walao.. i like this bike.. very cun..

http://forum.lowyat.net/index.php?act=Atta...post&id=1118805

wat do u guys think the size of the rim and tyre?? and the tyre is DURO ryte?

This bike tyre damn low profile and wide rim also Malaysia hard to see that kinda tyre



Btw anyone have ABM pipe can comment about the sound arr?? How does it sound like ? And how the performance? And howmuch is ABM pipe arr??BTW the Pipe i bought from samba alrd kena saman liao RM20 settle They ask RM50. I direct ask them open saman for me i tell them i ask my fren cut the saman for me also RM50 so i don't mind pay the saman than they ask me howmuch u want pay? I say "RM10 laa i got 1 more RM10 later want makan he say min RM20 than i time rushing also. so i say ok laa they tell me dont let me see you pipe again if not i take ur bike go lokap " I say thank you and bye bye:) Nowadays so many blocking . So now loud pipe all must keep untill after Raya than only pasang

this bike is demonstrated by maxxis de...

i want to know the size of the rim and tyre...

You wanna fit TZM rim on LC? Heavy LOL.

hi guys
today i got the opportunity to test my bike and just to share with all of u my 'humble' results
here are the comparison results

Before
Mitsubishi ignition coil
ngk irradium ix plug
size 41 sprocket

1st gear = 25kmh
2nd gear = 60kmh
3rd gear = 90kmh
4th gear = tops at 130kmh


Current
Mitsubishi ignition coil
ngk irradium ix plug
+
58.5mm racing block
28mm carb
brt i-max cdi
nob1 sss
size 38 gold sprocket with racing gold chain (forgot the brands )

1st gear = 50kmh
2nd gear = 85kmh
3rd gear = 120kmh
4th gear = 150kmh++

* please note that the above is MIGHT not be the OPTIMUM speed to change the gear , it might be over-rev cuz i can feel my engine shaking like hell and it sounds like it was about to tear apart . doing a lot of this can 'kill' & torture ur engine . im just doing this for result purpose

overall im very satisfied with the result.

oh btw im looking for secondhand yamaha x1r original racing footrest for my LC . anyone selling?

This post has been edited by Spayz: Aug 4 2009, 11:57 PM

no its not...

its the bike from sing motorcycle bike shop in ipoh... can even see the sing motorcycle sticker there..

last time i ask, the were selling this for 20k... the bike got audio...

see the exhaust position...

This post has been edited by kinwei3250: Aug 5 2009, 01:44 AM

I m thinking of it, haha. cornering should b very good.


around the same, haha. I am using 15-39 chain 428.
1st = 45kph
2nd = 80kph
3rd = 120kph
4th = 160kph




yesterday I took a shot with fren's cam.
blue arrow --> distance i travel to test top speed.

I hit 120kph, in about 12s.

the rim is Racing Boy type 811, maybe 2.15inch wide for rear, and 1.85inch front. that was like fitting rear rims on the front
i might be mistaken by the rear tyre size, looks like 110/70 or 100/80 one.
and nope, both of the tyre is from Maxxis racing one, although the pattern looks like Jambatan Batu Battlax C-Type

I think 20k for this bike is too much la,
because last time the SOL's promo bike was sold for RM6.5k only.
can take a look on the bike's pict here :

http://forum.lowyat.net/index.php?act=Atta...=post&id=918112

no mj 120 @ 125 i think....

i jus test my LC top speed yesterday..
can hit 150 km/h ^^

charge , u got mod wat for ur LC?? my LC onli can reach 140km/h but i din tunduk the body , u can reach 160km/h got tunduk body ??

i wan to ask the new batch LC top speed can reach how ??

Wa Evil 2moro wan try?? Tomolo me n calvin w8 u below the tree mau?? u mean the full carbon lc with the pipe conected to tail only 6.5k??

My setting for stock engine, PJ = 38, MJ = 120
for 160cc, PJ = 38, MJ = 125 <-- this one is good for hot days, if cold morning, gotta use PJ = 40.


I mod a lot. No tunduk can reach 160kph. Tunduk I never tried.

Hi Bizzy,

I once use this RXZ 26mm Carb. it does not support TPS. it also has no powerjet. but if you can tune the carb to proper settings on LC, your bike will fly... but that easy.

---

Added on August 5, 2009, 5:39 pmthis bike has been bought by another shop in Shah Alam, near my house. but then the shop tear the bike apart and install a different accessories to it, now it looks like a normal bike... hahahaa/.

This post has been edited by alcalie: Aug 5 2009, 05:39 PM

[quote=Are_keem,Aug 5 2009, 10:38 AM]
the rim is Racing Boy type 811, maybe 2.15inch wide for rear, and 1.85inch front. that was like fitting rear rims on the front
i might be mistaken by the rear tyre size, looks like 110/70 or 100/80 one.
and nope, both of the tyre is from Maxxis racing one, although the pattern looks like Jambatan Batu Battlax C-Type

is it the tyre easy to get? and how much do u think ar?

The rim that bike is using is the same size like mine.
Front = 1.85 or 1.86 i forgot.
Rear = 2.50

2.15 is for 3 batang (Rear)

Size of tyre he's using is most probably 110/70 for the rear.

---

Added on August 5, 2009, 6:44 pmbtw 20k for that bike is way too expensive.

U can get a custom made under seat Y-Pipe for not more than RM1k & fully stainless steel.

Last time i wanted to sell my bike with everything on it for RM9k only if im not mistaken. (When it was orange in color)

This post has been edited by samba18: Aug 5 2009, 06:44 PM

samba u know where to get the tyre?

whoooooo.
i test my bike in front of TAR College. theres a stretch of road in front of it
i need to time my speed next time im there