so ah_khoo, hows ur test with prime95 regarding the tFAW set to 30?

At the end of January AMD company presented the processor series phenom II X2 5xx, combining two core 3 mb cache in the third level.

Associate reports that AMD plans to release in the second quarter the model phenom II X2 560 (3.3 GHz), and in the third quarter AMD will present the processor phenom II X2 565 (3.4 GHz). The dual core processors phenom II X2 on their frequency potential will overtake Phenom II X4. The new models phenom II X2 will be based on C3 stepping, which brought the support of energy state C1 E and slightly improved frequency potential. The cost of phenom II X2 560/565 processors will be around $100.

using ati gpu? i notice latest driver tend to crash..

everyone play with s3x core

this is the new that sound interesting


http://xtreview.com/addcomment-id-11524-vi...-II-X2-560.html

yup, noticed that too... play dirt 1 oso crash... sheeesshhh... 
not everyone leh sis... me don't have d chance oso... my fren managed 2 nites only... 

newer unlockable goodies... why not they use crippled x6 die for these luvly x2... then we can have buy 2 get 4(up to) free...     

try stressing it la n see if its fine. have try stressing it using the in-place large fft option, n change the option " time to run each fft size(in minutes )" from 15 to 1 minute

the default speed is higher than 1055T?
this for oem only right..

everyone play with s3x core

this is the new that sound interesting


http://xtreview.com/addcomment-id-11524-vi...-II-X2-560.html

I ran the test. The temps are around 52-53 max. I ran it for around 5 minutes only. The temps are quite low maybe because it's raining now (: Going to 19x later!

---

Added on July 7, 2010, 7:55 pmI tried to go to x19. After booting to windows, opened cpu-z,hwmonitor, amd overdrive and prime95 instantly and my pc restarted..so should i increase my voltage? I guess 3.8GHz should be my last oc

hi guys
is this OC a good one?

or can improve

i'm using 800mhz andi didnt use 667mhz(333mhz) to start my RAM overclocking
jst start from 400mhz directly wif the timing shown in the picture

i try to put down to 333mhz, but i cant exceed 260mhz cpu clock

duno y

i use
x10
x3  ( reduce my MB temp ?! )

p/s : CPU temp jst fine, it never exceed 58'c, using CM hyper 212 +
please advise 

Yes increase voltage

so ah_khoo, hows ur test with prime95 regarding the tFAW set to 30?

hi guys
is this OC a good one?

or can improve

i'm using 800mhz andi didnt use 667mhz(333mhz) to start my RAM overclocking
jst start from 400mhz directly wif the timing shown in the picture

i try to put down to 333mhz, but i cant exceed 260mhz cpu clock

duno y

i use
x10
x3  ( reduce my MB temp ?! )

p/s : CPU temp jst fine, it never exceed 58'c, using CM hyper 212 +
please advise 

Before making any voltage increment, you can always check what is on the edge and lower down the divider.

It is not always to play w voltage.
3 cents here.

-pWs-

just asked my fren tried lastnite, tFAW = 30 gave instant reboot...