AMD 64/SEMPRON ---- OC DATABASE, Ocing results..OC problem?ask here..
|
|
 Mar 27 2005, 12:53 AM
Return to original view | Post
#1
|
 
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach  
|
i'd suggest the ranking is done based on % of oc...e.g.
pccrazy -- rated: 2000Mhz oced:2610 % oced:610/2000 => 30.5% So...the oced achieved: 30.5% just my suggestion... now...going for the oc and getting the screenies This post has been edited by remysix: Mar 27 2005, 12:54 AM |
|
|
|
|
|
Mar 29 2005, 07:20 AM
Return to original view | Post
#2
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
i just wondering...the temp you guys mentioned is taken from which reading? BIOS? Smartguardian?or external probe?...coz my BIOS reading and Smartguardian reading totally different...by about 10C...normal load reported 35-37C...BIOS...hahhaa...always got the delta at full speed...which is set to run at that speed with 50c threshold...damn hot la...already used the as5...followed the instruction...so back to my question...which reading do u use?
|
|
|
Mar 29 2005, 02:13 PM
Return to original view | Post
#3
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(PCcrazy @ Mar 29 2005, 07:34 AM) My reading is from Corecenter provided by MSI...actually reading from windows.. used the latest already...i think...anyway...stumble across a forum and this fella recommend to use Speedfan...here's the linkWe know that the temp is not that accurate..but my BIOS and Corecenter reading is about the same.. Maybe you should try downloding the latest smartguardian...  ...it sounds great...maybe will give it a try once got back... |
|
|
Apr 4 2005, 09:59 PM
Return to original view | Post
#4
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
mine...not much...but still working on it...mine is CBBID 0504MPMW...it's among the worst i'd guess...dunno why but the temp is killing it...
Attached thumbnail(s) 
|
|
|
Apr 5 2005, 07:01 AM
Return to original view | Post
#5
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(PCcrazy @ Apr 5 2005, 02:44 AM) why dont u post the cpuz screenies together..so i can put it in the records.. cpuz screenie Attached thumbnail(s) 
|
|
|
Apr 5 2005, 09:07 AM
Return to original view | Post
#6
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(shadow_dweller @ Apr 4 2005, 10:15 PM) whoaa .. remyx your temp is very very very high ... dont think...it is abnormal...already take the hsf out and installed it again...as per the instruction...used as5...but still got this temp...looks like i have to take it out again...and installing the ram stick under the wing is damn troublesome...only once i got the temp to cool down, then can see how this proc can perform, even the stepping is not good...but who knows...you install your HSF properly or not ? 1.5vcore running at75 degree celsius it abnormal i think. |
|
|
|
|
|
Apr 5 2005, 01:32 PM
Return to original view | Post
#7
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(e-jump @ Apr 5 2005, 12:18 PM) did u touch the hs? hot? that's the prob...the hsf doesnt seem to be hot...maybe something is wrong la when i tried to wrestle the hsf over the ram stick (DIMM4)...seems like there is micro gap between the hsf and proc...well back to the board again...maybe bios glitch.. btw,pump it laa to 280++ i can even do 340x8  |
|
|
Apr 5 2005, 10:04 PM
Return to original view | Post
#8
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(e-jump @ Apr 5 2005, 01:50 PM) is the stick too near to the proc? ya...i can use the other 2 slots...but no dual channel la...btw...does dual channel plays important role like p4 system...u can use the other 2 slots rite... btw jslut, try deviders laa... juz to see how hi the htt can go  |
|
|
Apr 8 2005, 09:38 AM
Return to original view | Post
#9
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
finally...got my ram stick on DC...and the hsf alligned on the proc...but with some mod on the xp120...last time, cannot put the hsf flat on the proc...running DC alright, but the temp is suicidal...reached 80c on full load...due to the small gap between hsf and proc...but now ok already...temp is 34c at idle...full load around 40c@1.60v...
|
|
|
Apr 8 2005, 06:11 PM
Return to original view | Post
#10
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
just done my merely 5 hours prime on 260x9.0...the temp at full load is 44c degrees...picture capture...but i stop the prime then capture...already drop to 38c...very fast la this xp120 do its job...actually this xp120 is cacat a bit...i've already peeled off 2 of its fins to make way for my twinx pro on DC...but performance wise...still ok...trying to prime 265 now...and see how hi can my cbbid 0504 can do...wish me luck
 added: my room has no aircond...and it's very humid...i also cannot tahan stay in here for more than 5 minutes without the ceiling fan switched on... This post has been edited by remysix: Apr 8 2005, 06:14 PM |
|
|
Apr 8 2005, 10:57 PM
Return to original view | Post
#11
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
haha...that's the mistake...actually taken already and stopped the priming...but forgot to include the cpuz...so lauch the cpuz and capture again...replace the 1st one...btw...just finish the 265...temp is 46c-47c...that would be normal at full load huh...ok...going for 270 now...
|
|
|
Apr 9 2005, 09:58 AM
Return to original view | Post
#12
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
ok...prime stable at 270...gonna take a break for now...will try higher fsb later...
Attached thumbnail(s) 
|
|
|
Apr 9 2005, 11:18 AM
Return to original view | Post
#13
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
with stock hsf, you'll get stock kinda temp la...if ur stock can do as good as my hsf...i'll be damn rugi buying this hsf
 This post has been edited by remysix: Apr 9 2005, 11:19 AM |
|
|
|
|
|
Apr 9 2005, 12:47 PM
Return to original view | Post
#14
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
48 is still good what...at 275...failed priming within minutes...need to pump in more juice i think...we'll do it shortly...now running at 270...idle at 33c...i think i'm gonna use this for my 24/7 since already primed it for 7 hours...hope can go higher considering the proc is cbbid 0504mpmw...300 would be impossible...at least not with air cooling...
/offtopic: rzone...if u ever wanna upgrade ur gfx...please let me know...i've one same as yours la...maybe can do sli...chipset is moddable... |
|
|
Apr 9 2005, 01:21 PM
Return to original view | Post
#15
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
in the middle of priming now...max temp is 49 with this maxthon running...if not, stays at 48...will post the result afterwards...
|
|
|
Apr 10 2005, 07:52 PM
Return to original view | Post
#16
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
arghh...mine stuck at 270...seems like the ram cannot take it anymore...hmmm...means i've to use the divider...
|
|
|
Apr 11 2005, 10:29 AM
Return to original view | Post
#17
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
r u selling these or just for our information???
|
|
|
Apr 11 2005, 03:18 PM
Return to original view | Post
#18
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo2 @ Apr 11 2005, 01:30 PM) full load at 53c? must be joking larr. mine wif default setting(no OC) & using stock fan oledi 57c-58c in idle. after gaming(warcraft), bout 62c. do u use as5???if yes...u should check ur hsf again...mine was 80c at full load...after checking...the hsf is somehow tilt a little bit, just enuff to make it shoot to 80c...now ok already...oc at 270x9.0 1:1...24/7...idle around 34-36c...max...around 45-46c...but mine is xp120...not stock hsf...but shouldnt be too far la...57-58 is way too hot for non OC system...btw...urs is winnie or the castle??? |
|
|
Apr 12 2005, 01:45 PM
Return to original view | Post
#19
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
damn rite dude...maybe u the 1st at lyn...so dont forget to post the result...
|
|
|
Apr 12 2005, 02:30 PM
Return to original view | Post
#20
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
woaaa...nice thinking...but u guys have to count me out...just got the winnie a month ma...btw...i thought PCcrazy is the only one that is 'crazy'
 This post has been edited by remysix: Apr 12 2005, 02:32 PM |
|
Topic ClosedOptions
|
| Change to: |  0.0365sec
 0.77
 7 queries
 GZIP Disabled
Time is now: 1st December 2025 - 08:51 PM |
Quote