Its rock!

---

Added on July 12, 2010, 2:59 pmWhat is your target core speed?

Most chips are acheivable at 3500 MHz core speed without increase in Vcore. Using original heat sink can acheived 3710Mhz core speed with 1.3875vcore and keep the temperature below 60 deg C in an air con enviroment.

What is your setting in bios?

This post has been edited by louislkw: Jul 12 2010, 02:59 PM

Have u tried updating the bios? Last time when i was using my old Gigabyte certain bios rev does help oc..

ya, I have updated to latest bios.
will try to increase Vdimm gradually at stock speed (1333MHz) and test the stability

---

Added on July 12, 2010, 5:41 pmUpdate: I tried to adjust the timing of my Ram close to stock speed, at last my proc can adjusted more than 3500MHz after timing adjustment

This post has been edited by kimurastanley: Jul 12 2010, 05:41 PM

hm.....so it is memory timing problem?

This post has been edited by InfiniteX: Jul 12 2010, 05:54 PM

What ram are u using btw? Regular Kingston KVR?
When trying to see what's the highest HT@FSB ur mobo can go it is good to let the ram timings at a lax timing so that u can easily pinpoint the reasons of any instabilities
My KVR with elpida chips so far i was able to take it to around 14xxmhz at a lax timing of 24-8-8-8, what timings are u running urs?

ya, so far my system is stable under stress test

Thats why i told you you have to set all of it Manually as if set to Auto it just set like no one issue.. - -

Ya, kingston value ram.. now it runs at 22-8-8-8 stablely

---

Added on July 12, 2010, 8:32 pmya, true..
that solve my problem

This post has been edited by kimurastanley: Jul 12 2010, 08:32 PM

this pair is really pocket frenly.. rm290 total.. even KVR selling at 150++ and i know tweaking KVR will be sucks..

1600mhz not sighted anywhere.. Sg selling how much there unker?
mebbe i settle with these rams only... with my current salary, i might have stop OC..

RM290 is a steal for a pair of ram which capable of ~15xx @ 7-8-7...

dun mentioned bout price in sg, almost everything is pricier than mesia ALOT... specially ahsos boards...

1600 goin @ $159 promo price, imagine if normal price...

w/ my current piles of debt, i'm considered dead lucky to have a x2 4400+ & 690g...

considering the average wage over there is far higher compared to here, that 159$ is ok right..

these module kindda hot.. near to tracer.. so i afraid to put more vdimm..last time 1.8v still not sked.. now only limit myself for 1.7v.. later need hang fan there and push further..i hope can la.

Huhuhuhu, same here, with the amount of debt i'm collecting, its lucky that i'm able to use my KVR at all..
Wish i can play2 with new value rams like Gskill or Team elite like kunta is playing

Kasi gantung satu kipas 60mm atas ram lah bro

my pay only < $2500, minus cpf minus payin debts minus bills, i only got $3xx for d whole month, if i buy some more i dont need to eat for half month ledi... even if i can starve for half month, i still can't use d elite 1600 on my 690g, can i?

ekkkk... it depends on how bad u want d item bro, if u really want it badly, u still can squeeze out d $$$ from somewhere...

senang aje, kalu panas, tuangkan air... hilanglah kepanasan...

This post has been edited by ah_khoo: Jul 13 2010, 11:42 AM

I've tested my RMAed ballistix tracer DDR2 PC-6400

Not bad the chips, can run DDR1066 at 2.1v but its freaking hot.....
I think too hot until Windows suddenly hang hahaha
Definitely need a blowing fan on top of it. Screw the LEDs man, make it generate more heat only

Micron D9s that runs at >2.1v is advisable to put fan on top of the modules to help cool the ram operating temp and increase lifespan

As an ex-user of those bling2 Crucial Ballistix Tracers i can vouch for their performance, n i just love the black on bling2 look of the ram's..
Tho never run them at 1066mhz speed tho only 1000mhz at 2.0v
When i move to DDR3 wish to get their new bling-bling DDR3 too but alas no budget their value line plak looks like no one is bringing them in

80mm fan ngam2 can be hanged using the mobo/ casing hole..
need to find some bling2 fan 1st..kekeke..all left is black fan only

i rather dip em.. more efficient..kekkeke

u know how hot it is...my team elite is abit lower only..so afraid to push more

btw i think that tracer able to run 1066mhz cl5 / 800mhz cl4 with 1.9vdimm perfectly fine..
i strongly think la..mebbe ur ram cannot..

---

Added on July 13, 2010, 12:00 pmyeah..that ram kindda suck is want to "OC" it.. i think last time max i can go is around 1020mhz...but not using 1066 divider..

if using 1066 divider, kacang2 can do 1066mhz.. no alter anything else..
kalau saya tidak silap, saya ada run 4sticks 1066mhz..kalau xsilap la..

This post has been edited by kuntawakaw: Jul 13 2010, 12:00 PM

u all org kaye2, i was usin twinmos value only back then...

This post has been edited by ah_khoo: Jul 13 2010, 12:19 PM

Don't say like that bro, itu twinmos ram is a special case, performance wise it blows our bling2 ram to kingdom come