that one my value vx

this one my bh-5


RAM = 2x512mb Corsair 3200LLv1.1 BH-5
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.5
1T OR 2T = 1T
system = A64 3500+
CPU speed = 2905mhz

i can do 270+ depending on bios.. wait till i change my bios first

just tested this 331 bios.. max i can go with this ram is 266mhz 3.6v

i'll change the bios and go for 270 next wish me luck

This post has been edited by babyelf: May 27 2005, 06:48 PM

nope.. my value vx from australia

got other timings also for A64..

and intel will give less bandwidth cause A64 memory controller is on the cpu itself.. instead of having to go thru the NB

other timings are in A64 tweaker in the picture





oh yea.. FYI value vx is using Winbond BH dies now instead of CH like last time.. so less voltage needed to achieve 2-2-2-5

This post has been edited by babyelf: May 28 2005, 02:59 AM

almost 8k already.. i change back to 310 bios later tonight


RAM = 2x512mb Corsair 3200LLv1.1 BH-5
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.5
1T OR 2T = 1T
system = A64 3500+
CPU speed = 265x11= 2922mhz


Attached thumbnail(s)

this bios won't let me do that
310 will.. haven't change back yet.. will do so soon

hopefully 310 will let me clock my proc higher as well.. cause i need the 11 multi

8k? hehe

RAM = 2x512mb Corsair 3200LLv1.1 BH-5
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.5
1T OR 2T = 1T
system = A64 3500+
CPU speed = 267*11=2937


Attached thumbnail(s)

which C2 is it?

check the revision number..

1.4 = BH-6
1.5 = BH-5
4.2 = TCCD revF
4.3 = TCCD or TCC5

http://www.houseofhelp.com/forums/showthre...0&highlight=UTT

might be for new modules only

how long ago did he get them? it could be old modules.. cause corsair ram is not only identified thru the revision number.. but thru the batch number as well.. newer modules only use bh-6 i think..

and 3200 normal ones.. not C2.. 1.6 uses BH dies also.. singapore sim lim Sq selling them.. somebody just bought them

i duno.. i'll ask for ya.. those should be cheaper than C2..

rg470.. did u just get ur corsair? check the revision number

5.1 is mosel chips.. =/

they don't overclock well

nice scores

heh.. time to change bios

This post has been edited by babyelf: Jun 8 2005, 11:34 PM

hehe.. venice coming in 2 days

maybe tonight i flash to bios 310.. this one i hit the wall already with my bh-5.. now using 331-2

maybe 270x11 ?

This post has been edited by babyelf: Jun 9 2005, 11:24 AM

haha haven't come la that one in my sig... all coming sama sama

officially dispatched.. will reach tomorrow

u have to check the revision number.. i think the ones u saw are not C2.. the C2 runs at 2.5-3-3-7 rated for amd systems and 2-3-3-7 for intel..

what board will u be looking at buying?

2x256 BH-5 performs better than 2x512mb simple because they are single sided.. it allows better overclockability..

if u can get the value vx.. get them.. they are good stuff

gsan.. my 2x512mb bh-5 will go to 270 with 3.5-3.6v

i played CSS at those speeds as well for about 30min before i get error.. so yea.. at those speeds i can bench i'm sure.. i think i can go higher.. but haven't tried it..

single sided usually goes up to 270-280 with about 3.6v for good pairs..

jslut.. 3.5v 250 is really really bad for old bh-5 already..

rzonealley.. yea new modules are hard to say.. i still prefer older modules.. my bh-5 never failed me my value vx in the other hand is not bad as well.. altho it didn't go as high as my bh-5

This post has been edited by babyelf: Jun 12 2005, 10:22 AM

gsan.. for urs it's a different case i think.. on nf2 platform it doesn't do as well as on the A64 platform..

nf2 u need to turn up the VNB to get it running higher.. i'll keep those sticks for now if i were u.. don't sell it.. i'm lucky to have gotten mine 2nd pretty cheap..

rzonealley.. yea i'm really lucky to have gotten this one.. really a nice pair i have here.. i'm sure urs will do the same
if i can get a pair of G.Skill later on might let my bh-5 rest for a while..

yep northbridge .. get a DMM la lol..

rzone.. so u got the twinmos eh?