didnt notice this thread...will post mine afterwards...still burning. nice going din for starting the thread...

yeah...mine is rated 2.5-4-4-8...from my reading and din's info...it's bh5 utt...and being UTT, i need to do the test on my own...probably ocz already tested this sticks and at 2.6v, they guarantee it can do DDR400@2.5-4-4-8...that's why they put the sticker that way...and i do believe that most utt owners know that this utt[C or B] stuff needs serious burn-in...still the the burn-in/testing phase...but i dun expect it to perform as good as the old BH5...the old school always rox

Remember (echo...just like obi-wan)...this is BH5 UTT...u never gonna what u gonna get (swithced to Forest Gump)...u might get the gem or the glass one...
always remember the UTT!

This post has been edited by remysix: Jun 13 2005, 11:09 AM

which databse bro...
this one ka??

try CAS3 la...if cannot then bh5 la kot...

hmmm...last time people look at the dimple to determin whether it is UTT or something else...but now since UTT is not a technology or chip code or something...it is used to differentiate bh from ch...hmmm...suda tukar la itu...but for me, be it bh or ch as long as it can perform damn well is enuff...just that bh utt cannot run on mobo with nf2 chipset...

but possibly not the case with ValueBH ...mine need hi-V to get to 250...but maybe in time it will become sorta 'bloated' with voltage, it'll need less...so...more burning ...yayaya...more burning

yeah...rite...maybe that fren of yours got the premium BH5...instead on this value bh5...mine is still struggling at 256@22210 with 3.4v...burning it again to get to lower vdimm or higher fsb at 3.5v or 3.6...and badly enuff, my mobo seems to be overvolt...set 3.6v in bios, reported 3.70v (in bios oso)...izzit coz of the psu???

This post has been edited by remysix: Jun 14 2005, 03:35 PM

same here...just finished 85 rounds of #5...260@DDR2228@3.6vdimm...having a deskfan blowing into the rig...already got 80mm on the sticks...will try to lower the timing...maybe to 2227 or 6...if ok...then bump extra mhz and back the timing to 22211...ok kalu...then lower down the timing again...22210->2228->2227->2227...that's how i did mine...havent got the guts to try 2225...will update later.
my fren antonio...ada baik ka

done...ran at 260@2225 last nite...but got around 18 errors after 4++ rounds of test 5...i think it coz of the heat...last nite i didnt use the deskfan...at 2227, no problemo...gonna try to push the mhz a bit now and see how...

hahahaha...din, i still want to play around with these babies...once confirm cannot go anymore, i'll post mine...malas nak tukar2 too many times...easier and better that way...btw din, mine vx value has the same P/N with the one that I've RMAed and same as antonio's as well, just the printed rated je yg different...like the same chips

send to bwan...he's in sabah/sarawak, rite???but for the sake of oc, it might worth it...

mine nampaknya stuck at 260...best can go 261 only...at 2225...but rather hi voltage...3.5v...burning some more if i could bring the voltage down to 3.4 or better 3.3v...

do they have a better performance chips to stop tccd and tcc5 prod?duh!the tccd surely will be the collection item like after this...hold on to it guys and sell them at 'head-cutting' price...muahaha

ya ya...s939 is the first amd mobo that comes with DC rite...that's why many want to migrate to s939 for amd...other than the 64-bit (future proof)...

luckily u didnt send for rma

the stick is damn good bro...DDR60+ at CAS2.5 with 2.73v only...not even 2.8 or 2.9...salute!!!

This post has been edited by remysix: Jun 23 2005, 12:01 PM

go for tight timing and hi binned ram la...if money is not an issue

waaaa...panas kat sini...maybe i need to rejoin the team...but with old hardware la... antonio, looking good nampak!

it's already 3 months since i got the sticks...tapi tak siap lagi memasak...
now testing/burning at 261@2225...hope to reach 265...then i'll re-post my marks.
last time dah post but all the sudden, missing from the list