What mobo ure using now ? Manufacturer usually have their own software for their mobo.. for generic use, u can try hwmonitor or everest.

not all mobo can show those voltage in software. eg p5q deluxe canot

This post has been edited by hengmy: Feb 15 2009, 09:50 PM

Aside from using those softwares, the best thing is to view those voltages in bios.

if there's error poping out from superpi hyperpi, does that means the ram is faulty or the c2q die(strating to show faulty symptoms)?
error such as not exact in round from super pi.

Its either the ram or the proc, showing instability under stress.

Still it's rare to get instability if the proc are in stock speed and ram under it's default timing.

uzairi and heng.. woot! i took ur advise to set ratio to 1:1.. pass occt! super PI 1mb 17seconds.. nice!

stock vcore,vdimm 2v =)

if u are using window vista, there might be some incompatible issue with super PI.
mostly the problem due to the ram, eg a rated 1066mhz ram canot stable due to difference strap setting.

---

Added on February 16, 2009, 12:49 amgrad to hear that

This post has been edited by hengmy: Feb 16 2009, 12:49 AM

glad to hear that bro.. so now try and clock the proc slowly

erm.. i think wait i get my new psu end of this month first.. aas u say now my psu is like a time bomb.. =p dun wan later xplode inside my cm690.. =)

haiz.. shud have plan earlier to get better psu... now rgret for not thinking ahead... =(

im using p5q3 rite now

everest dun show, lemme try hwmonitor

ya correct also, go get a new psu then only crank the clockspeed.

Like what hengmy said, there's a probability that it wont work with ur mobo :|

well, looks like my mobo is not compatible with hwmonitor... but thanks to that, i decided to manually set my pll, vtt and nb voltage... and now my temp is less than 65c load, as compared to last time 71c load ...

placed pll value to 1.6 if not mistaken, vtt 1.2 and nb 1.2 or 1.3v cant remember,

which 1 is the one causing high temp for proc ya? izzit vtt?

your vcore

this is mine

vcore - 1.45v
pll - 1.55v
vnb - 1.27v
vtt - 1.21v

my vcore before tweaking pll, vnb and vtt = 1.175
load temp 71c

after tweak pll,vnb,vtt, i reduce the vcore by 1 step, to 1.168

a drop in 0.01v make 5c difference???!!!

Stock vcore and stock cooling ?

Your temps also depends on the ambient temp and case temp too.

i guess i better mention my specs and so on

q9650 with ifx-14

my ambient temp is around 25~27c, case (system temp) rite now is 47c =.="

i tried 3.6ghz with 1.16v, so far stable...

now trying to go 4ghz stable with as low voltage settings as possible hahaha

ifx14

your case temp is quite high, try to open the side panel and see if there's any improvements.

this is mine

q6600 with custom water cooling set

3.6ghz 1.45v linx stable load 80/74/80/74 with orthos priority 9 stress test at 11.55pm.

3.8ghz 1.55v linx stable load 82/77/77/82 with orthos priority 9 stress test at 2.24am.

This post has been edited by uzairi: Feb 16 2009, 03:22 PM

wow uzairi ur system rocks!.. sighs no one wan buy my current psu now.. guess i have to buang it then buy new one.. =( waste money lor.. lol

its true on hand is really difrent form reading only.. i've been reading a lot of forums/oc guides.. now kelam kabut oso.. haha

---

Added on February 16, 2009, 1:11 pmlol.. now another problem haiz...

BSOD= saying memory dump bla bla bla... wtf?

i go back to bios and put LOAD OPTIMIZED default ba... =(

This post has been edited by evoangel: Feb 16 2009, 01:11 PM

Some pics for you

3.6ghz and 3.8ghz orthos stable...


Attached thumbnail(s)