Wahlawwehh...

3000+ winnie....mine is CBBID 05 02 or 03 sumthin n end letter was PWJ or sumthin....juz bought 2 days ago... MSI Neo3 NF3 Ultra(hahahaha MSI lagik)....n 512mb KVR hynix dt-d43....210 rite now 1:1 all stocks...still prime'ing at home...dunno what happend...hahahaha...

Temp is 37 idle n 52 while prime....1.3v...mem 2.6v....

hope mine can o/c about 35 more HTT oso gud 4 me aledi...

Weh PCcrazy.....turun lah ilmu sket....rite now still use 1:1...see what the KVR is capable of.....hihihihi....

Wahhh...i oso dunnow what happend...mebbe pci/agp lock didnt lock properly....btw hd is ok...file ok... alil bit of corruption only....weh PCcrazy...here are the screenie.....




Winnie 3000+ x9 x4HTT 230HTT 1.5v(stock 1.4v)
temp:39c idle 52c while priming...

guts got....money dun have....if blow can affod buy sempron second hand only...

ello all....this is dun with fear n a lot of prayers....ahhahahahah



this is a little bit more gatal tangan.....



this really keng chow....There are with dividers..300HT..but who wanna see wan what....summore SuperPI can manage 40's jerk....where got kick....ahhh...juz show lar wiff dividers.....300HTT...jeng jeng jeng....




Stability Test...Prime95...running and temp below 50c.....



After stop prime....

p/s:thanks to PCcrazy for tips n tricks......can ask him for help...very helpfull guy....maklum ler noob like me needs teachers like PCcrazy....hahahahha...







note:i ran with only only sticks of kingston 512MB 400mhz KVR...2.85v...CPU 1.50 Adjust Percent 10.00%.....leceh la ini ejasē percent...why not make only voltage selector....haiuyaaahh...

The OCZ cannot do what this KVR can do....dunno why lar...mebbe voltage not enuff....

This post has been edited by antonio_zth: Apr 19 2005, 12:08 PM

UTT better than TCCD???

btw what is both of them?? i still dunno oooOOoOo...

DDR,DDR2,DDR3 KVR,Corsair,DT/BT-D43,winbond bh-5/6 tau lar....but what is TCCD and UTT...

eh why u faster than me....all same except u dual chan....mine single chan....is dual chan can gain as much like urs????

greattt???....tiuuu....talak shiok maaa....heheheheh....

btw whats the max u guys ever heard in terms of 1:1 HTT on any rams???

OCZ???cannot lar tailor....mebbe have to use DDR booster....can't get timing like 3 3 3 8.... x 3 3 8 the x must not be 3 if 2.5 can....dunno why...voltage aledi habis at 1.85....summore 240 cannot boot...4x HTT u know....if 225 can boot wif 4X HTT...dun even bother go HTT 3x or play wif loose timing coz the OCZ wont boot.....

max i get last nite...was 233...HTT x4... 2.5 4 4 8...vdimm 1.85...cpu voltage same like the time o/c d43 wan...use OCZ cannot boot...tit tit tit...sumore malam lagik....tit tit tit...org mau tido pun cannot....

then change to KVR....wahlawwehhhh.....hihihihi....300 HTT x4 no hal...weh ada once maybe i hit 313....yahhh...i remember...got but no screen shot...divider 133 kots...ker 166 ntah....tapi loose timing kaw kaw....heheheheh.....


DC nie what does it means.????

This post has been edited by antonio_zth: Apr 18 2005, 02:22 PM

oOOoOo...dual channel....

maklum ler i nie still noob....hahahahah...

weh salah la...2.85 max....kekekek...sorry typo error....

n i oso fly out of my head if either one mobo or processor is blown...


wakakakakakka.......

This post has been edited by antonio_zth: Apr 18 2005, 04:29 PM

Stabilized system...



Dun wan go higher....

Tips & Tricks:

FSB: 245
HTT: 4X
Multiplier: 9
Vcore: 1.525v
Vcore Percent: 10.0%
Vdimm: 2.85v
AGP Voltage: 1.60v
Cool n Quiet: Off
AGP: 67

Ram Timings: 3 4 4 8
Ram Type: Kingston KVR DDR D43 512MB
CPU: AMD 64 3000 (CJPW 0507)
Power Supply: Acbel 400w with Active PFC
Ram Coolers: Vantec Ram Heatspreaders (Copper)
CPU HeatSink: Cooler Master Hyper 6
CPU Fan: Taken from Cooler Master JET 4

Voltage flunctuates: A little i guess.
Casing Temp: Heat rise not felt.
Inside Casing Temp: 34c - 39c(priming)
Heatsink Temp: 33c ( in between the Hyper 6 fins on the 6th floor)
CPU Temp: 47c - 53c (Up n down while prime)
Prime95 Affinity: 10
CPU Z: 1.28

this wan nice....cun cun...

but luv my hyper 6....all copperrrrrrrrrr...hahahaha...alluminum dun like ler..

Ram maybe...try memtest
HD data corrupt maybe...
Heat problems maybe...(but unsual for u lar coz got big fan n HS....but try reinstall them add more of thermal paste)...
Virus maybe....
PSU not supply enuff juice...

try lar...maybe got one above...maybe...

Eh??Same as mine....hihhihi...

thank to my Hyper 6 no need anymore open up side panel....hihihi....weh PCcrazy....bila lak aku asked about CNQ....i asked about why my rams cannot mix.....

2 x OCZ 256x2
1 x KVR 512x1

when all 3 ram installed....alwiz tit tit tit....machowhaii....

aledi set manually...

but the problem is if one one stick KVR n one stick of OCZ can....but the timing cannot get 400mhz...only 333....bcoz the OCZ is only 2.5 CAS...cannot 3...uwaaaaaaaaaa....

cun cun...mine's only manage 300 flattsss

hihihihi...put fan on high speed running rams weh...

sumtimes it happend in core center where if there is 2 or 3 programs for monitoring the fans speed reading becomes to low.....

hehehehe....weh KVR baru tuh cincu sial....

rugi bought.....who wants???...sell 320 both sticks....hahahahha...

weh PCracer anyone wanna use BH-5 OCZ rams????tell me lar....

yalorr...i agree wif that...bought the goddamm rams lor....