just take out & put back my HSF, oso put new thermalpaste, result is same. nothing happen. might need to new HSF or water cooler.

* where is this ngeseng bulk order? kenot find arr.

This post has been edited by gengstapo2: Apr 19 2005, 09:10 PM

try this
http://forum.lowyat.net/index.php?showtopic=137856&hl=

guys i have a problem and i need some opinions. currently i'm at 8*300 vcore 1.678V vdimm 3.0V.

at first at the settings above i could get stable at 1.65V. then after a few weeks my system got unstable to the point where my programs were terminated and get random reboots. so i increased my vcore a notch then everything was fine. now yesterday it acted up again, getting crashes and random reboots. so now i'm forced to raise the vcore another notch...

i wonder wat's wrong?? any of u guys have encountered this kind of problem??

puaahhhh!! so big woo this HSF. big than XP-120. since price lil bit cheaper, gonna try lerr.. thanks mazdagtr210..

woooo...at this rate u might end up frying your proc...but sorry bro...have no idea la...have u tried the default setting and see if any stability issue...

There is rumours saying that running Winnie at >1.6vcore will reduce overclocking ability overtime. Dono how true it is this but better be cautious and dun increase vcore anymore.

this wan nice....cun cun...

but luv my hyper 6....all copperrrrrrrrrr...hahahaha...alluminum dun like ler..

jslut, heat issues perhaps?

Ram maybe...try memtest
HD data corrupt maybe...
Heat problems maybe...(but unsual for u lar coz got big fan n HS....but try reinstall them add more of thermal paste)...
Virus maybe....
PSU not supply enuff juice...

try lar...maybe got one above...maybe...

i'm beginning to feel that my psu is the problem. before this i mod the psu so could supply high 3.3V rail. now that i've pulled down, probably it's beginning to destabiliza

but measuring the rails seems nothing is wrong with it... and that's with a multimeter. rams, hdd, virus and heat seems impossible coz tried overnite memtest and no problems, temps never go above 44C, had ghosted to virgin installation.... nothing works

it seems i mite have to find another good psu

gengstapo2 u modde it like this


Attached thumbnail(s)

ic.. but where u put connection to tat small fan? SYS/ NB fan port arr? just buy new freezer64 from ngeeseng, but result still dasame lerr. freezer64 fan only running at 2220RPM(highest). how arr? but, from ur siggy, u notice tat ur using clawhammer. mine is winny wooo?

* thinking of putting 2 small fan & connect it to SYS & NB fan port. btw, what urs fan's brand & size?

This post has been edited by gengstapo2: Apr 21 2005, 09:32 AM

Yeehaa.... Prime at 2.56GHz, stock cooling. Vcore 1.525v +13%

both of my fan running at 5000 rpm. I get this fan from acer veriton 7500g and 1 more from stock amd64 3200. u must use artic silver for the thermal paste.

aiiyakk.. too many thing to be do. tot tat amd64 is cool but mine is damn hot. just run cpu-stress in default setting for 1 1/2 hour, hightest load at 65c sometimes 64c. idle at 55c-57c. what size is ur fan? is there any other fan tat got gud pressures i can buy from shop? ermmmmm maybe delta fan could help me out.

This post has been edited by gengstapo2: Apr 21 2005, 12:05 PM

i want to ask, does K8 cpus tolerate burn-in to achieve higher speed?

Err... I don't see mine can achieve higher after burning in for a week.
It's god-damn Winnie 3000+ 0503.

some people burnt-in their proc to get higher speed...some burnt-out the damn proc in the process of achieving that goal...hahaha...
mine cannot push no further...maybe shud change the proc...

did u guys really try pushing hard the htt?
try using 2:1 devider n see if the htt gan co above 300 with multi 8
in my case, i guess its my limited vcore or stock hsf..
p/s: i manage to reach 340x8.. superpi can at 330x8

yes be careful of ur processor, don't push vcore too much

it seems i've pushed mine too far, sent my rig to robyncom for checking and initial checking found out that my proc could be the culprit

oh man, dtr isn't that easy to find around here