Khoo Sir, you are here... Spotted..

maybe the kingston DDR3 1333 value ram prevent the base clock go further than 250mhz.
i also have kingston DDR2 800 value ram that prevent my pc base clock go beyond 265mhz.

u change ur ram then??

New member here.. good day everyone..

Back to AMD camp,

Here is my result for x6 1055t,





This 2 sticks of ram CMI , waiting for new ram arrive.

nice, what is ur hardware configuration??

Hardware configuration? Set up is it?

My Rig,

CPU - AMD 1055t
MB - Asus CHIV
RAM - Patriot AMD Black Edition <-- thrash it and dump it, waiting G Skill Flare PC16000 7-9-7-24
Graphic Card - Sapphire HD5850 VX OC 850/1300

CPU is water-cooled by EK Supreme HF

This post has been edited by louislkw: Jul 11 2010, 10:18 PM

It is indeed quite strange to see that your processor cannot pass 250..

Why i sense the motherboard is holding back?

Now lets see..Can tell me whether u are using IGP or Graphic card?

What PSU u are using?

And i suggest you set the vCore manually maybe at 1.35V..this volts enough to reach 3.7 at least..yours 1.45 too high already.

My MB is Gigabyte 880GM-UD2H

Using IGP now. Havent bought GC yet
PSU Silverstone ST50F
Thanks, I have set my Vcore to stock value edi

---

Added on July 11, 2010, 10:18 pmYaya, setup

This post has been edited by kimurastanley: Jul 11 2010, 10:18 PM

Why everest showed different temperature between CPU and CPU #1, #2 etc??
My target temperature is less than 55 C, which one should i refer to??

Always refer to CPU temperature instead of core temperature.

51 deg C quite high, under 100% load?

This post has been edited by louislkw: Jul 11 2010, 10:37 PM

haha, i didn't change la, just stop overclock la.

i tested again.. My system only stable at 248MHz FSB. More than that will crash.. using integrated display now, but i wonder this will affect the OC

Any sifu can help.. my MB gt problem, or my proc??

Yes..IGP really holding back the processor..i Suggest you LEND ur fren GC first and see if it really IGP culprit..but most of the time yes becos that processor is quite impossible to not reach 3.8Ghz..at least..

Or maybe you should buy aftermarket cooler .

ok, i will try to install a GC and see how. Thx

IGP really hold back the OC eh....
Means mine is lucky can hit 300Mhz HTT

we all noe my proc max safe CPU volt under air colling would be 1.44-1.5v, but how bout the CPU NB max safe voltage? any1 noes? i dunwan to burn my mobo, currently stabilizing OC of 3.9Ghz with 1.3v CPU NB..

hey, is the IGP clock got relation with the base clock?

ok, i try to install 7600GS and latest driver, result still the same..
crashes at FSB 250MHz.. decrease multi so that it run near 2800MHz, other settings are all changed near to stock value.

CPU temperature always around 55, i dun think is temperature issue..

I dunno what happen to my rig, disappointed

Learn to set the ur cpu volt and vdimm manually also, using auto is not a good thing to do coz they always put more volt than it really need
Getting ur cpu up to 3.4ghz using stock HSF is already good for me, if u wanna push more please oh please invest on a better cooler

A few guys in here already tested ocing when using IGP and all of them find that u will face some bottlenecking issue compared to when on a discret GPU, that may also be the reason

---

Added on July 12, 2010, 1:26 amCan u give a shot of ur casing internal? Maybe ur pwm's is screaming from lack of cooling from bad airflow

---

Added on July 12, 2010, 1:27 amOooo nice setup there bro, really jealous

This post has been edited by cloudwan: Jul 12 2010, 01:27 AM

i will try a better cooler and see how, by the way, since the system crashes when the temperature is around 55 C, so u think better cooler will help??