Eh??Same as mine....hihhihi...

yaww e-jump.. ur chasing got fan or nat at ur side panel? or just 'open' one wif nothing panel cover?

thank to my Hyper 6 no need anymore open up side panel....hihihi....weh PCcrazy....bila lak aku asked about CNQ....i asked about why my rams cannot mix.....

2 x OCZ 256x2
1 x KVR 512x1

when all 3 ram installed....alwiz tit tit tit....machowhaii....

mine is centurion5.. no sidepanel fan..
juz 80cm intake at hdisk n 120cm exhaust fan at back
n i close the sidepanel 24/7
[opening sidepanel increase the sys temp by 2C

manual timing setting or spd?
coz timing not same rite?

to mix a high perf ram with value ram, u guys need to set timing manually.. but it depends on board also.. for my board, when i set to manual, it cant boot.. got that teettteteteeett sound.. but when i reset the cmos, it can boot, but it run at ddr266, 2.5-4-4-8 2T
so i have to adjust to manual after that.. no problem~!!

** wah coolermaster hyper 6 look nice oso. might try this one larr. how much this one arr?

aledi set manually...

but the problem is if one one stick KVR n one stick of OCZ can....but the timing cannot get 400mhz...only 333....bcoz the OCZ is only 2.5 CAS...cannot 3...uwaaaaaaaaaa....

gengstapo, get XP-120 la.. but hyper-6 is good also. 6 pipeline. xp120 only have 5 pipeline, alu summore.

up to u to decide. as for me i choose xp-120. a bit ligher than copper. my system already getting heavier. almost 20kg

but gestapo before u decide to buy the hsf - hyper or xp120...better find out the culprit of ur hi temp...even on stock, it should not be that hi la...if not, wasting money only buying those good hsf...but up to you...if u feel like buying one...go ahead...just a word of advice...peace

xp120 n hyper6 both good.. but i personally prefer xp120 coz it is lighter than hyper6.. in terms of looks, hyper6 looks nicer

andddddddd heavier

aiyaakk.. damn larr. spending most money on those HSf. always experience heat problem since using P4 Northwood & now, amd64 winchester. yesterday playing CM5 & temp stable at 67c!! if keep all money on those HSf might able to get WC setup. huhuhu..

* how bout performance for the xp-120 & hyper6? is there any link comparison tat can help me to preview on both product? thanks dudes.

This post has been edited by gengstapo2: Apr 23 2005, 08:06 AM

bootable only
0349 VPMW

I never know 754's are good overclockers..
2.8 even though bootable is great clock..nice..
so what is the prime stable clock?

wow, thats freakin high
u beat my highest htt achieved, which was 340

cun cun...mine's only manage 300 flattsss

i manage to increase my prime stable speed up to 2.77ghz but still cant get pass 2.8ghz..
more weird is both bootable n bencheable stuck at 2.8ghz

Hmm.... Previously with DFI UT nF3 and 3200 1MB

429HTT

Nice OC's people. Keep it up!

Btw, is the increase in HTT noticeable in benchmarks and/or real world applications itself? Does it really boost performance significantly comparing same memory settings in 1:1 and with higher HTT (dividers)?