RAM = 2x256mb Kingston Value Ram
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.6 V
system = Athlon64 s939

dinster , mine is 1T in bios. But sandra2005 shows 2T ?

After burn in for 12 hours , the best it could do was 257fsb at 3.5vdimm. But the PTS in sandra2005 is even lower than those Twinmos UTT in the ranking , around 6750. I will post up screenie once i'm satisfied with the RAM. hehehe....

Alright , as dinster requested. Here is my OCZ VX Value :

Erm , no idea why the sandra2005 shows 2CMD. Bios shows 1T Timing , shouldn't it be 1CMD ?



Edited :

RAM = 2x512MB Ocz VX Value
chipset = UTT
Vdimm applied = 3.4V
1T OR 2T = 1T
system = AMD64

This post has been edited by winc87: May 19 2005, 02:39 AM

okie one more....


Edited :

RAM = 2x512MB Ocz VX Value
chipset = UTT
Vdimm applied = 3.6V
1T OR 2T = 1T
system = AMD64

This post has been edited by winc87: May 19 2005, 02:39 AM

Oh ya dinster , maybe you should list out the CPU clock speed as it affects the memory score in sandra2005 for AMD64.

FYI , the timing is 2-2-2-6.

edited : Where are the other OCZ VX Value users ? Eager to see their results.

This post has been edited by winc87: May 19 2005, 12:03 PM

your ram cannot do 2-2-2-6 ?

Yes you should feed it with 3.3vdimm to push further.

kianwee , why didnt you join the ranking huh ?

ray99mond : Your tccd cannot goes higher ?

In AMD64, the clock speed must be concerned in the memory bandwidth too. The faster the clock speed, the higher the memory bandwidth.

FYI, using all three slots will run in Dual Channel.