owikh.. what he said, i was about to say the same. equilibrium reached.

Same thing happened with my rig, i used to have 1x240mm... then 2x240mm... then I switched to 1x240mm + 1x120mm.. all yielding same result via the same block.

---

Added on August 12, 2010, 3:56 pmI think a lot of ppl gave u good suggestions already

But yeah, it looks like ur 8pin is a bit short. get extender or if u like a challenge and make things look nicer, extender the wires yourself and sleeve the PSU.. and then route them like how everyone suggested... FTW!!! memang chun after that...

This post has been edited by kencjl: Aug 12 2010, 03:56 PM

Bro,wnt to try d supreme hf ?

No thanks. Looking for a new one & will keep the XT forever

---

Added on August 12, 2010, 7:14 pmBeware when using extension cable might cause power ripple

This post has been edited by owikh84: Aug 12 2010, 07:14 PM

Bt i dun knw xt perf la..last time i do review xt and supreme xf almost same.

Hello I'm New Here. I got a GTX480 (OverHeat) Problem. How much i need to spend to solve the problem? Please suggest the lowest price and effective one.

http://forum.lowyat.net/topic/247078

owikh what is the sign if power ripple?
i mean can effect psu?..stability?..psu got sound?

unstable power might damage parts.
Some may find their +3.3V dropped to +2.5v

daxzero
pretty doesn't mean good
somethg to share LINK

want to silver plate the XT?? acrylic top ker??
wahha



worth a gamble imo since ur 8pin tak cukup panjang .. test with voltmeter dulu before using ..

This post has been edited by reiben05: Aug 12 2010, 10:38 PM

hmm personally i would rate the 1.2kw psu's the following

1.AX1200 (Price RM1200 etc )
2.Antec TPQ/EVGA SR2 ( RM900/1.1k)
3.CM 1200 GOld ( slight ripple suppression but not as bad as the seasonic OEM's)(RM900)
4.Seasonic X-1200 (hmm theres a ripple suppression issue)( Should be same price as CM.. plus point on this over CM is molex connectors and FULLy modular)

ok ripple suppression on Seasonic X series , CM GOld, GX etc
one thing ppl forget the test was conducted on a oscilloscope with a loading machine.
With mobo PWM's etc itself also provide suppression. Just that with the AX1200 and powercache tech on Antec/EVGA u dont tax the mobo as much.

Extension plugs with ripple suppression is a myth or more like negligible
if this such a concern modular cables provide twice the resistance in length as fixed cables.

but seriously all this 4 psu's are good.

will post later next week
pics of CM1200 , Antec TPQ OC and AX1200 which corsair sending me next week.

actually interested in Antec TPQ OC

Single rail design vs Virtual Rail design.. ( u Can actually disable the virtual rails manually to make it single rail)
i always wished manufacturers gave this option


This post has been edited by cstkl1: Aug 13 2010, 01:13 AM

download rivatuner and set the fan speed as 100% and check the box so that it will run at 100% fan speed each startup, its free but it will be noisy...

thx cstkl1 for nice info
have answer some of my doubt now..

btw take the flextronic ax1200 result on johnny guru with a pinch of salt.
untill reviewers actually start testing retail units off the shelves

corsair is known to give handpick review units or lol screened units on all the products to reviewers

also hmm with their pricing of cudo

worldwide most psu's now are going at RM0.70 per watt for high end

malaysia around RM0.80 for the high end ones

ax1200 price already been released by cudo. its around the 1200 mark.
seriously ridiculous.


This post has been edited by cstkl1: Aug 13 2010, 01:27 AM

which one should i change 1st
change to 360 rad or change mcp655-B pump??
which one give better result?
single loop for cpu onli...

selfdz87
change ur rad + good fan...

another cheaper alternative is to use a push and pull config...

Nice!
Recall this SilverStone ZM1200M +12V rail can be converted from 6 to single. It is expensive though don't think Inter Asia is still carrying this model..