aaah, i get it now

for now there's only my result so i'll post mine for now

COME ON SEMPRON USERS!!!! JOIN IN!!!

semprons from socket A to socket 754 are welcomed


AMD64 SEMPRON SOCKET 754

1. Cyclone87 ~ 2800+ @ 2715 @ 1.45V @ Stock @ Palermo (E6) [12/09]
2. soulfly ~ 2800+ @ 2704 @ 1.616V @ XP90 @ Palermo (LBBWE 0527EPAW) [3/10]
3. wtm0325 ~ 2800+ @ 2680 @ 1.488V @ Stock @ Palermo (E6)
4. mazdagtr210 ~ 2800+ @ 2565 @ 1.57V @ AC-Freezer64 @ Palermo (E6) [16/09]
5. mazdagtr210 ~ 2800+ @ 2240 @ 1.552V @ AC-Freezer64 @ Palermo (E6)
6. jslut ~ 3100+ @ 2475@ 1.5v @ XP-90 @ Palermo
7. soulfly ~ 3000+ @ 2430 @ 1.65V @ Air-cooling @ Palermo
8. low yat 82 ~ 2800+ @ 2402 @ 1.5V @ Stock(?) @ Palermo (E6) [6/01/06]
8. embuhnator ~ 2800+ @ 2400 @ 1.392V @ Stock HSF
9. soulfly ~ 2800+ @ 2400 @ 1.696V @ XP90 @Palermo(LBBID 0514CPMW) [26/08]
10. superpc ~ 2500+ @ 2275 @ 1.45V @ Stock @ Palermo (E6) [13/09]
11.
12. mazdagtr210 ~ 2800+ @ 2240 @ 1.552V @ AC-Freezer64 @ Palermo(E6) [11/09]
13. KenL ~ 2800+ @ 2145 @ 1.45V @ Stock @ Palermo (E6) [10/09]
14. Najmods ~ 2500+ @ 1910 (272*7) @ 1.424V @ Stock (?) @ Palermo (E6) [24/10]

EDIT2:: here's another update to my results

This post has been edited by jslut: Jan 8 2006, 10:49 AM


Attached thumbnail(s)

prime stable?? have to wait later lar

ok i'll get to work on it

bro at those settings i can't prime... prime not stable and i'm almost breaching 1.9V

so i'll leave it to u to either wanna take it out or not

ok u the boss bro

btw i'll try to get the highest prime stable clock and i'll post here

wat ram u gonna buy bro??

btw does the 1.9V affects all amd64 mobo?? coz i tried to set 1.9V once and my mobo just died... good thing can bios reset, works perfectly after that

highest vcore i tried was 1.876V

although i couldn't break 300*9 so i don't know what's wrong.. don't think it's the heat though since never got above 45C

same specs except vdimm=3.4V and using 512mb twinmos SP (UtT)


Attached thumbnail(s)

i've read at xtremesystems or ocforums (can't remember ) that passing 32M super pi means ur system quite stable already... there's a thread for posting 32M results at one of those forums

my rig at settings 280*9 can finish 24 iterations in roughly 32 min

irenic@ there must be somthing wrong with ur hf bro, the temps too high... perhaps u should try other fans?? maybe get a 92mm fan??

currently i'm using nmb 92mm (instead of the screamer delta ff ) and i'm still getting good temps... 43C - 44C at 2.5g

dude, wat mobo are u using?? and u using dtr?? i didn't know desktop clawhammers for 754 still around.. some more got 1mb cache

original?? hmm, wat's the stepping?? i thought earlier clawhammers only got 512k cache

well from wat i can tell he said desktop mar

sorry bro but a bit rong there... there are dtr 3000+ that has 1mb cache. like mine

ok a bit of an improvement here i guess..

i think this is the highest i can go prime stable, anything higher thatn that i can't get prime stable.... but works fine with 3dmark and super pi


Attached thumbnail(s)

only fsb seems power but the clock still not high

hs only warm but i'm thinking of sanding down a bit the xp90 bracket, mite get some better temps

problem is i can't get my ram to run over 305htt.... this one already maxed some more at 3.0 vdimm

nah, don't like using dividers much, only make my rig unstable

last time tried dividers, could reach up to 9*300 but never got it stable

rzonealley@ should've gotten tccds bro, dins was bulking quite a selection of them

maybe next bulk

there is but it's only just been launched a few days ago so i don't think we'll be seeing them in our local market anytime soon