is orthos and occt stable does it really stable ar?? y i get bsod even i test my rig stableness? lol

You mean after ORTHOS and OCCT for few hours without warning/error you still get BSoD randomly when its not stressing or while gaming?

yes... izzit some vista problem? bcoz it cache a lot of my memory.. so funny.. and my bsod problem is something like memory dump...bla bla..

---

Added on February 16, 2009, 8:18 pmi think i know my problem.. i check my task manager and i notice when i restart my pc the TOTAL memory is dropping so much.. until left 100++ only.. lol wat is happening? maybe this is the main problem i get bsod? memory dump..

This post has been edited by evoangel: Feb 16 2009, 08:18 PM

wohh.... at 1.45v, ur temp reli high

my q6600 with z600 stress oso get 78/78/73/73

but ur 3.8ghz at 1.55, i couldn't pass the stress test

What's using ur ram soo much ? Check it at task manager...

task is normal.. nothing eating much rams,.. but i need to know wats the main problem for memory dump error? hmmm

a fren of mine said the posibility shud be my hdd... its the oldest thing in my rig.. PATA hdd.. i used to had some problems wif dat hdd last time.. but suddenly ok already.. so i tot its stable to use,..

You can try Ariolic Disk Scanner 1.2 to check if your hdd is having lots of bad sector or not.

http://www.ariolic.com/disk-scanner.html

and my ram timing is 5-5-515 @2.0v.. is dat consider safe? kinston hyper x 2x2gb 1066mhz.. i think dats the default timing i shud use..

if i need cpu dram ratio 1:1.. i need to clock the ram back to 800mhz rite? bcoz currently im using 7.5x400bus speed... lol.. im lost again haiz..

and another thing is i just install my vista ultimate today. previously was using xp wif NO PROBLEM on the free/available memory.. and yes this vista is pasar malam rm10 rinnggit stuff... =p

---

Added on February 17, 2009, 2:23 amand hey.. i just check on google and even my gf's lappy.. i notice its the same problem occur.. y the hell vista eat all the memory?? i dun understand.. but my gf's lapppy doesnt have bsod lor.. aiyo...

This post has been edited by evoangel: Feb 17 2009, 02:23 AM

vista dun eat all memory... instead they cache it... i would say thanks to this caching, opening applications seems faster to me in vista than xp

btw, u dun reli have to clock ur hyperx to 800mhz if u wan 1:1, and honestly i dun reli care bout 1:1, its not like the ram will always perform at maximum speed

a 1066mhz ram with 1600fsb is faster than 1600fsb with 800mhz ram, keep that in mind ... dun worry bout those bottlenecking shits

added: it seems might be getting bsod due to insufficient vdimm.. i thought hyperx 1066 is 5-5-5-15 @ 2.1v?

try pumping to 2.1v or 2.2v

This post has been edited by iBenQ: Feb 17 2009, 02:36 AM

oh.. u really mean this caching thingy is NORMAL?? phew.. sigh of relief.. i tot is some sort of stupid error lor.. but how bout my bsod? overclock problem? occt pass like flying colors.. lol.. 3dmark 10k points..

its random like shit.. this afternoon got 3 times.. but now dun have.. and the funny thing is i only get bsod when surfing and doing light applications.. i play Far Cry for an hour no problem wor.. damn funny lor.. lol

go to system properties, go to advance system settings, go to startup and recovery settings, untick the "automatically restart" checkbox

the next time u got urself a bsod, jot down the code and error message

otherwise it'll be hard to find the cause of ur bsod just by telling me ur settings...

first, try to open lots of application that uses alot of ram, if u get a bsod cos of this, it could be ram problem

what mobo u use???

sometimes i got that problem and the cause is the oc setting wasnt applied.

i oc my e8400 to 400x9 but when i 1st start the computer the setting wasnt applied and the com either hang or bsod and only a quick shutdown and a start will cure it.

i dont really know what cause it.

gigabyte ep43-ud3l.. well i actually bouhgt a new hdd now.. already install vista.. set vdimm to 2.2v.. 5-5-5-15 timing.. so i guess its no problem for now lor..

hopefully.. finger crossed.. =(

Buy psu first

Then u can clock like there's no tomorrow

i agree with mr.uzairi... buy a good PSU 1st... then u will only know ur hardware limits.

yeah.. i conclude the problem is PSU!! damn.. i put back to load optimized defaults in bios wif disable EIST n C1E.. now testing still havent bsod..
so my psu is really suk.. haiz... spend rm130 for my hdd.. T.T

at first i tot upgrading my pc wif buying parts only.. but now.. almost like buying the whole rig.... aarrghhhh...im going nuts already... LOL

and somemore i promise to buy uzairi mcdonalds.. rm10 liao.. =p

lold

dont worry man, the mcd part anytime also can

promise is a promise.. =p i will buy u mcdonalds.. where u stay anyway?

hmm now choosing between 520w CM modular.. or.. Silverstone 560w?? still thinking.. =p

well update for today is... my pc havent restarted yet wif default bios.. so i think i will kick my psu ass for causing much trouble.. LOL

LOL

Im from cyberjaya.

Btw i suggest that u take non modular psu because modular psu have lower rails because of the modular interconnects.

yea i agreed too.. modular only looks COOL!!!! haha.. im getting my st560w soon.. my bank already dry up.. =(