Just asking btw...
AMD 64/SEMPRON ---- OC DATABASE, Ocing results..OC problem?ask here..
|
|
 Mar 23 2005, 05:48 PM
Return to original view | Post
#1
|
 
VIP
15,903 posts Joined: Jan 2003 From: Miri   
|
Errr.... Sempron S754 can join?
Just asking btw... |
Quote|
|
|
|
|
Mar 27 2005, 08:48 PM
Return to original view | Post
#2
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(Snoy @ Mar 27 2005, 05:29 PM) my 24/7 rig on XP90. prime for 6 hours, no error. just want to correct, your vdd is 1.55vVcore: 1.575v, Vdd:2.70v. I'll try to boost up more later when i am free.  edit: on s754 Abit KV8pro rev1.1  it's your vdimm which is 2.7v |
|
|
Mar 31 2005, 04:25 PM
Return to original view | Post
#3
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(De_Cruelz @ Mar 30 2005, 02:38 PM) PCcrazy, you're right about the weather being hotter in Malaysia but that's only during summer here in miri, a typical hot day temp would be at least 40'C outside, because we're quite near to the sea. i still remember somewhere around august last year while having our drag race event, the temp was exceeding 50'C in the hot sunny afternoon! that was measured using Nokia 5210 . A hot day can go upto 41C which is very very hot and i've never experienced that kinda heat before in KL.Now it's autumn in Sydney. So temps have dropped a lot and at the moment, my room ambient temp is 26C which is pretty cool. My 2600+ Mobile is currently idling at 33C and max load is 36C Can't wait till winter when ambient temps drop to single digit numbers  EDIT: Btw, bootable screenie sounds good too! Just so we have a rough idea how much further their CPU's can go with better cooling and higher vcore's  currently my room temperature is at 31'C with aircond and fan off, just windows opened edit: sorry for being off-topic  This post has been edited by soulfly: Mar 31 2005, 04:29 PM |
|
|
Mar 31 2005, 11:38 PM
Return to original view | Post
#4
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
wah... I hope that I can get CBBHD Sempron
|
|
|
Apr 1 2005, 09:55 PM
Return to original view | Post
#5
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(rzonealley @ Apr 1 2005, 03:12 AM) pordon bout my limited knowledge. Sempron Palermo seems to have similar stepping as Winchesters. There's one review from Xbit labs having CBBID for Sempron 2600+, easily cranked up to 300mhz htt clocking 2.5ghz.is it sempron using stepping such as CBBHD? dont get the wrong idea CBBHD is a good stepping for 3000+/3200+ only. just refer to the table on 1st post n u'll see lots of people on CBBHD can OC high. but CBBID works fine on 3500+. I'm getting 3000+ version with 9x multi... but dunno yet what stepping will I get from dinster's bulk. Hope can get a good one to play with. |
|
|
Apr 4 2005, 10:14 PM
Return to original view | Post
#6
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
why so hot? weird eh.
|
|
|
|
|
|
Apr 5 2005, 10:09 PM
Return to original view | Post
#7
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
There's a new Palermo based on E3 revision, which is Venice
 |
|
|
Apr 5 2005, 11:45 PM
Return to original view | Post
#8
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
i'm sure dinster can make it
unluckily, i ordered too soon. looks like i'll be getting the D0 revision only |
|
|
Apr 21 2005, 12:49 PM
Return to original view | Post
#9
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
i want to ask, does K8 cpus tolerate burn-in to achieve higher speed?
|
|
|
Apr 21 2005, 07:13 PM
Return to original view | Post
#10
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
try sempron 3000+ or 3100+
This post has been edited by soulfly: Apr 21 2005, 07:13 PM |
|
|
Apr 27 2005, 05:41 PM
Return to original view | Post
#11
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
CBBID 0502DPAW
any idea how good is this? |
|
|
Apr 27 2005, 11:09 PM
Return to original view | Post
#12
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
hmmm.....
QUOTE(destr0yer@www.xtremesystems.org @ 04-08-2005 03:41 PM) My 0502 CBBID 3000+ cooled by stock cooler get max OC stable at 2610 mhz @ 1.63 volts (290 x 9) in the coldest's days (My case is open 24/7) Now running @ 310 x 8 1.1 (mens: 2x 512 TCCD Patriot 2,5-4-4-7 2T/1T) stable 24/7 1.50 vcore and 3.00 vmen Max FSB @ 1.1 tested: 320 x 8 1T and get 8024 mbps @ Everest If change @ 270 x 9 and keep another settings and voltages, it is very unstable :confused: Strange... Bad memory controler? QUOTE(ozzimark@www.xtremesystems.org @ 04-08-2005 03:58 PM) i've been collecting a database of winchesters over at [H], here's what i have for 0501 and 0502. 3000+ CBBID 0502 BPAW 2500 700 1.6 air dmonkey 3200+ CBBID 0501 DPDW 2358 358 1.45 air BaNaNaS 3200+ 0501 2270 270 1.4 air MrSlacker 3200+ CBBID 0502 APDW 2520 520 1.8 air arnemetis 3500+ CBBID 0501 FPMW 2707 507 1.725 Water mr_ouija looks like hit and miss from that extremely limited sample  note that the 6th column is the mhz oc over stock QUOTE(shiyan@www.ocforums.com @ 02-16-05, 06:55 PM) 3000+ CBBID 0502 needs 1.45v to be stable at 2.3Ghz (9x255) with stock cooler rest of system: Asus A8N SLI Deluxe (do not get this board) 2x512MB old twinmoss PC3200 (don't have money for new faster RAM, running them at 210Mhz) enlight 460w PSU (don't have the 24 pins) QUOTE(Needitcooler@www.ocforums.com @ 02-20-05, 12:19 PM) 3200+ CBBID 0502. I can do 2.4 GHz stock. 2.5 takes 1.6 volts. 2.6 takes 1.7 volts. |
|
|
Apr 28 2005, 11:05 AM
Return to original view | Post
#13
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
I hope mine is different coz it's a Sempron with 128KB L2
 |
|
|
|
|
|
Apr 28 2005, 01:36 PM
Return to original view | Post
#14
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
it's a S-754
there is no S-939 Sempron at the moment |
|
|
Apr 29 2005, 07:09 PM
Return to original view | Post
#15
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
u guys want low superpi? forget about using loose timing like 3-4-4-8
|
|
|
Apr 30 2005, 10:49 AM
Return to original view | Post
#16
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
looks like my CBBID Palermo is not that good also. at stock vcore (1.4v) only prime stable up to 215*9 with no divider. but my mobo undervolts by 0.025v. full load temp at stock vcore at that setting already reach 50'C
i guess the as5 haven't settled in yet, or maybe bcoz of the stock cooling. or maybe the ihs is not making proper contact with the core |
|
|
Apr 30 2005, 04:16 PM
Return to original view | Post
#17
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
Mine doesn't seem to look too good. So far Super Pi 1M benchable at 300*8 with 1.5V*110% straight out of the box.
Just started to do some burn-in. But I think my temp is kinda okay. I'm using stock heatsink only. Burn-in at 313*8 with 1.525V*113%. My mobo seems like undervolting quite a lot Stepping CBBID 0502DPAW.  This post has been edited by soulfly: Apr 30 2005, 04:17 PM |
|
|
May 1 2005, 10:30 AM
Return to original view | Post
#18
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
It's a mobile cpu, therefore no IHS
btw.... i've read somewhere that the turion is not that great. venice is much-much better |
|
|
May 5 2005, 01:30 PM
Return to original view | Post
#19
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(tAmp0i @ May 5 2005, 02:47 AM) Heh.... Found 2 pieces of TwinMOS 1A4T locally locally... u mean in miri? which shop? Shall see how far does it go |
|
|
May 17 2005, 12:01 AM
Return to original view | Post
#20
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
weiii jslut, how's the new palermo 3100+?
|
|
Topic ClosedOptions
|
| Change to: |  0.0363sec
 0.81
 7 queries
 GZIP Disabled
Time is now: 30th November 2025 - 11:34 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.