oOOoOo...dual channel....

maklum ler i nie still noob....hahahahah...

weh salah la...2.85 max....kekekek...sorry typo error....

brudda, that ocz ram will only fly when u give high vdimm

once u put in 3.3V above, sure can go more than 250fsb

n i oso fly out of my head if either one mobo or processor is blown...


wakakakakakka.......

This post has been edited by antonio_zth: Apr 18 2005, 04:29 PM

dun't worry man, as long as u don't go over 3.6V and got a fan above the ram sure safe punya

AMD64 3000+ s939 Wincester core
***CBBFD 0442SPMW***
MSI Neo2 Platinum NF3 =bios 1.37mod=
Vcore 1.4v stock heatsink fan
Mushkin 2x256 PC3200 LII BH5 running 133/200 divider
HTT setting : 289 x 9 2600Mhz
LDT multiplier at 3x
Vcore = Startup (default)
AGP voltage = 1.5v

Stable so far after Prime 3 hours and still going while taking this screenshot. Highest load temp is 54C in non-air con room during nighttime. Prime is done at night.

However, i notice an trend with stock hsf, once temp >56C prime will produce error. I dun have good heatsink to push it higher.

This post has been edited by fr!tzz: Apr 19 2005, 12:09 AM


Attached thumbnail(s)

damn great with stock Vcore...keep it up.

thats totally a very good result indeed... hope i can get proc like yours... ur so lucky to have that stepping and batch proc.
thats why i'm looking forward for Venice since i CANT get the proc batch like yours.

This post has been edited by rzonealley: Apr 19 2005, 01:20 AM

Borrowed this cpu from my fren. Since he not into overclock, basically running default 1.8Ghz only, pretty wasted. So i borrow it and try clock. Who knows can push all da way to 2.6g and still prime stable.

Unfortunately he duwan sell to me.

thats totally a GEM, u should try offering him at high price. then tell him that other proc is still good for stock clock running. Summore tell him that newer proc got better mem controller than old one like CBBID 05XX upwards.

damn man!! why ur cpu so cool? mine less than 1 minute after boot omost 57c oledi using stcok fan(no OC)? wonder why?

Stabilized system...



Dun wan go higher....

Tips & Tricks:

FSB: 245
HTT: 4X
Multiplier: 9
Vcore: 1.525v
Vcore Percent: 10.0%
Vdimm: 2.85v
AGP Voltage: 1.60v
Cool n Quiet: Off
AGP: 67

Ram Timings: 3 4 4 8
Ram Type: Kingston KVR DDR D43 512MB
CPU: AMD 64 3000 (CJPW 0507)
Power Supply: Acbel 400w with Active PFC
Ram Coolers: Vantec Ram Heatspreaders (Copper)
CPU HeatSink: Cooler Master Hyper 6
CPU Fan: Taken from Cooler Master JET 4

Voltage flunctuates: A little i guess.
Casing Temp: Heat rise not felt.
Inside Casing Temp: 34c - 39c(priming)
Heatsink Temp: 33c ( in between the Hyper 6 fins on the 6th floor)
CPU Temp: 47c - 53c (Up n down while prime)
Prime95 Affinity: 10
CPU Z: 1.28

i wouldnt say that 53c at full load is so cool la...it's just normal...but yours at 57c at stock is, i guess not so normal one...

ello remysix, then how to solve arr? buy xp-120?

hahaha...i dont mean ur stock cooling is not good coz there are people using stock cooling and oc but still managed to get around 50c if not lower than that...that's why i said not normal la...from where that u get the reading...what kind of thermal paste or something u used...if u read the thread, first time using xp120...i got 80c temp at full load...idle just like yours...finally i found out that my hsf is not properly installed...that time i've already bukak and pasang for 3 times...when finally know the problem...i got it A OK...now doing 30c idle...oc to 240 wif mem@2336...if 270 as my sig...temp goes up to 35-37...full load never exceed 50c...try to re-check ur installation la...

@antonio i think with ur rig can push exactly at 250fsb 1:1 2.5-3-3-7. i done that with my DTD43 vdimm at 2.8v. but my proc can run at 1.45vcore at that setting. thats my 24/7 setting.

used artic freezer 64 with dual fan setup cool man load only 43c idle 29-30c

hrmmm.. im using original hSF here. but tat fr!tzz manage to get better wif his stock fan. tat why im quite dissapointed wif mine.

^ how much lehh?

This post has been edited by gengstapo2: Apr 19 2005, 03:55 PM

Wow, those are nice temps! What kind of overclocks do you get with those temps?

not only fritzz, but most people got temp in those range..
u should check ur HSF..

check at ngeseng bulk for the prizzze

so far can manage to 2.5ghz no problem at all but daily used only at 2.2 ac freezer 64 is very good maa.

This post has been edited by mazdagtr210: Apr 19 2005, 07:47 PM