Nice bro, way to go.. cant wait to see the results

Question:
My Q6600 currently is running at 400x8 @ 1.375v.
When I run Prime95 for Small FFTs, it brings no error for half an hour.
But when I run the Blend test, the error comes out in 5 minutes like that.
Roughly what can cause error like that?

My setup is:
Q6600 @ 400x8 @ 1.375v
Corsair XMS2 @ 5-5-5-15 @ 400x2.0 @ 1.8v
GA-G31M-ES2L
CM Extreme Power 500w

I don't plan to go for further overclocking, so I guess my rig suppose to be enough already.

due to the mobo chipset, u should OC by multiplier 9x356fsb.
if your ram is 4gb kit, mayb u need to increase the vcore to 2v

---

Added on February 23, 2009, 5:31 pmmodular psu does help in cable management and a good modular psu will not have bad rail compare to a non modular psu.
btw, i have use cm extreme 380w psu before it really suck in +12v rail. but it does run vr stable for half year or more 24/7 usage, even pair with hd3850 and x1950xt

This post has been edited by hengmy: Feb 23 2009, 05:31 PM

elop BRoss...

this is my oc resuLt..

im stiLL newbie in OCing..

do coMMent yah..

my spec is 4gb ram qx6800 wc setuP...

That's not even a truepower psu to start with, that explains the sucky-ness of the psu.

Nice clock for 1.5v vcore, how much is the load temps and what hsf did u you use to cool this beast ?

the load temp was sated in the everest bro very nice temps for 1.5v!! air.conditioned room is it?

under water cooling setup as he stated before

ah alamak.sry didnt read the whole one. i wonder how much i can OC my q9550 with CCF.still waiting for them.will post ss once got chance to play with the proc.

CPU : C2Q Q6600
CPU clockspeed : 3.8 Ghz
Motherboard : DFI DK P45 T2RS Plus
RAM model : Crucial Ballistix DDR2 800
RAM capacity : 2GB X 2
RAM speed : 450 Mhz , 5-5-5-15
RAM mode : Dual channel
Cooler : Custom WC
Time: 13.437s


Attached thumbnail(s)

why not true power??

mine is gigabyte odin lor..

im using water cOOling setuP...

---

Added on February 26, 2009, 2:53 amurm...

not so bro coz i dont open my aircon yeT..

hehehe...

mb my rOOm is coLd...

---

Added on February 26, 2009, 2:56 amhows ur sisteM??

steadY ar bro??

This post has been edited by hELLsPeRm: Feb 26 2009, 02:56 AM

about the psu i was referring to hengmy

system steady

aiya uzairi... seems like i dont have to treat u makan since roll back ... later create my own template

i am not saying that is a true power psu, but just sharing the experience when using that psu, since evoangel is using that psu.
i am saying modular have strong +12v rail as non modular, for sure i am saying when both were true power PSU.
what is the point comparing a proton with BMW

lol

nvm u just bring me on lunch time can get the value meal cheaper

modular would have weaker 12V rails because of the interconnects, result based on same model of tier 1 psu.

owH..

my baD...

hehehe...

Just wana ask,
Among the E8400, E8500 and E8600,
which one is the best to overclock?
uhm, I would like to little overclock on stock voltage,
means like which one the best to clock or go to best speed at stock voltage?

and which among them have the best temperature?
I am thinking to move from Q6600 back to E8X00...

of cos e8600 is better among the other 2... but y u wan change from q6600 to e8x00??? its such a waste if u plan jz to overclock... 3.6ghz on q6600 is good enuf liao... i'd rather go for 3.6ghz q6600 than a 4ghz e8600...

I think better if u stay with the q6600, oc it a bit would do.

Btw latter is the best among the group.

im sure he want a power efficient proc thats why he ask for the best overclockable proc on stock voltage.

and a 3.6ghz Q6600 use a lot of power.

Not that much of power, mine 3.6ghz load + hd4850 725/1125 load topped out at 388w only.