 @ @ 302 MHZ @ 1T @ 2.7 VDIMM
4. Westley - 8113 PTS - @ 2x512MB @ Gskill FC TCCD @ 2.5-4-4-8 1T 305 MHZ @ 2.75 VDIMM
5. kelvin_hata - 8044 PTS - Corsair PC4400 TCCD @ 8-4-4-2.5 @ 1T @ 321 MHZ @ 3.07 VDIMM
6. arj - 8022 PTS - OCZ PC4200EL Platinum TCCD @ 6-4-4-2.5 @ 1T @ 322MHZ @ 3.2 VDIMM
7. babyelf - 8002 PTS - Corsair 3200LL 1.1 BH-5 @ 5-2-2-2 @ 1T @ 267 MHZ @ 3.5 VDIMM
8. kazama - 8002 PTS - @ 2x512MB @ Gskill FX TCCD @ 2.5-3-3-5 1T 300 MHZ @ 2.76 VDIMM
9. tampoi - 7521 PTS - @ 2x256MB @ Corsair XMS2700LL Rev1.1 BH5 @ 2-2-2-5 1T 272 MHZ @ 3.6 VDIMM

10. rlhc17 - 7867 PTS - Twinmos SP CH5 UTT @ 6-2-2-2 @ 1T @ 264 MHZ @ 3.55 VDIMM
11 kianwee - 7818 PTS - OCZ EL Plat Rev 2 TCCD @ 6-3-4-2.5 @ 1T @ 312 MHZ @ 2.8 VDIMM
12. irenic - 7816 PTS - OCZ EL Plat Rev 2 TCCD @ 10-3-4-2.5 @ 1T @ 300 MHZ @ 2.8 VDIMM
13. antonio_zth - 7625 PTS - Mushkin Black PC4400 TCCD @ 2.5-5-6-12 @ 1T @ 305 MHZ @ 2.7 VDIMM
14. ray99mond - 7538 PTS - Gskill FC TCC5 @ 8-4-4-2.5 @ 315 MHZ @ 1T @ 3.1 VDIMM
15. tampoi - 7521 PTS - Kingston VR BH6 @ 2-2-2-5 @ 1T @ 264 MHZ @ 3.6 VDIMM
16. ah_khoo - 7470 PTS - Gskill FC TCCD @ 2.5-4-4-8 @ 280 MHZ @ 1T @ 2.67 VDIMM
17. jarofclay - 7447 PTS - Kingston VR Hynix D43 @ 5-4-4-2.5 @ 255 MHZ @ 1T @ 2.8 VDIMM
18. Evogenix - 7379 PTS - Twinmos SP CH5 UTT @ 2-2-2-5 @ 1T @ 272 MHZ @ 3.6 VDIMM
19. e-jump - 7280 PTS - Kingston VR DT-D43 @ 2.5-3-3-11 @ 1T @ 244 MHZ @ 2.8 VDIMM
20. remysix - 7250 PTS - OCZ VX Value BH5 @ 2-2-2-5 @ 1T @ 267 MHZ @ 3.7 VDIMM

PENTIUM 4 DDR2 (SOCKET 478/LGA775)
1. pcmoddingmy - 8366 PTS - Corsair XMS2 PC2-5400 @ 15-5-5-5 @ ?? @ 346 MHZ @ 2.0 VDIMM
2.

PENTIUM 4 DDR1 (SOCKET 478/LGA775)
1. kcnyc - 6788 PTS - Adata PC4000 @ 8-4-4-2.5 @ ?? @ 290 MHZ @ ??
2. wanek - 6643 PTS - OCZ Plat Rev 2.0 TCCD @ 3-4-4-8 @ 1T @ 300 MHZ @ 2.7 VDIMM
3. zt_lee - 6639 PTS - Corsair XMS Rev 1.4 TCCD @ 8-4-4-3 @ 1T @ 300 MHZ @ 2.8 VDIMM
4. prancingHORSE - 6498 PTS - Kingston HX BH5 @ 5-2-2-2 @ ?? @ 3.2 VDIMM
5. kucingfight - 6458 PTS - Kingston VR DT-D43 @ 3-4-4-8 @ 1T @ 278 MHZ @ 2.75 VDIMM
6. gavlim - 6306 PTS - Corsair 3200 XLPT TCCD @ 8-4-4-3 @ 1T @ 263 MHZ @ 2.9 VDIMM
7. cpteoh - 6265 PTS - @ 2x512MB @ PQI Turbo PC3200 Infinieon BE-5 @ 3-3-2-6 1T 261 MHZ @ 2.74VDIMM
8. KahLooN - 6263 PTS - Kingston VR D43 @ 2.5-4-4-8 @ 1T @ 260 MHZ @ 2.8 VDIMM
9. dekra - 6252 PTS - Kingston VR BH5 @ 5-2-3-2 @ 1T @ 237 MHZ @ 2.8 VDIMM
10. Evogenix - 6241 PTS - Hynix BTJ @ 6-3-4-2.5 @ ?? @ 255 MHZ @ 2.85 VDIMM

11. x714n - 6225 PTS - OCZ PC4000 @ 5-4-4-2.5 @ 1T @ 250 MHZ @ 2.85 VDIMM
12. Mowgli - 6170 PTS - Mushkin Black L2 PC3500 BH5 @ 2-2-2-5 @ ?? @ 255 MHZ @ 3.4 VDIMM
13. tone - 6121 PTS - Kingston HyperX PC3200 BH5 @ 5-2-2-2 @ ?? @ 253 MHZ @ 3.6 VDIMM
14. Asus - 5920 PTS - Kingston HX BH5 @ 6-3-3-2.5 @ 1T @ 224 MHZ @ 2.8 VDIMM
15. Westley - 5919 PTS - Kingston VR BT-D43 @ 3-4-4-8 @ 1T @ 250 MHZ @ 2.8 VDIMM
16. fendii - 5888 PTS - Kingston VR BT-D43 @ 3-3-3-8 @ 1T @ 247 MHZ @ 3.46 VDIMM
17. kenling - 5719 PTS - Kingston VR BT-D43 @ 5-3-4-2.5 @ 2T @ 246 MHZ @ 2.8 VDIMM
18. Asus - 5641 PTS - Hyundai PC2700 BT-J @ 8-4-4-3 @ 2T @ 258 MHZ @ 2.8 VDIMM
19. ychwang - 5626 PTS - Hyundai BTJ @ 5-3-4-2.5 @ 1T @ 251 MHZ @ 2.8 VDIMM
20. ask_know - 5612 PTS - Kingston HX BH5 @ 5-2-2-2 @ 1T @ 216 MHZ @ 2.8 VDIMM
@ 2.85 VDIMM

This post has been edited by dinster: May 18 2006, 10:49 PM

Bt-J 256MB x 2 Dual Channel
Pentium4 northwood 3.0->3.75
Vdimm= 2.8v

This post has been edited by ychwang: May 10 2005, 01:34 PM

Sorry for not following the exact rules...
Din---u dont need to put this in the rank..
This is taken long time ago, right now, dun have the RAM with me..
a BTD43...jus wanna share how far can my btd43 go..


RAM = 2x512mb KVR PC3200
chipset = BTD43 old chipset
Vdimm applied = 2.8
system = AMD64

RAM = 2 X 256MB KVR PC3200
CHIPSETS = HYNIX BT-D43
VDIMM APPLIED = 2.8V
SYSTEM = AMD ATHLON XP

RAM = 2x256MB KVR PC3200
chipset = BT-D43
Vdimm applied = 2.8V
system = Sempron (S-754)


Attached thumbnail(s)

mine

RAM = 2x512MB TwinMOS SP pc3200
chipset = Winbond utt [ch-5]
Vdimm applied = 3.6 vdimm
system = amd64 3200+ @ 2.58GHz

Evogenix


Attached thumbnail(s)

RAM = 2x256MB Corsair PC3500
chipset = Winbond Bh5
Vdimm applied = 3.52vdimm
system = amd mobile barton 2400+ @ 2.53G

So far highest is AMD64 leading with 7K+ points

This post has been edited by shinjite: May 8 2005, 03:31 AM

we need more results..

come come.. LY overclockers..

where's the people with TCCD ram.. show up !!

RAM = 2x 256MB Kingston Value RAM PC2100
chipset = Winbond BH-75 (1st generation)
Vdimm applied = 3.25V
system = Duron M (crippled Barton M)

Test Bed:
Cripped 64KB L2 Cache AMD Mobile Barton @ 2650MHz 1.9v
Coolermaster XDream Heatsink with 84cfm 80mm Delta Focusflow Fan
2 x 256MB KVR Winbond BH-75 DDR SDRAM
Abit NF7S v2.0 Vdimm Mod upto 3.25v
Mantaray XT D26 BIOS 1T Command CPU Interface Enabled
Enlight 420W PSU
Asus V7700 Geforce 2 GTS VIVO
30GB Maxtor 7200rpm HDD

Various Setting:
Vcore 1.925v (actual 1.88v)
Vdimm 3.25v
Vdd 1.7v
Vagp 1.5v
CPU Interface Enabled
Clock Ratio set to 6/6
1T Command preloaded in BIOS
Ras to CAS set to either 4 or 6, any tighter timing just results in plenty of errors.

@ 2646MHz DDR481 CL2-6-2-11 no error in memtest86+ test5


Sisoft Sandra 2005 Memory & CPU Arithmetic Benchmarks


CPU-Z 1.27


SPD and Timings


Folding & Prme95 no problem..

@ gsan

you are on 1T / 2T ??

@ ychwang

what's ur applied vdimm ? template has been provided..

mine is 1T but i wonder that why my score is so close to your 240 @ 2T.....

RAM = 2x256mb Kingston Value Ram
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.6 V
system = Athlon64 s939

RAM = 2 x 512 mb GSkill LE
chipset = Samsung TCCD
vDimm applied = 2.9v
System = amd barton (m) 2.4 ghz


Attached thumbnail(s)

here is mine...
pc2100 2.9v dunno wat chipset
GL3LC32G88TG-6
AMD-BARTON

This post has been edited by kelvin_hata: May 8 2005, 04:29 AM


Attached thumbnail(s)

RAM = 2x512MB Kingston Value Ram DDR400
chipset = Winbond Bh5
Vdimm applied = 3.0vdimm
system = amd xp 2.1G

@ error

are u on 1T / 2T ??

@ ychwang

what's ur vdimm ??

@ gsan

the BIOS used is the factor here. i'm using Merlin's D26 Bios..

so Samsung TCCD already shown up..

where's Hynix DT-D43 ? Hynix D5 ? Samsung TCB3, TCC4, TCCC?

ram = 2x256 kvr pc3200
chipset = dt-d43
vdimm = 2.8v only
system = AMD64

btw, its 1T... but memtest xstabil la


Attached thumbnail(s)

updated my result :

score : 7303MB/s
RAM = 2x512MB TwinMOS SP pc3200
chipset = Winbond utt [ch-5]
Vdimm applied = 3.6 vdimm
system = amd64 3200+ @ 2.58GHz

Evogenix


Attached thumbnail(s)

RAM = 2x256mb Kingston HyperX PC3200
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.72 V
system = Athlon XP
Results: 4106 & 3856



tone.

This post has been edited by tone: May 8 2005, 10:12 AM

score 5731
ocz pc4000
vdimm 3.85v
pentium4 3.2


Attached thumbnail(s)

this is my previous athlon xp system

RAM = 2 x 256MB Kingston HyperX PC3200
chipset = Winbond BH5
vDimm applied = 3.6v
System = AMD Athlon XP1800+ @ 2345MHz




Attached thumbnail(s)

How to check wat's the vdimm applied? my bios doesnt shows

This post has been edited by MelvinGoh: May 8 2005, 12:40 PM

@ Asus

1T or 2T ???

@ Melvingoh

in these case, look at the sticker on ur RAM, the default vdimm should be listed there..

P4 people is damn shy

UPDATE

RAM = 2x256mb Kingston ValueRAM PC3200
chipset = BT-D43
Vdimm applied = 2.85 V
1T OR 2T = 1T
system = P4 2.8@3.5

new timing and score...

This post has been edited by victor1987: May 8 2005, 07:47 PM

1T is CPC ON or what, mine is CPC ON

update...2*256 pc2100
2-2-3-11 225fsb 1.1
edit*din tis ram is geil ram...not kingston!!

This post has been edited by kelvin_hata: May 8 2005, 03:26 PM


Attached thumbnail(s)

dinster , mine is 1T in bios. But sandra2005 shows 2T ?

hurm.. looks like there's a bug in Sandra 2005..

nevermind.. i've already modified the template..

just use it ok..

yes,

CPC ON = 1T

CPC OFF = 2T

update

score - 7210
RAM = 2x256mb KVR PC3200
chipset = DT-D43
Vdimm applied = 2.8 V
1T OR 2T = 1T
system = A64 3000+
timing - 2.5-4-4-10 [sorry, lupa cpu-z laa]
but got proof its 1T
boot from bios 2.5-4-4-10 1T 270
use clockgen manage 272 only same timing. higher ~ BSOD

btw, this kVr ownS

This post has been edited by e-jump: May 9 2005, 02:42 PM


Attached thumbnail(s)

MY Sandra 2005 Memory Score: 7867

Ram = 2x512mb TMSP PC3200
Chipset = Winbond UnTesTed
Vdimm = 3.55V
1T OR 2T = 1T
System = Amd64 3500+
Bootable Speed = 2.9Ghz (264 X 11)

This post has been edited by rlhc17: May 9 2005, 05:05 AM


Attached thumbnail(s)

This is mine

Processor : Intel Pentium 4 2.4B@3.21Ghz 178Mhz FSB
Voltage : 1.57V in BIOS, 1.55V in Windows, 1.49V-1.52V under load, prime stable
PAT : ON
Motherboard : Abit IS7E V1.2 Intel I865PE chipset
Memory Modules : 2 X 256MB Kingston Hyper X w/ BH-5 chipsets
Timings : 2-2-2-5-1T
Vdimm : 2.6V
GAT : All Auto




This post has been edited by shinjite: May 9 2005, 02:28 PM

maybe u need to fix this

Yeah yours is the no.1 for now

more results pls !!!!!

how come the p4 group getting more than 5K++... im on i getting 3K++
p4 2.8C @ 3.4 (246) stock vcore
3-4-4-8 @ 5:6 (205) @ 2T stock vdimm
coz my foxconn mobo cant increase the voltage...

where's the screenshot fren ?

use the template given la..

OMG...P4 I am the lowest, paisheh betul

sharing old my intel rig results :
score : 6241MB/s
RAM = 4x256MB Hynix ram
chipset = Hynix bt-j
Vdimm applied = 2.85 vdimm
system = P43.0e @ 3.82GHz

http://evogenix.bizhat.com/RamsBenchmarkTe...25-1024-htE.JPG

Evogenix

Finally an Intel rig broke the 6K mark
Way to go Evogenix

i'm on 2.8v @ Abit Ai7,
sorry long time forgt visit this thread.

ok i updated mine
score 6225


Attached thumbnail(s)

the screenshot cant be viewed

Din, Can ar......

RAM = 4x256mb Kingston HyperX PC3200
chipset = Winbond BH5 (1st Gen)
Vdimm applied = 2.8 V
1T OR 2T = 1T
system = See my signature

waaaaa tangga yg ke10...next!..

more results pls !!!

hi guys here mine using cheap ram
proc : barton 2600@ 2.4ghz
ram : 256x2 infineon
vdimm : 2.70
chipset : i think BTH-5 ( later i check)
score : 3213

i tried 220 already run memtest no prob but when i ran prime got prob

This post has been edited by fatalynx05: May 11 2005, 06:11 PM

using 1T or 2T ?

next time use the template provided ok..

sorry....sorry!!!
btw what is 1T or 2T ?? noob here

This post has been edited by fatalynx05: May 11 2005, 06:06 PM

bleh join ker???

my very2 old & precious results...

RAM = 2x256mb Corsair 3200LL V1.1
Chipset = Winbond BH5 (unknow generation )
Vdimm applied = 3.67 V
1T OR 2T = 1T
System = Athlon XP

link here...

there's a special memory settings in the BIOS..

sometimes it is called CPC ON / CPC OFF..

but not all motherboards has these settings..

RAM = 2x256mb Kingston Value PC3200
chipset = Winbond BH5
Vdimm applied = 2.8 V
1T OR 2T = 1T
system = Pentium 4 2.4C @ 3.4Ghz

here is mine.. waiting for someone with ocz tccd ram to come in

RAM = Corsair 3200XLPT 512mb x 2
chipset = Samsung TCCD
Vdimm applied = 2.9V
system = Pentium 4 3.0 at 3.9Ghz

dinster, i think u should seperate Pentium 4 socket 478 with the LGA 775

RAM = 2x 256MB Kingston ValueRAM PC2700
Chipset = Winbond BH-6 [Week 42, Year 02]
Vdimm applied = 3.6v
1T OR 2T = 1T
System = S939 Athlon64 3000+


Attached thumbnail(s)

sorry but i think no need to seperate bcoz the arhitecture is quite similar..

but there will be new section soon.. it's Pentium 64

welcome to the club

lol between p4 and athlon 64bit so many different
i'll try to oc my ram more soon....have to get ram heat spreader 1st

This post has been edited by fatalynx05: May 12 2005, 09:03 AM

here's mine.

RAM = 2x512mb Kingston Value Ram PC3200
chipset = BTD43
Vdimm applied = 2.8 V
1T OR 2T = CPC disabled
system = Pentim 4 HT


Attached thumbnail(s)

ram gua panas sial.....

got some question guys, does enabling PAT is good??

with 875 chipset its already enabled. AI7 mobo theres a method u can enable it with BH5 rams and 2-2-2 timings, i tried it and it works with one of the bios i think 17 or 18 cant remember for sure. use ctiaw to check for sure. dunno if it works with your mobo. but it believe it does stress your ram.

RAM = KVR DDR400 512mb x 2
chipset = BT - D43
Vdimm applied = 2.8v
system = Pentium 4 2.8 @ 3.22




Attached thumbnail(s)

i got turbo/street racer/f1 on my setting, which one should i choose?? and PAT is only enable on 1:1 divider is it??

above 3.3 vdimm = active cooling is a MUST

RAM: OEM PC3200
chipset: infineon chip
vdimm: 2.6v
2-2-2-11@2T@226MHz
system: Athlon XP




Attached thumbnail(s)

heat spreader WONT help OCing.. !

active cooling yes..

RAM = 2x256mb DDR OCZ PLTD DC PC3500
chipset = Winbond BH5 (dunno generation)
Vdimm applied = 3.8 V (according to DDR Booster
1T OR 2T = 1
system = Athlon 64






This post has been edited by antonio_zth: May 13 2005, 05:00 PM

new here hehe... tried this sandra thing n it seems that w/o DC it just sux....

added:

RAM= Corsair VS DDR400 512MB
chipset = no idea.. can someone help me here??
Vdimm applied = default... (2.5v?)
FSB = 225@2-3-3-6 1T
CPU= AMD64 3000+ (939)

This post has been edited by jsnkok: May 14 2005, 10:18 AM

Where is Bwan?? I want to see his 270Mhz BH-5 scores.....

since Sandra cannot properly detect the memory timing on certain systems, new poster need to provide CPU-Z screenshot as well..

refer my 1st post for full info okay..

i wonder what happened to hynix users..
mostly winbond aje ~

where's TCCD users ?

hynix gua try cannot go....2.8,2.9,3.0,3.1v no effects after 265 if dun use dividers at 400mhz.....on 512 single chan...manage 35++ scores...does it mean dual chan is 7000?????

updates!



This post has been edited by antonio_zth: May 16 2005, 09:38 AM

do i need to create new benchmarking module for memory?

face problem when i click next at workgroup

this is mine on intel platform now will try higher later

RAM = 2x256MB PC2700 Hyundai Electronics
chipset = Hynix BT-J
Vdimm applied = 2.8 V
1T OR 2T = 2T
system = Pentium4 Notrhwood

This post has been edited by Asus: May 17 2005, 07:42 PM


Attached thumbnail(s)

jeng jeng jeng...as Dinster want me to help....

lets see what this baby can do.....












goin to burn in dulu after work....hoping 7.5k barrier....

This post has been edited by antonio_zth: May 17 2005, 10:43 AM

Asus,

what's the detail of this benchmark ?

use the template pls......

updated, sorry2 lupa

dinster...

dunno how will the rams perform...will be testing tommorow...give it sum burnin time...hahahahaha...

300 2 2 3 7 1:1 can ahh u think...

This post has been edited by antonio_zth: May 18 2005, 05:38 PM

After burn in for 12 hours , the best it could do was 257fsb at 3.5vdimm. But the PTS in sandra2005 is even lower than those Twinmos UTT in the ranking , around 6750. I will post up screenie once i'm satisfied with the RAM. hehehe....

lol that is the ocz value winbond utt
same as mine, i just received this morning

Dinster, please update my result

RAM = 1x512MB Kingston Value RAM PC3200
Chipset = Hynix DT-D43 505AA
VDIMM = 3.0V
CPC = ON (1T)
System = AMD Sempron 3000+ (S-754)


Attached thumbnail(s)

Alright , as dinster requested. Here is my OCZ VX Value :

Erm , no idea why the sandra2005 shows 2CMD. Bios shows 1T Timing , shouldn't it be 1CMD ?



Edited :

RAM = 2x512MB Ocz VX Value
chipset = UTT
Vdimm applied = 3.4V
1T OR 2T = 1T
system = AMD64

This post has been edited by winc87: May 19 2005, 02:39 AM

okie one more....


Edited :

RAM = 2x512MB Ocz VX Value
chipset = UTT
Vdimm applied = 3.6V
1T OR 2T = 1T
system = AMD64

This post has been edited by winc87: May 19 2005, 02:39 AM