pccrazy edit on 1st page to ask them to provide the stepping and production date of proc too, so u wont have to ask each of them. i will submit mine later still looking for the highest mine stable huhu.still not satisfied with 2.4 hehe.

here's mine. lousy proc!!!
PCcrazy lend me ur proc...hehe.
mine CBBID 0503EPJW <-- avoid this guy
XP90 +90mm fan. VID 1.664 the one on prime95 is testing2 oni.


Attached thumbnail(s)

this is my benchmarkable clock. pass super pi.
2.5 at 1.7vid.

btw if it pass 3dmark01, 03 and 05 can assume benchmarkable or not.
all the time i use 2.565 clock to submit to orb for my 3d score.


Attached thumbnail(s)

http://service.futuremark.com/compare?2k3=3770305

http://service.futuremark.com/compare?3dm05=647073

link show mine can benchmark on 2.56 @285 fsbx9.

if want fast result either ur proc is stable or not try running small fft rather than
running blend.

btw can u stat what stebbing and batch ur proc is... maybe u get CBBID too like mine

its printed on ur proc surface. must be u didnt see it though.
nvm if u didnt know urs. example for such things written there is

ADA3000 DIK4BI
CBBID 0503EPJW
XXXXXXXXXXXXX

its just as reference so u can compare with others. if u got CBBID 0503 like mine
mostly people can clock up to 2.2-2.5max. unlike those people with older batch
number and stepping such as CBBHD 0445SPAW which can reach up to 2.7
to 3.0.
u might wanna refer to 1st page. at bottom of post #1.

pordon bout my limited knowledge.
is it sempron using stepping such as CBBHD?

dont get the wrong idea CBBHD is a good stepping for 3000+/3200+
only. just refer to the table on 1st post n u'll see lots of people on CBBHD
can OC high. but CBBID works fine on 3500+.

guys needs opinion here,
have anyone encounter problem where ur cool n quite function
CANT be disabled. i noticed that i disabled both cool n quite setting in
bios and corecell i'm still having problem the fan throthling.
on idle my stock fan at 3.9K rpm and when temp reaching 47degres
the fan rotate at 4.9k.
i tried on all bioses that in case my bios have problem. currently on 1.41mod
before this i'm on 1.36mod. i also tried the latest one where i still having the
same problem.
help???

@De_Cruelz just be patient mate. Maybe the proc want to have warranty
for longer time b4 it came to ur hand.
hope its a gem.

will update u guys later got my hand on one lousy proc again. but still hoping
for more CBBID 0451MPM

Result from new proc CBBID 0451MPM just done with my initial burn in with
SICK VOLTAGE. 1.76volt.




Attached thumbnail(s)

u can put it both for just a record and reference. but for permenantly i'm
using this CBBID 0451MPM.

actually the proc can prime stable at 1.65vcore @ 2.5G but since i want to do
burn in a bit i just hit the vcore as max as i could in hoping the chip can reach
high clock with low vcore.

very nice CAA2C u got there. 2.8 prime stable is like dream come true to me.
600W OCZ Powerstream

so how the result of the proc? it must be in ur hand today.
CAA2C 0505?

yeah thats totally high in ur sig its on xp120 right?
mine at 1.76vcore+xp90 never reach 60degrees the higest is 58-59degrees.
there's s.thing wrong with ur cooling.

This post has been edited by rzonealley: Apr 4 2005, 10:54 PM

i think my ram cant handle those high fsb when put divider. i need a better
ram right now. dtd-43 not enuff for my system hehe seems like winnie
like those ram who can get a long with not the one left behind.

how to check the memory controller is dead on winnie? i'm just curious seeing ppl with dead mem cntrler. just like to know what happen to the proc
actually?

yup that damn cool man 40deg. mine with 1.58vcore full load is nearly reach 50. urs is 1.65 only 40?? guess xp120 really better than xp90.

mine at 250 fsb vcore 1.42v running 24/7, fan speed at 2700(so silent haha)
max temp 48. satisfied with my cooling too but that xp120 of remysix is damn cool. i only run at higher clock for benchies.

i think i need a better ram to oc summore. this cbbid 0451 didnt like my D43.

nicely done there bro.

if u still didnt buy it yet keep that money 1st. maybe u can gether funding for venice.
DAA4BP with CBBLE perhaps