since i asking in OC tered..that is y..
kvr performance in quite known edi...
wud like to try other ram.. must not be Hp only..but not KVR la..kekeke

with limited budget, that is y im not aiming for any 4gb kit..kekeke..

Me lucky? If i'm lucky i would be using the X6 1090T already lor :/cry: :/cry:  :/sweat:

i not sure what comment is this.. not helping any..

multiplier often referred to cpu multiply to fsb.. to get cpu speed..
divider normally is for fsb:ram bus ratio..

let's think of this normal circumstances.. the ratio would be..
1:2 where 200:400
200 = cpu fsb
400 = ram <-- this is where the ram can achieve 800mhz becoz of ddr u need to multiply to 2..

what if we raise the fsb to 290 by using that ratio (DIVIDER)?
it can be..
(290 x 2)/1 = 580 thus 1160mhz.. can ur ram withstand this condition?

so lower that ratio might HELP.. shall i calculate..
200:333
what the hell is this.. how i calculate my ram if i were to raised my fsb..
200:333 is equal to 3/5 how?

200/333 ~ 0.6 = 6/10 = 3/5 = 3:5

so if the fsb is 250 the ram speed would be
(250 x 5)/3 = 417 ~ 833mhz..

and not only that.. u need to play with the voltage and the advance timings..

newer amd phenom architecture using dram multilplier.
older amd athlon architecture using dram divider.

Oc is not for fun and it is a must bro.

-pWs-

windsy f2 aint really a clocker, i've tried few, most topped @ 2.5~2.6GHz only. u got a nice pair of ram there bro... 

http://s.lowyat.net/uploads//attach-21/pos...-1202649083.jpg

thanks man, crucial blisti tracer is nice  :/blush:
and too sad that i get F2  :/blush:

however
i'm using 9x now for more OC :/drool:
i think can be + more mhz  :/)
check this picture and give some advise please,sifus  :/drool:  :/drool:

is 9.5 cannot?

I'm aware that I may accidentally goreng my chip if I did something wrong...so I guess I will pass...at least for now

i'm not so sure half multi still affects ram freq (run @ lower frequency than what bein show on cpu-z), but it has been a habit to avoid half multis since d gud old days of a64. 

consider yaself lucky to fry a chip w/ that kinda volt... 

amd chips can take massive amount of volt... 

http://forum.lowyat.net/index.php?act=Atta...post&id=1302592

thanks man, crucial blisti tracer is nice 

beware with it.. degrade too fast

some board have 1,2,3,4,5,6 or what ever should refer to..
1- 400 (1:1)
2- 667 (3:5)
3- 800 (1:2)
4- 1066 (3:8)
5- 1333 (3:10)
6- 1600 (1:4)

what ever it is... it's still came from that fraction..
1- 1
2- 1.67
3- 2
4- 2.67
5- 3.33
6- 4

crazy jargon same like fsb and htt..
so just multiply that value with fsb will get the ram speed (don't forget to multiply by 2 for ddr)
easier isn't it.. but lost the concept..

Crucial Ballistix Tracers are good.....I suspect its the LED that causes its short lifespan ~_~
Its darn hot.....

anyway, 1 thing i dislike bout AMD is that u cant OC by too much compared to the stock speed .
but they give u high clock even at stock 

yalo, always heard about people say rma this ram.
looks like adding led in ram is still not a good idea.