Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 Penang's Overclocker Club Official Thread V4

views
     
TS@meno
post Nov 24 2008, 01:13 PM, updated 13y ago

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
After V1, V2 and V3 for the POC thread, i guess it's time for us to move on to V4.
The past threads had brought most of the Penang active PC enthusiast together and had been proven successful for information sharing.

Guys, let's continue sharing in this new V4...
As usual, there is only 1 rule here...no "spamming"... tongue.gif

Let's begin a new chapter for POC here...
Hopefully, V4 will bring us together for more outings, more events and more information sharing.

P/S: Since the mods had moved this here to the Overclocker's United, i'm hoping that we could have more focus on OC and Technical Information sharing rather than other chats. Hardware price, penang shop infos should be fine though.

This post has been edited by @meno: Nov 27 2008, 09:07 PM
TS@meno
post Nov 24 2008, 01:16 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
Reserved...
TS@meno
post Nov 24 2008, 01:17 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
Reserved


This post has been edited by @meno: Nov 24 2008, 01:18 PM
TS@meno
post Nov 24 2008, 01:20 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
Reserved

Guys, i'm reserving these pages for our past outing informations and events and also a whole new POC Database.
Besides that i'm thinking of compiling a shop list of all Penang PC Shops and their ratings.
Will send out my e-mail address soon to seek for feedback from you guys.
Hopefully this thread will be able to provide more information for everyone moving forward.
TS@meno
post Nov 24 2008, 01:30 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
Well, it's been a little silent in here...
To spice it up, i'll suggest that everyone start posting updates about their rigs, a simple photo may do...
eprince
post Nov 24 2008, 05:22 PM

Getting Started
**
Junior Member
260 posts

Joined: Oct 2007
well, i'm not from pg but kedah...can i join here?

jz a lousy rigs can post here ka?...hehe
sonicscourge
post Nov 24 2008, 06:05 PM

Casual
***
Junior Member
436 posts

Joined: May 2006
LOL, finally, wait till streamyx back home up then I can start posting pix of my naked rig....LOL

SPAM
SPAM
SPAM
SPAM!
TS@meno
post Nov 24 2008, 06:50 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
Lolz...we should post a pic of both our rigs side by side on 2 2408WFP...
That'll be uber kewl...
Wait till after exam then i move my rig in...
Think it's time for us to settle the IFX and the TRUE...

Eprince, welcome...
Well, we actually welcome everyone. As long as you're an enthusiast and want to share, here's your place...

This post has been edited by @meno: Nov 24 2008, 06:51 PM
sonicscourge
post Nov 25 2008, 04:33 PM

Casual
***
Junior Member
436 posts

Joined: May 2006
Wah Cow....Where the heck's everyone?

SPAM
SPAM
SPAM
SPAM!
TS@meno
post Nov 25 2008, 06:36 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(sonicscourge @ Nov 25 2008, 04:33 PM)
Wah Cow....Where the heck's everyone?

SPAM
SPAM
SPAM
SPAM!
*
Nabeh, keep asking me to start V4, now V4 started, everyone missing...
Calling out to CsChun, Powerslide, KC...and everyone, come join the party...

eprince, when u wanna post your pic? Some pics will make this thread hawt...tongue.gif
pmmonkey
post Nov 25 2008, 11:58 PM

Casual
***
Junior Member
485 posts

Joined: Oct 2006
From: Planet of the Apes
Adds spam?

=| No pics, no new results from t3h monkey.
*goes back to MIA mode*
karom
post Nov 26 2008, 12:40 AM

Hello everybody
******
Senior Member
1,262 posts

Joined: Aug 2006
From: Butterworth, Penang
Hmm, so quiet arr these days?

All penangites don't want to 'lepak' in lyn.net anymore?
sonicscourge
post Nov 26 2008, 10:07 AM

Casual
***
Junior Member
436 posts

Joined: May 2006
Karom: no idea leh....Recession kot tongue.gif
PM: mana u MIA gi?

SPAM
SPAM
SPAM
SPAM!
fm_hyudin
post Nov 26 2008, 10:23 AM

Casual
***
Junior Member
375 posts

Joined: Mar 2008
hi there,

i'm from jelutong, penang.nice to see penangites here.may i know where i can get to buy cassing from penang?i mean where should i go if want to see alot of cassing choices.any help will be greatly appreciated.i'm using a aopen cassing right now with cooler master hyper 212.So, i'm looking for a better cassing for some ventilation almost similar like cm690.I got cm690 already and sold it out cause bcz the usb port is on top.So, its a bit difficult for me.
TS@meno
post Nov 26 2008, 01:00 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(fm_hyudin @ Nov 26 2008, 10:23 AM)
hi there,

i'm from jelutong, penang.nice to see penangites here.may i know where i can get to buy cassing from penang?i mean where should i go if want to see  alot of cassing choices.any help will be greatly appreciated.i'm using a aopen cassing right now with cooler master hyper 212.So, i'm looking for a better cassing for some ventilation almost similar like cm690.I got cm690 already and sold it out cause bcz the usb port is on top.So, its a bit difficult for me.
*
Well, it all depends on wat kind of casings are you looking for.
If you want something simple and nice and yet not too pricey, i'd recommend you get the entry level Lian Lis.
Those cases have good workmanship, and simple outlook. Not as fancy as the CM690 or Raidmax, but it basically does the job well enough, and they're full aluminium.

The shops around Bukit Jambul Complex should have some Lian Lis.
You might want to try have a look at AdvanceTec which is beside swisspac, or maybe at Precess Technology where they have some Silverstones as well.
Spare around RM300 and you should be able to get a pretty decent Lian Li full alu mid tower case.

Karom, any special POC promotion lately?tongue.gif
tachlio
post Nov 26 2008, 01:24 PM

de~sign "ing"
*******
Senior Member
3,102 posts

Joined: May 2005
From: Penang *̡͌l̡*̡̡
Hi all penang lengchai lenglui...

Anyone planning go PC fair kacau??
TS@meno
post Nov 26 2008, 01:29 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(tachlio @ Nov 26 2008, 01:24 PM)
Hi all penang lengchai lenglui...

Anyone planning go PC fair kacau??
*
Haha, finally i start to see people coming...tongue.gif

PC Fair, haha too bad too close to my exam, even if i do go it'll be for a short while only...sad.gif
tachlio
post Nov 26 2008, 01:45 PM

de~sign "ing"
*******
Senior Member
3,102 posts

Joined: May 2005
From: Penang *̡͌l̡*̡̡
Planning go PC fair took some Hotty picture~
DarkNite
post Nov 26 2008, 01:58 PM

ФĻĐ ИΞШB!Ξ
********
All Stars
11,058 posts

Joined: Jun 2008
QUOTE(@meno @ Nov 26 2008, 01:00 PM)
Well, it all depends on wat kind of casings are you looking for.
If you want something simple and nice and yet not too pricey, i'd recommend you get the entry level Lian Lis.
Those cases have good workmanship, and simple outlook. Not as fancy as the CM690 or Raidmax, but it basically does the job well enough, and they're full aluminium.

The shops around Bukit Jambul Complex should have some Lian Lis.
You might want to try have a look at AdvanceTec which is beside swisspac, or maybe at Precess Technology where they have some Silverstones as well.
Spare around RM300 and you should be able to get a pretty decent Lian Li full alu mid tower case.

Karom, any special POC promotion lately?tongue.gif
Last weekend I went to Bukit Jambul Complex.
I did not see and Lian Li at AdvanceTec.
Precess have 2 Lian Li, not sure what model but definitely not the ones I'm looking for.
And most definitely no Lancool!!! cry.gif

QUOTE(tachlio @ Nov 26 2008, 01:45 PM)
Planning go PC fair took some Hotty picture~
So far PC fair at PISA is like the sardine in the can. sweat.gif
So packed!
Can't even see the hardware so more want to take "Hotty picture" hmm.gif

The last PC fair at PISA is like a big pasar malam when compare to the one held in KLCC Convention center. doh.gif
eprince
post Nov 26 2008, 02:37 PM

Getting Started
**
Junior Member
260 posts

Joined: Oct 2007
@meno : my rig wont make ppl high 1 la...jz noob rig...wakaka...
vamfire
post Nov 26 2008, 02:40 PM

Getting Started
**
Junior Member
171 posts

Joined: Feb 2005
From: North South East West
hello everyone!

Newbie here tongue.gif

I'm from Aloq Staq

Wanna join the party, YAY! icon_rolleyes.gif


vamfire
post Nov 26 2008, 03:16 PM

Getting Started
**
Junior Member
171 posts

Joined: Feb 2005
From: North South East West
BTW, anyone knows where can i fix my ASUS A8 laptop?

Got any ASUS service centre in Penang? hmm.gif

My lappy hinges is broken into pieces sweat.gif
now when i open the lcd it wobble a lot, sigh...

Help me plsss.... notworthy.gif
shawnlut
post Nov 26 2008, 03:33 PM

±±±±±±
*****
Senior Member
837 posts

Joined: Oct 2007
From: Penang
Asus service center at E-gate beside TESCO...
vamfire
post Nov 26 2008, 03:54 PM

Getting Started
**
Junior Member
171 posts

Joined: Feb 2005
From: North South East West
QUOTE(shawnlut @ Nov 26 2008, 03:33 PM)
Asus service center at E-gate beside TESCO...
*
Thanks shawnlut! notworthy.gif

I'll go & check it out thumbup.gif
tkh_1001
post Nov 26 2008, 06:51 PM

Look at all my stars!!
*******
Senior Member
2,547 posts

Joined: Oct 2007
nice!! this thread is finally brought to here thumbup.gif

where are the cooling results ace mei mei promised me sad.gif tongue.gif
DarkNite
post Nov 27 2008, 07:19 AM

ФĻĐ ИΞШB!Ξ
********
All Stars
11,058 posts

Joined: Jun 2008
QUOTE(tkh_1001 @ Nov 26 2008, 06:51 PM)
nice!! this thread is finally brought to here thumbup.gif
I didn't realised it was moved.
I thought all along it was here.
Where and why was it moved?
micdy
post Nov 27 2008, 07:24 AM

Casual
***
Junior Member
406 posts

Joined: Jan 2008
Hi all penangites,

I am looking for Razer Deathadder or Lachesis. Where can I find them in Penang? Can anyone provide me with the shop name and address? Will the price be lower in PC fair? I am jz looking for a mouse, not in bundle or anything....


P.S. Am from SP... tongue.gif
lee82gx
post Nov 27 2008, 04:24 PM

I guess I'm special
*******
Senior Member
3,117 posts

Joined: Jul 2005
From: Penang
micdy,
saw some at prangin mall.

Didn't realize that so many computer shops are popping up since my last visit months ago.

Saw the best price for HD4850 - Powercolor Play! version at RM570
micdy
post Nov 27 2008, 08:32 PM

Casual
***
Junior Member
406 posts

Joined: Jan 2008
QUOTE(lee82gx @ Nov 27 2008, 04:24 PM)
micdy,
saw some at prangin mall.

Didn't realize that so many computer shops are popping up since my last visit months ago.

Saw the best price for HD4850 - Powercolor Play! version at RM570
*
Lolz... Jz came back from Prangin Mall! Got my DA! And its WHITE TOO!!! lolz... Am so happy with it!
limhongwoon
post Nov 27 2008, 08:37 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(micdy @ Nov 27 2008, 09:32 PM)
Lolz... Jz came back from Prangin Mall! Got my DA! And its WHITE TOO!!! lolz... Am so happy with it!
*
u get from nanyang digital??
micdy
post Nov 27 2008, 10:09 PM

Casual
***
Junior Member
406 posts

Joined: Jan 2008
QUOTE(limhongwoon @ Nov 27 2008, 08:37 PM)
u get from nanyang digital??
*
Nah.. Got it from NC computer in Pragi Mall.. RM 195 worth it?
limhongwoon
post Nov 27 2008, 10:10 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(micdy @ Nov 27 2008, 11:09 PM)
Nah.. Got it from NC computer in Pragi Mall.. RM 195 worth it?
*
ya lol, Nanyang digital sell Rm215
micdy
post Nov 27 2008, 10:15 PM

Casual
***
Junior Member
406 posts

Joined: Jan 2008
QUOTE(limhongwoon @ Nov 27 2008, 10:10 PM)
ya lol, Nanyang digital sell Rm215
*
Ya.. I went to Nanyang but they dun have the white one.. They only got the Guildwar Special Edition.. >.<

So went to NC and they got it! lolz
limhongwoon
post Nov 27 2008, 10:16 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(micdy @ Nov 27 2008, 11:15 PM)
Ya.. I went to Nanyang but they dun have the white one.. They only got the Guildwar Special Edition.. >.<

So went to NC and they got it! lolz
*
when this coming soon pc fair , i will buy some new things lol
micdy
post Nov 27 2008, 10:25 PM

Casual
***
Junior Member
406 posts

Joined: Jan 2008
QUOTE(limhongwoon @ Nov 27 2008, 10:16 PM)
when this coming soon pc fair , i will buy some new things lol
*
Lolz.. Was thinking of the PC Fair.. But then.. I wont be around during tat period... cry.gif Might as well get it now.. biggrin.gif
limhongwoon
post Nov 27 2008, 10:26 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(micdy @ Nov 27 2008, 11:25 PM)
Lolz.. Was thinking of the PC Fair.. But then.. I wont be around during tat period... cry.gif  Might as well get it now..  biggrin.gif
*
u go to KL??
micdy
post Nov 27 2008, 10:29 PM

Casual
***
Junior Member
406 posts

Joined: Jan 2008
QUOTE(limhongwoon @ Nov 27 2008, 10:26 PM)
u go to KL??
*
Nah... I will be outstation... cry.gif

TS@meno
post Nov 28 2008, 12:12 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(vamfire @ Nov 26 2008, 02:40 PM)
hello everyone!

Newbie here tongue.gif

I'm from Aloq Staq

Wanna join the party, YAY!  icon_rolleyes.gif
*
Welcome vamfire.
Mind to post your specs and some pics as well?
PowerSlide
post Nov 28 2008, 01:55 AM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
long time no come in tongue.gif

who wana go pc fair ar? i'll be going hopefully for lawatan sambil bergembira laugh.gif

my rig pictar again...

user posted image

user posted image
limhongwoon
post Nov 28 2008, 08:46 AM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
i will go to pc fair , u got go ?
behbin
post Nov 28 2008, 11:18 AM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
Hey guys first time post.I'm from Sungai Ara,and I just want to know what should I get for a Rm 3000 gaming desktop and where to get them in Penang.Thanks if you can reply............ icon_question.gif
limhongwoon
post Nov 28 2008, 11:20 AM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(behbin @ Nov 28 2008, 12:18 PM)
Hey guys first time post.I'm from Sungai Ara,and I just want to know what should I get for a Rm 3000 gaming desktop and where to get them in Penang.Thanks if you can reply............ icon_question.gif
*
Got include lcd monitor ??
behbin
post Nov 28 2008, 12:23 PM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
Yup.If possible,a laptop recommendation as well?
TS@meno
post Nov 28 2008, 05:46 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(PowerSlide @ Nov 28 2008, 01:55 AM)
long time no come in  tongue.gif

who wana go pc fair ar? i'll be going hopefully for lawatan sambil bergembira  laugh.gif

my rig pictar again...
» Click to show Spoiler - click again to hide... «

*
Woot...PS back...
And his beloved Stacker!!!
I tot u changed the colour liao?

QUOTE(behbin @ Nov 28 2008, 11:18 AM)
Hey guys first time post.I'm from Sungai Ara,and I just want to know what should I get for a Rm 3000 gaming desktop and where to get them in Penang.Thanks if you can reply............ icon_question.gif
*
QUOTE(behbin @ Nov 28 2008, 12:23 PM)
Yup.If possible,a laptop recommendation as well?
*
Hi Behbin...

RM3000 for a gaming desktop...
Well, here's my list of items you can look out for:
Intel Core 2 Duo E8400(The least, if budget allows, go for e8500 or e8600)
Gigabyte EP45-DS3/Asus P5Q-Pro
Gainwards Radeon 4850 Golden Sample
2x2GB of ram
WD 640GB HDD
Enermax FMAII 535w

Others you decide and play around with your budget.

About laptop, RM3k is a little hard if you're going for gaming.
But if you want something decent and nice, check out some of those dell offerings below 3k...shd be pretty good bargains...
behbin
post Nov 28 2008, 05:57 PM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
Thanks for the recommendations.But could you guys recommend places in Penang to get those parts at a good price?
TS@meno
post Nov 28 2008, 06:43 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(behbin @ Nov 28 2008, 05:57 PM)
Thanks for the recommendations.But could you guys recommend places in Penang to get those parts at a good price?
*
As usual, Bukit Jambul Complex and One Stop.
The Gainward 4850 GS, u can get it at Precess Technology in BJ, price should be RM680+-.
The other things, you can ask there as well and see if they can offer you something nice.
But if you want the P5Q-Pro, i dun think they carry that, so u might need to get it from Gadget Zone, price should be 520+-.
The Enermax also in GZ.
limhongwoon
post Nov 28 2008, 07:48 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
if u buy used 4870 only rm 750
behbin
post Nov 28 2008, 09:08 PM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
Compared between One Stop and BJ,which is the best that you guys think to bargain at?
limhongwoon
post Nov 28 2008, 09:09 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(behbin @ Nov 28 2008, 10:08 PM)
Compared between One Stop and BJ,which is the best that you guys think to bargain at?
*
BJ la
behbin
post Nov 28 2008, 09:32 PM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
Hahaha.Thanks for the recommendations.I usually am not sure,but are prices at the PC Fair lower than usual,or is it the same?
limhongwoon
post Nov 28 2008, 09:36 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(behbin @ Nov 28 2008, 10:32 PM)
Hahaha.Thanks for the recommendations.I usually am not sure,but are prices at the PC Fair lower than usual,or is it the same?
*
will be lower
PowerSlide
post Nov 28 2008, 09:48 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
@meno,

change colour? where got..change to pink? tongue.gif

buy at pcfair very susah..push here push there, menggeser sana sini tongue.gif i rather go to shop have my sweet time buy it
limhongwoon
post Nov 28 2008, 11:59 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(PowerSlide @ Nov 28 2008, 10:48 PM)
@meno,

change colour? where got..change to pink?  tongue.gif

buy at pcfair very susah..push here push there, menggeser sana sini  tongue.gif i rather go to shop have my sweet time buy it
*
u go at 10.45 somethings la , sure a few ppl at there at friday(first day)
owikh84
post Nov 29 2008, 08:58 AM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(@meno @ Nov 28 2008, 06:43 PM)
As usual, Bukit Jambul Complex and One Stop.
The Gainward 4850 GS, u can get it at Precess Technology in BJ, price should be RM680+-.
The other things, you can ask there as well and see if they can offer you something nice.
But if you want the P5Q-Pro, i dun think they carry that, so u might need to get it from Gadget Zone, price should be 520+-.
The Enermax also in GZ.
*
Not very nice price for a 4870GS.
Precess doesn't sell 4870GS anyway...
tapirus
post Nov 30 2008, 12:25 AM

(︶ε︶メ)╭∩╮ a�tE(R)isk
******
Senior Member
1,237 posts

Joined: Jul 2006
From: espie-prai
hello guys..long time not posting here...any chance for TT???

p/s: did u all get smoke msg from gaban... :0
TS@meno
post Nov 30 2008, 12:47 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(tapirus @ Nov 30 2008, 12:25 AM)
hello guys..long time not posting here...any chance for TT???

p/s: did u all get smoke msg from gaban... :0
*
What sort of a smoke message?

Well, i was thinking of organising a TT later in December.
Anyone has any special agendas to suggest?

Location as usual will tentatively be Greenlane McD for now...Free refill...tongue.gif
iBenQ
post Nov 30 2008, 08:05 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
hi... me new here tongue.gif can i join da club? ahaha
mmohdnor
post Nov 30 2008, 01:22 PM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
my trusty samsung 172x lcd died on me after 4 yrs ... sad.gif
i think it's due to the power brick kaput alrdy .... no output voltage at all ...
now have to source for a new lcd ...argghh ...

haih, i had just thought of getting a radeon 4850 ..
so, what's the best i can get for RM550 max ? (sucks ...thats my budget for 4830/4850!! doh.gif )

is samsung 933bw good? im looking for something with dvi conn if possible
any other candidates? should i wait for pc fair next week?

hey behbin, im from sg ara too man! haha
QUOTE(behbin @ Nov 28 2008, 11:18 AM)
Hey guys first time post.I'm from Sungai Ara,and I just want to know what should I get for a Rm 3000 gaming desktop and where to get them in Penang.Thanks if you can reply............ icon_question.gif
*
btw, any of u guys here work in motorola, intel, agilent? just wonder if either of u guys are actually my officemate! ..who knows
i knew lee82gx 'was' ... hehe right lee82gx?

This post has been edited by mmohdnor: Nov 30 2008, 01:29 PM
TS@meno
post Nov 30 2008, 04:10 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(mmohdnor @ Nov 30 2008, 01:22 PM)
my trusty samsung 172x lcd died on me after 4 yrs ... sad.gif
i think it's due to the power brick kaput alrdy .... no output voltage at all ...
now have to source for a new lcd ...argghh ...

haih, i had just thought of getting a radeon 4850 ..
so, what's the best i can get for RM550 max ? (sucks ...thats my budget for 4830/4850!!  doh.gif )

is samsung 933bw good? im looking for something with dvi conn if possible
any other candidates? should i wait for pc fair next week?

hey behbin, im from sg ara too man! haha

btw, any of u guys here work in motorola, intel, agilent? just wonder if either of u guys are actually my officemate! ..who knows
i knew lee82gx 'was' ... hehe right lee82gx?
*
Rm550? Hmm, try to search for those BenQ LCDs...
They are dirt cheap, and the specs seem pretty nice too.

I work in Bwh...Haha, but well, after some time on LYN, i found out that some of the forumers here are actually my colleagues.
Where are you from? Moto?

Btw those who are new here, welcome to POC...Seems our members database is expanding.
Stay tuned guys, i'll start to update the members database and also our past events in the main page after the 9th of Dec.
Having papers until 8th, so won't have time to start compiling and updating...

This post has been edited by @meno: Nov 30 2008, 04:10 PM
behbin
post Nov 30 2008, 04:30 PM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
For a note,I'm just an 18 year old student..........I'm not as pro as you "old fellars" yetlah.........Anybody going to PC fair?
limhongwoon
post Nov 30 2008, 04:32 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(behbin @ Nov 30 2008, 05:30 PM)
For a note,I'm just an 18 year old student..........I'm not as pro as you "old fellars" yetlah.........Anybody going to PC fair?
*
u got go ?? which day ?? i will go on friday
behbin
post Nov 30 2008, 04:49 PM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
Aye.Friday for no human traffic jams.
limhongwoon
post Nov 30 2008, 04:49 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(behbin @ Nov 30 2008, 05:49 PM)
Aye.Friday for no human traffic jams.
*
ya lol , then u go for fiday ??
behbin
post Nov 30 2008, 04:50 PM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
Will be waiting right outside before opening,playing my psp.
TS@meno
post Nov 30 2008, 05:46 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(limhongwoon @ Nov 30 2008, 04:49 PM)
ya lol , then u go for fiday ??
*
QUOTE(behbin @ Nov 30 2008, 04:50 PM)
Will be waiting right outside before opening,playing my psp.
*
Bro, you might want to use PM in discussing about this.
Use the thread only when there are multiple parties involved in the arrangement of meeting up like an official TT session.
No hard feelings ya... icon_rolleyes.gif
behbin
post Nov 30 2008, 06:35 PM

New Member
*
Junior Member
10 posts

Joined: Nov 2008
Oh.I thought I was just saying that I would be outside PISA just before the opening.Am just a forum newbie......Anyways,regarding the RM 3000 system I enquired.Is a desktop with those types of hardware capable of being overclocked,or is it not advisable?Thoughts?
mmohdnor
post Nov 30 2008, 07:07 PM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
QUOTE(@meno @ Nov 30 2008, 04:10 PM)
Rm550? Hmm, try to search for those BenQ LCDs...
They are dirt cheap, and the specs seem pretty nice too.

I work in Bwh...Haha, but well, after some time on LYN, i found out that some of the forumers here are actually my colleagues.
Where are you from? Moto?

Btw those who are new here, welcome to POC...Seems our members database is expanding.
Stay tuned guys, i'll start to update the members database and also our past events in the main page after the 9th of Dec.
Having papers until 8th, so won't have time to start compiling and updating...
*
QUOTE(behbin @ Nov 30 2008, 04:30 PM)
For a note,I'm just an 18 year old student..........I'm not as pro as you "old fellars" yetlah.........Anybody going to PC fair?
*
ermm i was in Mot for a while but now in Intel pulak ... biggrin.gif

yeah i saw those benq's are cheap, but are they reliable? any issues with dead pixels and stuff?
the new benq series with HD reso is very enticing .... nyum nyum
Benq T2200HD, 22", 1920x1080 ...i wonder how much they gonna sell it at pc fair
coz i saw some forumer bought it lowyat for RM550-580 ...that's pretty cheap! drool.gif

@ benbin,
the spec meno gave is pretty good ady .. even without oc, u can play most games at high reso smoothly ... but as always, oc is much more fun! ... squeeze every bit of ur system for more performance ! hehe (proceed with caution ...dun say i teach u aa.. wahaha)
» Click to show Spoiler - click again to hide... «


This post has been edited by mmohdnor: Nov 30 2008, 07:35 PM
lee82gx
post Dec 1 2008, 06:11 PM

I guess I'm special
*******
Senior Member
3,117 posts

Joined: Jul 2005
From: Penang
QUOTE(mmohdnor @ Nov 30 2008, 07:07 PM)
ermm i was in Mot for a while but now in Intel pulak ... biggrin.gif

yeah i saw those benq's are cheap, but are they reliable? any issues with dead pixels and stuff?
the new benq series with HD reso is very enticing .... nyum nyum
Benq T2200HD, 22", 1920x1080 ...i wonder how much they gonna sell it at pc fair
coz i saw some forumer bought it lowyat for RM550-580 ...that's pretty cheap!  drool.gif

@ benbin,
the spec meno gave is pretty good ady .. even without oc, u can play most games at high reso smoothly ... but as always, oc is much more fun! ... squeeze every bit of ur system for more performance ! hehe (proceed with caution ...dun say i teach u aa.. wahaha)
» Click to show Spoiler - click again to hide... «

*
hey bro....poison yourself with 22" ... later will will 'ter'poison with 4870 hehehe

anyway, don't OC cannot join OC'ers club!
mmohdnor
post Dec 2 2008, 09:15 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
hehe ...
lee82gx, have u gotten urself a 4850/4870 yet?

hmm now confused ady which lcd to choose. i think right now ppl were talking about these great monitors :
samsung 2233sw
benq t2200hd

both are 22" full hd 1920x1080 (16:9), with price range of about RM550-600 ... drool.gif
anybody have info on these two models for penang shops or this friday's pc fair?

This post has been edited by mmohdnor: Dec 2 2008, 09:16 AM
salimbest83
post Dec 2 2008, 09:28 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
okay.. my first post in POC v4..

just got my proc yesterday
this SS take on 2nd night with my Q9550..
dont have time to test it..to tired after back from work..

its temp nearly 90C when running OCCT.
but CORE TEMP show around 76C..
Attached Image

all setting auto in bios except PCI/PCIE FREQ and mem dvider set to 1:1
metsatsu
post Dec 2 2008, 08:26 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
hi everyone. Though i don't live in penang but I go to Penang island very often. coz my gf lives in paya terubong. wow after reading through the previous pages. just realized that there is another hidden pc shop in BJ. i'm starting to like this POC V4 thread. if only i realized earlier doh.gif

btw, what's TT? sweat.gif
gsan
post Dec 2 2008, 08:31 PM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(metsatsu @ Dec 2 2008, 08:26 PM)
hi everyone. Though i don't live in penang but I go to Penang island very often. coz my gf lives in paya terubong. wow after reading through the previous pages. just realized that there is another hidden pc shop in BJ. i'm starting to like this POC V4 thread. if only i realized earlier doh.gif

btw, what's TT? sweat.gif
*
TT = Teh Tarik?? correct me if im wrong laugh.gif
TS@meno
post Dec 2 2008, 10:01 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(gsan @ Dec 2 2008, 08:31 PM)
TT = Teh Tarik?? correct me if im wrong  laugh.gif
*
No, it's tarik tali...
Joking lar, it's teh tarik.

Well guys, so anyone can start suggesting a good date for TT?
If we have it on the Christmas weekend, we might be expecting some LYN Guest from outside penang...
Just a hint, he's a old timer in OC, used to be very active but sorta half retired now...
Some says he has only one eye, some says he has a fetish for cat fights...Well all that we know, he's called **********t... tongue.gif

mmohdnor,
Go for the Dell 27" 2709W ultrasharp...That monitor kicks ass... brows.gif
(Mine is still lying in the box, will set it up later after i leave office... tongue.gif )
Btw bro, are you sure that the Samsung 2233sw is a 1920x1080 LCD? I've seen in Compu-zone price list that it's stated as 1650x1080 only...
bryanyeo87
post Dec 2 2008, 10:11 PM

Below the Belt
*******
Senior Member
3,175 posts

Joined: May 2006
Samsung 24" going for rm 8xx or so this pc fair smile.gif
overclockalbert
post Dec 2 2008, 11:09 PM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
QUOTE
QUOTE(@meno @ Dec 2 2008, 11:01 PM)

No, it's tarik tali...
Joking lar, it's teh tarik.

Well guys, so anyone can start suggesting a good date for TT?
If we have it on the Christmas weekend, we might be expecting some LYN Guest from outside penang...
Just a hint, he's a old timer in OC, used to be very active but sorta half retired now...
Some says he has only one eye, some says he has a fetish for cat fights...Well all that we know, he's called **********t... tongue.gif

mmohdnor,
Go for the Dell 27" 2709W ultrasharp...That monitor kicks ass... brows.gif
(Mine is still lying in the box, will set it up later after i leave office... tongue.gif )
Btw bro, are you sure that the Samsung 2233sw is a 1920x1080 LCD? I've seen in Compu-zone price list that it's stated as 1650x1080 only...
*


@meno,

since you got the 2709wfp, 2408wfp can letgo for me ok? brows.gif

rgds,
albert
mmohdnor
post Dec 2 2008, 11:18 PM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
@meno
nah... im not going for more than 22" ... 27" is close to my 32" lcd tv, which i already use for movies
my initial 'plan' was just to replace my recently dead lcd and the replacement was supposed to be a 17" only ...
but with a budget around 550-600 max, i think 19" to 22" is just nice ...

now, who have any internal info about pc fair deals on lcd? tongue.gif
TS@meno
post Dec 2 2008, 11:34 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(overclockalbert @ Dec 2 2008, 11:09 PM)
@meno,

since you got the 2709wfp, 2408wfp can letgo for me ok? brows.gif

rgds,
albert
*
You should have contacted me earlier...
Someone already reserved it...
I'll let you know if the buyer pulls out...

QUOTE(mmohdnor @ Dec 2 2008, 11:18 PM)
@meno
nah... im not going for more than 22" ... 27" is close to my 32" lcd tv, which i already use for movies
my initial 'plan' was just to replace my recently dead lcd and the replacement was supposed to be a 17" only ...
but with a budget around 550-600 max, i think 19" to 22" is just nice ...

now, who have any internal info about pc fair deals on lcd? tongue.gif
*
Haha, ya lucky you...
You have a 32"...My 27" will be everything for me, movies, games and browsing...
Maybe might consider switching to a 3008WFP if the price is right...
Btw, i do have a 3007WFP-HC under my custody for a week, so will try that out as well... tongue.gif

To me, 24" is the best size for PC. Not too big yet not too small. But after using 24" for some time, you'd feel like your inner heart telling you, hey, lets go for more...And thats when i ended up getting the 27"...
Btw, 1920x1080 on a 22" screen, won't it be a little small?

metsatsu,
Welcome, wanna post some pics of your rig? brows.gif
Btw, i found my dream rams already...On the way now...

Salim, ur Q9550 so fast arrived d? Mine took quite some time before reaching M'sia...Lucky you in getting an E0...I got a C1 when i ordered mine...Tempted to order another one just for the sake of E0... tongue.gif

This post has been edited by @meno: Dec 2 2008, 11:36 PM
iBenQ
post Dec 3 2008, 09:42 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
errr... want to know,, where can i get used branded psu in penang island??
sonicscourge
post Dec 3 2008, 12:34 PM

Casual
***
Junior Member
436 posts

Joined: May 2006
Huar, berapak hari tak masuk ni har dah banyak reply....

Dang, wanna OC also cannot.... Exams lar....Christmas weekend TT? lemme know k?

Btw @meno, **********t????

Added on December 3, 2008, 12:46 pmHuar, berapak hari tak masuk ni har dah banyak reply....

Dang, wanna OC also cannot.... Exams lar....Christmas weekend TT? lemme know k?

Btw @meno, **********t????

Added on December 3, 2008, 12:52 pmHuar, berapak hari tak masuk ni har dah banyak reply....

Dang, wanna OC also cannot.... Exams lar....Christmas weekend TT? lemme know k?

Btw @meno, **********t????

This post has been edited by sonicscourge: Dec 3 2008, 12:52 PM
TS@meno
post Dec 3 2008, 07:19 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(sonicscourge @ Dec 3 2008, 12:34 PM)
Huar, berapak hari tak masuk ni har dah banyak reply....

Dang, wanna OC also cannot.... Exams lar....Christmas weekend TT? lemme know k?

Btw @meno, **********t????

*
Lol...for the name of the forumer, figure out urself lar.
It's so obvious already the hints... laugh.gif

Focus on ur exam lar, forget all OC until after exam...
The TT session, hopefully i get some preliminary responses.
If it's ok then we'll carry on, if not, i might just PM a few who can make it and have a private hanging out session.
Btw, so far haven't seen KC here, anyone informed him about this new thread?
fm_hyudin
post Dec 5 2008, 09:13 AM

Casual
***
Junior Member
375 posts

Joined: Mar 2008
anyone planning to go to pisa pc fair today?
limhongwoon
post Dec 5 2008, 09:19 AM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(fm_hyudin @ Dec 5 2008, 10:13 AM)
anyone planning to go to pisa pc fair today?
*
why so many ppl ask the question ??? the got sell any core i7
fleechy
post Dec 5 2008, 11:15 AM

New Member
*
Junior Member
8 posts

Joined: Aug 2006
From: Penang
Hi,

I am Penang too and I like to overclock my system as well. Just got my C2E QX9650 and managed to OC up to 4GHz without much effort. I am using just air cooling HSF.

This processor is just magnificent. Settings on the Bios as below.

user posted image

FSB : 370
Multiplier : 11.0
VCore Bios : 1.35V but CPUZ showing 1.30V ( I don't know why)

I think my DDR2 RAM is limiting the overclocking capability.

This post has been edited by fleechy: Dec 5 2008, 11:19 AM
salimbest83
post Dec 5 2008, 11:55 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(fleechy @ Dec 5 2008, 11:15 AM)
Hi,

I am Penang too and I like to overclock my system as well. Just got my C2E QX9650 and managed to OC up to 4GHz without much effort. I am using just air cooling HSF.

This processor is just magnificent. Settings on the Bios as below.

user posted image

FSB : 370
Multiplier : 11.0
VCore Bios : 1.35V but CPUZ showing 1.30V ( I don't know why)

I think my DDR2 RAM is limiting the overclocking capability.
*
why ur ram limiting ur ocing?

ur FSB just 740( 370) only..
even my cheapo Nanya 667(333) running @ 900 (450) stable..
zs3889
post Dec 5 2008, 03:38 PM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
Hi meno, pass by here to support you thread brows.gif and im penangian too...

anyway, im a super duper newbie in overclocking, just know that we change the setting of the system to let the hardware runs at a faster speed...

but have no idea at all to overclock sweat.gif sweat.gif

Added on December 5, 2008, 3:42 pm
btw, which coll are you studying now? tarc?

This post has been edited by zs3889: Dec 5 2008, 03:42 PM
salimbest83
post Dec 5 2008, 03:49 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(zs3889 @ Dec 5 2008, 03:38 PM)
Hi meno, pass by here to support you thread  brows.gif and im penangian too...

anyway, im a super duper newbie in overclocking, just know that we change the setting of the system to let the hardware runs at a faster speed...

but have no idea at all to overclock  sweat.gif  sweat.gif

Added on December 5, 2008, 3:42 pm
btw, which coll are you studying now? tarc?
*
i see..

u can head to
here..

sure will learn lots of thing..
http://forum.lowyat.net/OverclockersUnited

i oso learn how to OC here.. thumbup.gif
zs3889
post Dec 5 2008, 06:45 PM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
QUOTE(salimbest83 @ Dec 5 2008, 03:49 PM)
i see..

u can head to
here..

sure will learn lots of thing..
http://forum.lowyat.net/OverclockersUnited

i oso learn how to OC here.. thumbup.gif
*
yea sure i know that here can learn lots of thing, but you should show me which thread is the best for noob mah sweat.gif hahah
cschun86
post Dec 5 2008, 07:06 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
cschun86 reporting in! icon_rolleyes.gif icon_rolleyes.gif


penang pc fair this time is about same as last time,
but a great deal I saw is:

Any of Core i7 Processor Purchase, You are entitle to get a FREE samsung 21.6" LCD monitor!!!


you are right, FREE~


and any purchase of C2D or C2Q processor,
can get the LCD for RM499.
limhongwoon
post Dec 5 2008, 07:10 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(cschun86 @ Dec 5 2008, 08:06 PM)
cschun86 reporting in! icon_rolleyes.gif  icon_rolleyes.gif
penang pc fair this time is about same as last time,
but a great deal I saw is:

Any of Core i7 Processor Purchase, You are entitle to get a FREE samsung 21.6" LCD monitor!!!
you are right, FREE~
and any purchase of C2D or C2Q processor,
can get the LCD for RM499.
*
there got sell core i7 liao ?? they say got a lot leng lui .
cschun86
post Dec 5 2008, 07:14 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(limhongwoon @ Dec 5 2008, 07:10 PM)
there got sell core i7 liao ?? they say got a lot leng lui .
*
yup, I think so,
saw the flyer...

but for the Core i7 one,
better act fast,
just limited for 2 unit per company ^.^

not sure abt the C2D and C2Q.
I think no limit.
btw, the LCD real price is around RM600 like tat smile.gif
limhongwoon
post Dec 5 2008, 08:42 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(cschun86 @ Dec 5 2008, 08:14 PM)
yup, I think so,
saw the flyer...

but for the Core i7 one,
better act fast,
just limited for 2 unit per company ^.^

not sure abt the C2D and C2Q.
I think no limit.
btw, the LCD real price is around RM600 like tat smile.gif
*
wad is flyer ??
u buy which model of core i7 ??
owikh84
post Dec 5 2008, 09:37 PM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(limhongwoon @ Dec 5 2008, 08:42 PM)
wad is flyer ??
u buy which model of core i7 ??
*
brochure like that bro
the bundle is attractive man since nowadays ppl r looking for a huge LCD
No more looking back at 19" whistling.gif
limhongwoon
post Dec 5 2008, 09:54 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(owikh84 @ Dec 5 2008, 10:37 PM)
brochure like that bro
the bundle is attractive man since nowadays ppl r looking for a huge LCD
No more looking back at 19"  whistling.gif
*
like 22" or 24 " lcd only
mmohdnor
post Dec 6 2008, 01:40 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
dissapointed (expected) ... couldnt grab a 22" fullhd lcd for myself ..
samsung 2233sw = RM599-630 ...some even sell at 679!
benq t2200hd = RM670-680

sad.gif i tot could get below rm600 for the 2233sw ... and why is benq so expensive one ..haih
** yeah im dreaming too much leh ...this is not lowyat anyway ...it's penang!

This post has been edited by mmohdnor: Dec 6 2008, 07:34 AM
overclockalbert
post Dec 6 2008, 03:15 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
» Click to show Spoiler - click again to hide... «


@meno,

2408wfp still around? blush.gif
overclockalbert
post Dec 6 2008, 03:17 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
» Click to show Spoiler - click again to hide... «


@fleechy,

mind to share where you get that QX??
TS@meno
post Dec 6 2008, 04:34 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
» Click to show Spoiler - click again to hide... «


Thanks for the support.
Well, everyone started as a newbie also...tongue.gif
In the other threads in this subforum, you should be able to find a lot of useful and relevant information in overclocking.
You're also welcomed to post your questions here and we'll see if we could give a pointer or 2.

Btw, i'm studying part time at IPG.

» Click to show Spoiler - click again to hide... «

After 5 pages only see ur post here.
You ask for V4, i started V4, and you came in only after so long...tongue.gif

Wei, the I7 one not a bad deal...Anyone actually bought one?

» Click to show Spoiler - click again to hide... «

Still sitting in my room beside the 3007wfp...drool.gif...
Waiting for my fren to come over to collect it on christmas week...
But if he backs off, i'll let you know ok.

» Click to show Spoiler - click again to hide... «

I was interested in asking that as well.
Btw, rams limiting the OC? Nvm, i have a solution here.
You sponsor your proc, we borrow Albert's mobo and i bring my rams.
Someone else bring a PSU and a small LCD. Then we do an OC gathering and see how far your QX can go...

This post has been edited by @meno: Dec 6 2008, 04:37 PM
metsatsu
post Dec 6 2008, 10:13 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(@meno @ Dec 2 2008, 11:34 PM)
You should have contacted me earlier...
Someone already reserved it...
I'll let you know if the buyer pulls out...
Haha, ya lucky you...
You have a 32"...My 27" will be everything for me, movies, games and browsing...
Maybe might consider switching to a 3008WFP if the price is right...
Btw, i do have a 3007WFP-HC under my custody for a week, so will try that out as well... tongue.gif

To me, 24" is the best size for PC. Not too big yet not too small. But after using 24" for some time, you'd feel like your inner heart telling you, hey, lets go for more...And thats when i ended up getting the 27"...
Btw, 1920x1080 on a 22" screen, won't it be a little small?

metsatsu,
Welcome, wanna post some pics of your rig? brows.gif
Btw, i found my dream rams already...On the way now...

Salim, ur Q9550 so fast arrived d? Mine took quite some time before reaching M'sia...Lucky you in getting an E0...I got a C1 when i ordered mine...Tempted to order another one just for the sake of E0... tongue.gif
*
that's cool bro. by the way, mind to share what rams are u getting? smile.gif

oh here's a couple of my rig's pic smile.gif

This post has been edited by metsatsu: Dec 6 2008, 10:14 PM


Attached thumbnail(s)
Attached Image Attached Image
TS@meno
post Dec 7 2008, 02:24 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(metsatsu @ Dec 6 2008, 10:13 PM)
that's cool bro. by the way, mind to share what rams are u getting? smile.gif

oh here's a couple of my rig's pic smile.gif
*
Wow, nice case there...
The Mystique.
Btw, i got myself some Team Xtreem DDR800 CL3...
Haven't tested them, but they are rated to do DDR800 CL3-3-3-8@2.2v-2.35v.
I'm expecting DDR1200 at CL4 but ain't gonna test that until i get my EP45-Extreme back...
metsatsu
post Dec 7 2008, 01:34 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(@meno @ Dec 7 2008, 02:24 AM)
Wow, nice case there...
The Mystique.
Btw, i got myself some Team Xtreem DDR800 CL3...
Haven't tested them, but they are rated to do DDR800 CL3-3-3-8@2.2v-2.35v.
I'm expecting DDR1200 at CL4 but ain't gonna test that until i get my EP45-Extreme back...
*
not so nice when it comes to size. always considering upgrading to 4870 x2 but had to withdraw my decision due to size of the case. sad.gif
zs3889
post Dec 7 2008, 11:14 PM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
blink.gif just trying to ask and figure out something...

what's the best GC that can overclock with intel e2160...??

the budget is about rm250+-...

i dont know whether this is a right question to ask or not...but im a noob indeed... rclxub.gif blink.gif doh.gif
OC4/3
post Dec 7 2008, 11:21 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(@meno @ Dec 7 2008, 02:24 AM)
Wow, nice case there...
The Mystique.
Btw, i got myself some Team Xtreem DDR800 CL3...
Haven't tested them, but they are rated to do DDR800 CL3-3-3-8@2.2v-2.35v.
I'm expecting DDR1200 at CL4 but ain't gonna test that until i get my EP45-Extreme back...
*
I demand pictar for the team xtreem 800cl3 drool.gif
» Click to show Spoiler - click again to hide... «
metsatsu
post Dec 8 2008, 07:27 AM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(OC4/3 @ Dec 7 2008, 11:21 PM)
I demand pictar for the team xtreem 800cl3 drool.gif
» Click to show Spoiler - click again to hide... «

*
agree biggrin.gif
mfcm
post Dec 8 2008, 09:49 AM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
wahloa..adrian u get from cstkl1 or rlch17?nice ram :clap; fast fast push it rclxm9.gif
ktek
post Dec 8 2008, 10:53 AM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
QUOTE(zs3889 @ Dec 7 2008, 11:14 PM)
blink.gif just trying to ask and figure out something...
what's the best GC that can overclock with intel e2160...??
the budget is about rm250+-...
i dont know whether this is a right question to ask or not...but im a noob indeed... rclxub.gif  blink.gif  doh.gif
*

graphic card will never overclock with intel e2160 or whatever shakehead.gif
since your budget is low; ATi Radeon 4650, below RM300.
gsan
post Dec 8 2008, 11:10 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(@meno @ Dec 7 2008, 02:24 AM)
Wow, nice case there...
The Mystique.
Btw, i got myself some Team Xtreem DDR800 CL3...
Haven't tested them, but they are rated to do DDR800 CL3-3-3-8@2.2v-2.35v.
I'm expecting DDR1200 at CL4 but ain't gonna test that until i get my EP45-Extreme back...
*
finally some stuff that come out interesting me brows.gif
TS@meno
post Dec 8 2008, 11:59 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
» Click to show Spoiler - click again to hide... «


Stay Tuned guys...
I'm having a paper later a 3pm, then going back to work...cry.gif
Maybe after tomorrow i'll have some time to post some pics and some screenies...

Btw OC4/3, your D9GKX are nice also...Any screenies of it running at max FSB? brows.gif

QUOTE(mfcm @ Dec 8 2008, 09:49 AM)
wahloa..adrian u get from cstkl1 or rlch17?nice ram :clap; fast fast push it rclxm9.gif
*
Wahlau, even who has these rams in LYN also u memorised ar?
U shd know who i got it from cz i got only a pair...
Wanted the 2 pairs, but was late, sold to some German guy i heard...
mfcm
post Dec 8 2008, 05:33 PM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
ic..haha dat oso my dream ram lastime..huhu but doesnt hv cash dat time..u really lucky can hv it vmad.gif
PowerSlide
post Dec 8 2008, 07:05 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
mfcm,

apa u pok pek pok pek..u play ddr3 now no need be so humble..i know inside your heart u say "chet ddr2 jer, cheapo stuff"

tongue.gif tongue.gif tongue.gif

guys,

where to buy acrylic cutter? its like a penknife..wana do sikit mod lagi blush.gif
sonicscourge
post Dec 8 2008, 10:31 PM

Casual
***
Junior Member
436 posts

Joined: May 2006
QUOTE(mfcm @ Dec 8 2008, 05:33 PM)
ic..haha dat oso my dream ram lastime..huhu but doesnt hv cash dat time..u really lucky can hv it vmad.gif
*
WTFruitcake? LU LAST TIME DREAM RAM xde CASH? wahlao....u no cash i mar lagi teruk....
Sien, my rig dormant 1 month liaw....zzzz
mfcm
post Dec 8 2008, 11:01 PM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
QUOTE(PowerSlide @ Dec 8 2008, 07:05 PM)
mfcm,

apa u pok pek pok pek..u play ddr3 now no need be so humble..i know inside your heart u say "chet ddr2 jer, cheapo stuff"

tongue.gif  tongue.gif  tongue.gif

guys,

where to buy acrylic cutter? its like a penknife..wana do sikit mod lagi  blush.gif
*
aduh..didnt play with new techno anymore..haha need to fund for future now nod.gif
erm u can ask the arcylic cutter at hardware shop bro..RM10-15 oni

QUOTE(sonicscourge @ Dec 8 2008, 10:31 PM)
WTFruitcake? LU LAST TIME DREAM RAM xde CASH? wahlao....u no cash i mar lagi teruk....
Sien, my rig dormant 1 month liaw....zzzz
*
u play too much power stuff..dats y delay alot laugh.gif
OC4/3
post Dec 8 2008, 11:43 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(@meno @ Dec 8 2008, 11:59 AM)
» Click to show Spoiler - click again to hide... «


Stay Tuned guys...
I'm having a paper later a 3pm, then going back to work...cry.gif
Maybe after tomorrow i'll have some time to post some pics and some screenies...

Btw OC4/3, your D9GKX are nice also...Any screenies of it running at max FSB? brows.gif
Wahlau, even who has these rams in LYN also u memorised ar?
U shd know who i got it from cz i got only a pair...
Wanted the 2 pairs, but was late, sold to some German guy i heard...
*
My GKX ah,never max out before laugh.gif
I feel it can do DDR 2 1200 CL4 through laugh.gif
metsatsu
post Dec 9 2008, 05:52 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(OC4/3 @ Dec 8 2008, 11:43 PM)
My GKX ah,never max out before laugh.gif
I feel it can do DDR 2 1200 CL4 through laugh.gif
*
we'll probably be looking at some insane voltage for that setting. shocking.gif
mfcm
post Dec 9 2008, 05:52 PM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
nice clock bro if lidat..btw here wat i jus got drool.gif
» Click to show Spoiler - click again to hide... «
metsatsu
post Dec 9 2008, 06:16 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(mfcm @ Dec 9 2008, 05:52 PM)
nice clock bro if lidat..btw here wat i jus got drool.gif
» Click to show Spoiler - click again to hide... «

*
why post the picture of the ram itself. post some screenshots la drool.gif drool.gif
TS@meno
post Dec 9 2008, 07:19 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(mfcm @ Dec 9 2008, 05:52 PM)
nice clock bro if lidat..btw here wat i jus got drool.gif
» Click to show Spoiler - click again to hide... «

*
Chegu nie dasat tul...
9600 or 10400?

Mak ai, kalah aku nyer CAS 3...Cis... grumble.gif grumble.gif grumble.gif
mfcm
post Dec 9 2008, 08:52 PM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
@met
sorry jus pick up from my fren..didnt able to push it yet..mayb later when free nod.gif

@meno
mana ada..ko pnya lagi power tuh..CL3..aku nye PC8500 CL4 je

This post has been edited by mfcm: Dec 9 2008, 08:53 PM
OC4/3
post Dec 10 2008, 12:35 AM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(mfcm @ Dec 9 2008, 05:52 PM)
nice clock bro if lidat..btw here wat i jus got drool.gif
» Click to show Spoiler - click again to hide... «

*
Damm dammm............My dream ram drool.gif
This is some freaking nicely bin D9GKX/D9GMH,any naked pictar drool.gif
TS@meno
post Dec 10 2008, 09:46 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(OC4/3 @ Dec 10 2008, 12:35 AM)
Damm dammm............My dream ram drool.gif
This is some freaking nicely bin D9GKX/D9GMH,any naked pictar drool.gif
*
Those are GMHs... brows.gif
Btw, PC8500 CL4? Since when they have Thermalright version?
I thought only the PC9600 and above???
mfcm
post Dec 10 2008, 10:04 AM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
got bro..old version nod.gif btw those not gmh..those stick GKX icon_rolleyes.gif
TS@meno
post Dec 10 2008, 01:02 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(mfcm @ Dec 10 2008, 10:04 AM)
got bro..old version nod.gif btw those not gmh..those stick GKX icon_rolleyes.gif
*
Hmm, wierd.
I tot the GKX sticks were supposed to come with black color PCB.
Btw, mau jual?
Aku nak...
mmohdnor
post Dec 11 2008, 01:15 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
errr ... any of u guys selling off ur 19", 20" or 22" lcd ?
my max budget is rm550 only, so with current lcd price in penang, there's no way i can grab anything bigger than 20" lcd ..
i guess i wud have to stick with 17" or 19" for now blush.gif
knew any good deal around?

This post has been edited by mmohdnor: Dec 11 2008, 01:23 AM
salimbest83
post Dec 11 2008, 09:55 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(mmohdnor @ Dec 11 2008, 01:15 AM)
errr ... any of u guys selling off ur 19", 20" or 22" lcd ?
my max budget is rm550 only, so with current lcd price in penang, there's no way i can grab anything bigger than 20" lcd ..
i guess i wud have to stick with 17" or 19" for now  blush.gif
knew any good deal around?
*
who say u cant..
coz i just saw one shop selling benq 22" @Rm565 at PC fair..
dont remember which shop la.. laugh.gif
mmohdnor
post Dec 11 2008, 10:13 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
yeah, i was aiming for benq t2200hd an samsung 2233sw ... but i didnt manage to find a good deal during pcfair man ... they were selling samsung 2233sw for 600 (some even sells at 620, 679, 689!) ... and by the time i decided to grab the 600 ones, they say no stock ady
some lucky forumers managed to get it for 575 too

This post has been edited by mmohdnor: Dec 11 2008, 10:14 AM
danieljoey
post Dec 12 2008, 09:10 AM

ǝᴉqooN
******
Senior Member
1,284 posts

Joined: Oct 2007
From: 槟城 - Penang Island Status: Un-Owned
Why no pcfair pretty girls pic this time?? whistling.gif

This post has been edited by danieljoey: Dec 12 2008, 11:39 AM
iBenQ
post Dec 12 2008, 11:56 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
noticed the girls giving out free game cds?? nice cosplayer @@... made me listen to their advertisement... other ppl give paper i ignore oni tongue.gif
gsan
post Dec 13 2008, 11:22 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
FYI, I found that Lian Li casing at one of the shop in megamall, pacific.
ktek
post Dec 14 2008, 11:59 PM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
QUOTE(gsan @ Dec 13 2008, 11:22 AM)
FYI, I found that Lian Li casing at one of the shop in megamall, pacific.
*

the one with Logitech signboard? unsure.gif
salimbest83
post Dec 15 2008, 08:12 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(danieljoey @ Dec 12 2008, 09:10 AM)
Why no pcfair pretty girls pic this time??  whistling.gif
*
i think girls at maxis booth quite cute la..
wearing Christmas Suit.. blush.gif

cschun86
post Dec 15 2008, 11:33 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
sorry lo @meno for reporting late,
busy recently for FYP and part-time,
no time to check too much lyn,
did check few times in the price and dealer guide section,
didnt notice the thread has been moved to overclock united mah...

Guys, any advantages going Q6600 to Q9550?
and how much the good x58 mobo and DDR3 ram lying around?
already cant catch up lately coz didnt check much...
salimbest83
post Dec 15 2008, 11:54 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
any board for i7 that can consider cheap for now..?
emm..
920 so cheap la ..is it right @meno.? wink.gif.
even cheaper than my q9550..
TS@meno
post Dec 15 2008, 11:58 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(salimbest83 @ Dec 15 2008, 11:54 AM)
any board for i7 that can consider cheap for now..?
emm..
920 so cheap la ..is it right @meno.? wink.gif.
even cheaper than my q9550..
*
Lol...
I need an X58 board too if anyone has one available cheap.
Willing to trade+ top up with my Ep45 Extreme... laugh.gif
Btw, if i were to go for i7, need to let go of my Q9550 also...sad.gif

Ya, i7 price is crazy...Making me drool only.
salimbest83
post Dec 15 2008, 12:00 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
yeap.. u can try post out new topic for ur hardware..hehe
limhongwoon
post Dec 15 2008, 12:02 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(@meno @ Dec 15 2008, 12:58 PM)
Lol...
I need an X58 board too if anyone has one available cheap.
Willing to trade+ top up with my Ep45 Extreme... laugh.gif
Btw, if i were to go for i7, need to let go of my Q9550 also...sad.gif

Ya, i7 price is crazy...Making me drool only.
*
how much the core i7 ??
mfcm
post Dec 15 2008, 12:03 PM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
haha dem now POC oredi talk bout i7..im still on c2d cry.gif

adrian got any superb deal for lcd? brows.gif
coolice
post Dec 15 2008, 12:43 PM

Team OCD!
******
Senior Member
1,857 posts

Joined: Sep 2004
From: ocdrift.com
adrian..did u get my msg?im looking for some hardware biggrin.gif
cschun86
post Dec 15 2008, 12:57 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
adrian, where you korek the 920?
how much u got it?

coolice, what else u buying wor?
except the one u asking me tongue.gif
TS@meno
post Dec 15 2008, 02:30 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
» Click to show Spoiler - click again to hide... «

i7 920?
I also hope i can get it...tongue.gif
Price dunno yet, but should be slightly cheaper than market from what me ans Salim know.
Not much difference actually, but cheaper then when me and him got our Q9550, so feel rugi buying the 9550 now...tongue.gif

Chun, Coolice finding a legendary item...See if i can help him...tongue.gif
QUOTE(coolice @ Dec 15 2008, 12:43 PM)
adrian..did u get my msg?im looking for some hardware biggrin.gif
*
Just sent you a PM...
Haiya, if u want it, cheap cheap only lar...U give me 1 i7 i give it to you...tongue.gif
JKJK...

QUOTE(mfcm @ Dec 15 2008, 12:03 PM)
haha dem now POC oredi talk bout i7..im still on c2d cry.gif

adrian got any superb deal for lcd? brows.gif
*
Talk only, wait till someone really get it...
I dun think i'll be getting it, budget constraint, lagi the Q9550 serving me pretty well d, no point upgrading...
Need to fork out for new mobo and rams lagi.
I'd rather keep the cash and wait for HD4870 to drop in price...tongue.gif
Btw LCD, no superb deal lar...Since when i got superb deal for LCD? rclxub.gif
mfcm
post Dec 15 2008, 02:41 PM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
QUOTE(coolice @ Dec 15 2008, 12:43 PM)
adrian..did u get my msg?im looking for some hardware biggrin.gif
*
ntah la adrian nih..msn online..bila msn dia xdak reply pn..takkan dok stdy nk exam lagi kot doh.gif shakehead.gif laugh.gif

This post has been edited by mfcm: Dec 15 2008, 02:41 PM
iBenQ
post Dec 15 2008, 07:30 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(@meno @ Dec 15 2008, 11:58 AM)
Lol...
I need an X58 board too if anyone has one available cheap.
Willing to trade+ top up with my Ep45 Extreme... laugh.gif
Btw, if i were to go for i7, need to let go of my Q9550 also...sad.gif

Ya, i7 price is crazy...Making me drool only.
*
if u letting go ur proc, do pm me yeah... interested in it
u can try selling ur mobo to advantech at bj... provided ur mobo has the warranty sticker like buildtron... otherwise he's not interested in it...
u can get some good price for i7 at smart technology solutions in bj too...
salimbest83
post Dec 16 2008, 08:19 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(limhongwoon @ Dec 15 2008, 12:02 PM)
how much the core i7 ??
*
for now u can get for usd142 or 147 not remember..provided u know the right person biggrin.gif

Added on December 16, 2008, 8:22 am
QUOTE(mfcm @ Dec 15 2008, 12:03 PM)
haha dem now POC oredi talk bout i7..im still on c2d cry.gif

adrian got any superb deal for lcd? brows.gif
*
no worry bro..
i oso sticking wif my C2Q till next year la..
will start saving for Intel X-25M..
can get at least usd299..(Rm1K plus oredi)

This post has been edited by salimbest83: Dec 16 2008, 08:22 AM
limhongwoon
post Dec 16 2008, 08:22 AM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(salimbest83 @ Dec 16 2008, 09:19 AM)
for now u can get for usd142 or 147 not remember..provided u know the right person  biggrin.gif
*
last time not usd 399 ?? where can i get it ??
cschun86
post Dec 16 2008, 12:08 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(salimbest83 @ Dec 16 2008, 08:19 AM)
for now u can get for usd142 or 147 not remember..provided u know the right person  biggrin.gif

Added on December 16, 2008, 8:22 am

no worry bro..
i oso sticking wif my C2Q till next year la..
will start saving for Intel X-25M..
can get at least usd299..(Rm1K plus oredi)
*
QUOTE(limhongwoon @ Dec 16 2008, 08:22 AM)
last time not usd 399 ?? where can i get it ??
*
thats intel's staff purchase unit,
only the staff purchase would get such price lar..
not everyone can get it and staff got limit for 3 processor per year...
maybe salimbest83 is intel's worker? hehe tongue.gif
salimbest83
post Dec 16 2008, 12:22 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(cschun86 @ Dec 16 2008, 12:08 PM)
thats intel's staff purchase unit,
only the staff purchase would get such price lar..
not everyone can get it and staff got limit for 3 processor per year...
maybe salimbest83 is intel's worker? hehe tongue.gif
*
yep..
thats just for intel staff only la..
even when im still working at intel, i cant bought even one..haish..
no credit card meh..
mfcm
post Dec 16 2008, 04:46 PM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
wooo nice ah salim..then fast2 apply CC..then can order lar laugh.gif nidzamputra the forumer here oso ur fren ah?he form kuala ketil oso same like u working in intel iinm tongue.gif

hmm u oredi on C2Q..that oredi better than mine lor..myb need to say bye.gifbye.gif
mmohdnor
post Dec 16 2008, 05:33 PM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
hey, im in intel too ... and still cant buy one for myself ... tongue.gif
but that's becoz i dun have the money ...wahaha

This post has been edited by mmohdnor: Dec 16 2008, 09:20 PM
tapirus
post Dec 16 2008, 11:45 PM

(︶ε︶メ)╭∩╮ a�tE(R)isk
******
Senior Member
1,237 posts

Joined: Jul 2006
From: espie-prai
QUOTE(mmohdnor @ Dec 16 2008, 05:33 PM)
hey, im in intel too  ...  and still cant buy one for myself ... tongue.gif
but that's becoz i dun have the money ...wahaha
*
then me give me my money..u can buy for me...hehe..
salimbest83
post Dec 17 2008, 09:14 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(mfcm @ Dec 16 2008, 04:46 PM)
wooo nice ah salim..then fast2 apply CC..then can order lar laugh.gif nidzamputra the forumer here oso ur fren ah?he form kuala ketil oso same like u working in intel iinm tongue.gif

hmm u oredi on C2Q..that oredi better than mine lor..myb need to say bye.gifbye.gif
*
not sure ahh..
never met before..
BTW i oredi left Intel.. smile.gif really missed my day and my friend back there.
now oredi work at Penang .

Actually C2Q wont do any good for most of us.. including me..
coz even when gaming (GRID, COD5, L4D) cpu usage just around 25% only..

and DOTa ( yeah..im still playing at home..wif AI ler) just using around 5-10% only..
blush.gif

Added on December 17, 2008, 9:16 am
QUOTE(mmohdnor @ Dec 16 2008, 05:33 PM)
hey, im in intel too  ...  and still cant buy one for myself ... tongue.gif
but that's becoz i dun have the money ...wahaha
*
erm.. how bout Maybank Debit card..
try ask Intel Shop la..
maybe can use..

This post has been edited by salimbest83: Dec 17 2008, 09:16 AM
cschun86
post Dec 17 2008, 10:07 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(salimbest83 @ Dec 17 2008, 09:14 AM)
not sure ahh..
never met before..
BTW i oredi left Intel.. smile.gif  really missed my day and my friend back there.
now oredi work at Penang .

Actually C2Q wont do any good for most of us.. including me..
coz even when gaming (GRID, COD5, L4D) cpu usage just around 25% only..

and DOTa ( yeah..im still playing at home..wif AI ler) just using around 5-10% only..
blush.gif

Added on December 17, 2008, 9:16 am

erm.. how bout Maybank Debit card..
try ask Intel Shop la..
maybe can use..
*
Intel shop website actually already shut down,
need to phone to US side to order one for now...
mmohdnor
post Dec 17 2008, 10:20 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
not about credit /debit card ... but no money to buy leh ..
just got myself a 22" samsung 2233sw biggrin.gif

yup u're right now staff can't buy cpus thru website ady ...it's currently shutdown
TS@meno
post Dec 18 2008, 05:56 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(mmohdnor @ Dec 17 2008, 10:20 AM)
not about credit /debit card ... but no money to buy leh ..
just got myself a 22" samsung 2233sw biggrin.gif

yup u're right now staff can't buy cpus thru website ady ...it's currently shutdown
*
I tried to call my friend just now and they told me it's close for good already.
Even phone services is no longer available.
Anyone could confirm this?

Btw Salim, where did you get the price list?
I couldn't get it since the web is down already.
hahn87
post Dec 18 2008, 06:34 PM

Enthusiast
*****
Senior Member
820 posts

Joined: Apr 2006
From: Klang Valley | Penang | Sungai Petani


i just got a QX9650 last nite and trying to clock it.. no 4ghz 10x400mhz 1.386v kenot pass prime95 test lar... aduh.. pening!! this vcore ady very hot u know >< stress load at 80c on my freezer extreme T_T
any suggestion>?

btw hello... new here... kedah ppl study penang.

letting go my E8600. processor only with no stock cooler (gave friend liao not good if ask for it back lar ><) anybody interested?
oh yah.. letting go my biostar tpower i45 motherboard also after i got enuf money buy new motherboard and send it to rma. let me know if anybody interested also =D

This post has been edited by hahn87: Dec 18 2008, 08:56 PM
OC4/3
post Dec 18 2008, 09:24 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(hahn87 @ Dec 18 2008, 06:34 PM)
i just got a QX9650 last nite and trying to clock it.. no 4ghz 10x400mhz 1.386v kenot pass prime95 test lar... aduh.. pening!! this vcore ady very hot u know >< stress load at 80c on my freezer extreme T_T
any suggestion>?

btw hello... new here... kedah ppl study penang.

letting go my E8600. processor only with no stock cooler (gave friend liao not good if ask for it back lar ><) anybody interested?
oh yah.. letting go my biostar tpower i45 motherboard also after i got enuf money buy new motherboard and send it to rma. let me know if anybody interested also =D
*
Letting go E8600???UGPM then but is it sold as retail due to no cooler tongue.gif
salimbest83
post Dec 19 2008, 08:20 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(@meno @ Dec 18 2008, 05:56 PM)
I tried to call my friend just now and they told me it's close for good already.
Even phone services is no longer available.
Anyone could confirm this?

Btw Salim, where did you get the price list?
I couldn't get it since the web is down already.
*
emm..
my friend oso told me bout Intel Shop will be close.
so its true la..

lucky me coz bought its earlier..
got the pricelist from him.

BTW Intel Kulim will shutdown till next year edy..
haish. shocking.gif .
TS@meno
post Dec 19 2008, 09:25 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(salimbest83 @ Dec 19 2008, 08:20 AM)
emm..
my friend oso told me bout Intel Shop will be close.
so its true la..

lucky me coz bought its earlier..
got the pricelist from him.

BTW Intel Kulim will shutdown till next year edy..
haish. shocking.gif .
*
Haha, i guess we might have caught the last train.

Btw, ur E0, no 4Ghz eh?
My 9550 is still a virgin, unoverclocked since day 1...
I'm starting to lose patience waiting for my board to be back at Jack's place.
Called him multiple times, but everytime no good news...Scanart Data Systems (SDS) sucks...Slow RMA...It's been more than a month already since item sent to them...IMHO, it's a bit too much taking more than 1 month to repair or replace an RM1k mobo... vmad.gif

salimbest83
post Dec 19 2008, 11:38 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(@meno @ Dec 19 2008, 09:25 AM)
Haha, i guess we might have caught the last train.

Btw, ur E0, no 4Ghz eh?
My 9550 is still a virgin, unoverclocked since day 1...
I'm starting to lose patience waiting for my board to be back at Jack's place.
Called him multiple times, but everytime no good news...Scanart Data Systems (SDS) sucks...Slow RMA...It's been more than a month already since item sent to them...IMHO, it's a bit too much taking more than 1 month to repair or replace an RM1k mobo... vmad.gif
*
hah.. lucky.
actually can do 4Ghz but my AC 64 Pro cant keep up with the heat lvl..even just using 1.37vcore
here some screenie


Attached thumbnail(s)
Attached Image
TS@meno
post Dec 19 2008, 12:28 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(salimbest83 @ Dec 19 2008, 11:38 AM)
hah.. lucky.
actually can do 4Ghz but my AC 64 Pro cant keep up with the heat lvl..even just using 1.37vcore
here some screenie
*
The temps seem pretty fine to me, hovering aroun 60+ degrees on such load on a HSF which was not even suited for it is not bad at all.
Finding new cooler? Interested in my IFX-14? brows.gif
salimbest83
post Dec 19 2008, 12:42 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(@meno @ Dec 19 2008, 12:28 PM)
The temps seem pretty fine to me, hovering aroun 60+ degrees on such load on a HSF which was not even suited for it is not bad at all.
Finding new cooler? Interested in my IFX-14? brows.gif
*
nope..thats just running for 5s only..
after 5 mins its oredi past 80C..
IFX too big la..

eyeing CCF for now.. brows.gif
OC4/3
post Dec 19 2008, 01:49 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(hahn87 @ Dec 18 2008, 06:34 PM)
i just got a QX9650 last nite and trying to clock it.. no 4ghz 10x400mhz 1.386v kenot pass prime95 test lar... aduh.. pening!! this vcore ady very hot u know >< stress load at 80c on my freezer extreme T_T
any suggestion>?

btw hello... new here... kedah ppl study penang.

letting go my E8600. processor only with no stock cooler (gave friend liao not good if ask for it back lar ><) anybody interested?
oh yah.. letting go my biostar tpower i45 motherboard also after i got enuf money buy new motherboard and send it to rma. let me know if anybody interested also =D
*
BTW,retail processor without stock cooler=Pretty much OEM laugh.gif
cschun86
post Dec 19 2008, 02:47 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
The calling order for processor shut down for few days due to bad whether at US there,
there have winter storm (snow and ice),
so, most of the people over there work from home for safety purpose,
they expect the weather will be continue or worsen over next week.
hahn87
post Dec 19 2008, 05:58 PM

Enthusiast
*****
Senior Member
820 posts

Joined: Apr 2006
From: Klang Valley | Penang | Sungai Petani


overclocked my QX9650 to 4ghz. i think i need a better setting.. this vcore is a bit too high and the temperature is.... shakehead.gif
going to change better motherboard when i got the cash.
have a look at the temp. not in aircond room as u can see mobo temp 28C
» Click to show Spoiler - click again to hide... «

look at the vdrop. is this normal? i am fairly new to overclocking.. i keep feeding it voltage till it got stable... previously at 1.386v prime95 small fft test 5minutes core #4 fail jor =.=
so far this setting stable
» Click to show Spoiler - click again to hide... «

cooled down with arctic cooling freezer xtreme... at this temperature i feel the need of water cooling shakehead.gif but no cash cry.gif

appreciate all the help i can get.

and my E8600 the exact stock cooler i can get it back. just give me some time =D

This post has been edited by hahn87: Dec 19 2008, 05:59 PM
iBenQ
post Dec 19 2008, 06:01 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
saw ur cooler... 'nice' temp -____-... try going for water cooling+peltier brows.gif

This post has been edited by iBenQ: Dec 19 2008, 06:02 PM
hahn87
post Dec 19 2008, 06:11 PM

Enthusiast
*****
Senior Member
820 posts

Joined: Apr 2006
From: Klang Valley | Penang | Sungai Petani


i wan..... money big issue lar
custom swiftech set not cheap man...

ohh did anybody saw the sapphire 4870X2 atomic? comes preinstall with water cooling and cpu water block included.. pretty cool and perform pretty good too. OCC site got review
OMG GTX295. retail cheaper than 4870X2.. omgomgomg ati kena pawn back ><

This post has been edited by hahn87: Dec 19 2008, 06:36 PM
metsatsu
post Dec 21 2008, 10:18 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(salimbest83 @ Dec 19 2008, 12:42 PM)
nope..thats just running for 5s only..
after 5 mins its oredi past 80C..
IFX too big la..

eyeing CCF for now.. brows.gif
*
so how's your 3.94ghz load temp now?
salimbest83
post Dec 22 2008, 07:59 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(metsatsu @ Dec 21 2008, 10:18 PM)
so how's your 3.94ghz load temp now?
*
now just running @ 2.94Ghz only..
oredi sold my AC F 64..
using that small stock HSF..

**running OCCT @3.94GHz give me around 75-80C before...but normal use +games just hovering around 55C only..
TS@meno
post Dec 22 2008, 03:28 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(salimbest83 @ Dec 22 2008, 07:59 AM)
now just running @ 2.94Ghz only..
oredi sold my AC F 64..
using that small stock HSF..

**running OCCT @3.94GHz give me around 75-80C before...but normal use +games just hovering around 55C only..
*
Bro, saw tat u got the Kingbox from Memkingdom.
How good are those rams?
I heard kucingfight got DDR1000 5-5-5-18 at 2.0v, u think it's possible to go beyond tat, was thinking of giving them a try.
salimbest83
post Dec 22 2008, 04:08 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(@meno @ Dec 22 2008, 03:28 PM)
Bro, saw tat u got the Kingbox from Memkingdom.
How good are those rams?
I heard kucingfight got DDR1000 5-5-5-18 at 2.0v, u think it's possible to go beyond tat, was thinking of giving them a try.
*
erm..
not tested at that speed yet..
coz i hate my MSi mobo..always forced me to reset CMOS when changing Mem setting..
sometime even when changing just 5Mhz oso hang or cant enter windows
but if left to Auto.. its usually run fine...
metsatsu
post Dec 24 2008, 12:03 AM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(salimbest83 @ Dec 22 2008, 07:59 AM)
now just running @ 2.94Ghz only..
oredi sold my AC F 64..
using that small stock HSF..

**running OCCT @3.94GHz give me around 75-80C before...but normal use +games just hovering around 55C only..
*
So i guess it is the cooler that let u down. Coz for that vcore at 3.94ghz, that's quite good. Mine 1.375v 3.75ghz. Either the cpu and mobo combo that gives such vcore requirement or the proc itself not very good.
salimbest83
post Dec 24 2008, 08:04 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(metsatsu @ Dec 24 2008, 12:03 AM)
So i guess it is the cooler that let u down. Coz for that vcore at 3.94ghz, that's quite good. Mine 1.375v 3.75ghz. Either the cpu and mobo combo that gives such vcore requirement or the proc itself not very good.
*
yeap.. still cant make a choice..
wanna gett CCF or change my bike's RIM..

oso..
roadtax for my LC oso end in 3week..
ppl said this year insurance going up 100% shocking.gif

last year i paid nearly RM300..
maybe more than RM400 this time.. rclxub.gif
lohwenli
post Dec 25 2008, 03:47 AM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
QUOTE(iBenQ @ Dec 19 2008, 06:01 PM)
saw ur cooler... 'nice' temp -____-... try going for water cooling+peltier brows.gif
*
Peltiers are not really useful for anything that puts out more than 100W heat, to get enough cooling the peltier will need to be excessively powerful; to the point where even water cooling will have trouble. Couple with the problems of condensation, you might as well go phase change. The only advantage is a WC+pelt system is much lighter to carry around.

QUOTE(hahn87 @ Dec 19 2008, 06:11 PM)
i wan..... money big issue lar
custom swiftech set not cheap man...

ohh did anybody saw the sapphire 4870X2 atomic? comes preinstall with water cooling and cpu water block included.. pretty cool and perform pretty good too. OCC site got review
OMG GTX295. retail cheaper than 4870X2.. omgomgomg ati kena pawn back ><
*
I wouldn't really call it pawn..production cost for ATI 48xx series is much lower than nvidia 200 series, yields are better for 48xx series too. It would be a simple matter for ATI to reduce price anytime, while nvidia is already at the limit. And while yes, nvidia has the performance crown again, graphic card development is faster than CPU, ATI will be launching their next model in a matter of months, definitely within the next 6 months. And it'll be 40nm, for the first time GPU manufacturing technology surpasses CPU manufacturing (Intel is going 32nm only end of 2009, AMD in 2010).

Phenom II rocks btw. 6+GHZ OC by AMD, and at least 4.6GHz by other parties. Using LN2, of course. Can't wait for it to be officially out. AMD's not taking any performance crowns with it, but at least they'll be back in the playing field. Right now they're pretty much just hanging on sidelines.
salimbest83
post Dec 31 2008, 12:02 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
POC dead oredi ah..?
where did all ppl go?
PowerSlide
post Dec 31 2008, 01:02 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
all ppl cari duit..if not no money buy pc stuff tongue.gif

guys, where in penang got good price for razer goliathus mousepad?
AceCombat
post Dec 31 2008, 03:00 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Q9450 4GHz user reporting in biggrin.gif
i7 coming next month biggrin.gif
stay tuned rclxms.gif
sonicscourge
post Dec 31 2008, 03:08 PM

Casual
***
Junior Member
436 posts

Joined: May 2006
i7 when u getting @ce meimei? LOL

HAPPY NEW YEAR TO ALL!!!! zzzz
pokok86
post Jan 1 2009, 01:43 AM

Getting Started
**
Junior Member
235 posts

Joined: Jan 2007
From: Kedah----Penang
now who r using i7?
can show up?

HAPPY NEW YEAR 2009
hahn87
post Jan 1 2009, 02:38 PM

Enthusiast
*****
Senior Member
820 posts

Joined: Apr 2006
From: Klang Valley | Penang | Sungai Petani


haih too bad PC build a bit early.. if not i oso go for i7 setup already
anyway i lower my OC to 3.6ghz ady... too much power and too much heat =.=
might save up 1k+ to get swiftech WC setup.. 3x 12cm rad. apogee GTZ. pump and resevior....
but these really have to wait..... cash dun come easy... i'm still a student =.= and i need a part time job.....
anyway something i dun understand about water cooling... u fill it with 100% coolant or need to mix with distilled water?
and distilled water..... rain water? boiled water? or need to buy?

also consider lapping my my freezer extreme... penang who got do and how much... and how long does it takes.. coz i dun have stock cooler

This post has been edited by hahn87: Jan 1 2009, 02:44 PM
lohwenli
post Jan 2 2009, 05:42 AM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
Happy New Year everybody!

Just came back from KL with a baby dinosaur..
cschun86
post Jan 2 2009, 11:24 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
haha,
ace meimei, once passed 2009, so fast use the quota to get this year processor already?
which model u are getting? biggrin.gif

many POC member retired liao,
like me is one of those tongue.gif

Added on January 2, 2009, 11:27 am
QUOTE(hahn87 @ Jan 1 2009, 02:38 PM)
haih too bad PC build a bit early.. if not i oso go for i7 setup already
anyway i lower my OC to 3.6ghz ady... too much power and too much heat =.=
might save up 1k+ to get swiftech WC setup.. 3x 12cm rad. apogee GTZ. pump and resevior....
but these really have to wait.....  cash dun come easy... i'm still a student =.= and i need a part time job.....
anyway something i dun understand about water cooling... u fill it with 100% coolant or need to mix with distilled water?
and distilled water..... rain water? boiled water? or need to buy?

also consider lapping my my freezer extreme... penang who got do and how much... and how long does it takes.. coz i dun have stock cooler
*
it is mix with distriller water,
that one is add for colouring effect tongue.gif

for lapping,
maybe you can find ace mei mei if "she" is free tongue.gif
not sure she kira you cheap or expensive...
if she is free, should be done in half day...

This post has been edited by cschun86: Jan 2 2009, 11:27 AM
TS@meno
post Jan 2 2009, 11:30 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(lohwenli @ Jan 2 2009, 05:42 AM)
Happy New Year everybody!

Just came back from KL with a baby dinosaur..
*
What sort of a dinosaur is that? laugh.gif

Btw everyone, Happy new year!!! thumbup.gif thumbup.gif thumbup.gif
salimbest83
post Jan 2 2009, 12:15 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
im oso kinda retired oredi..
just left all setting to auto in bios..
including auto Overclock...got 3.3Ghz under load..
(just using stock fan ony)

kinda afraid coz my Core temp show my Core 0 temp always 10C higher than other core..idle and load

like Core 0=69C and Core 1,2,3=just 59C
is it my proc wanna die edy?
lohwenli
post Jan 2 2009, 01:28 PM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
QUOTE(@meno @ Jan 2 2009, 11:30 AM)
What sort of a dinosaur is that? laugh.gif

Btw everyone, Happy new year!!! thumbup.gif  thumbup.gif  thumbup.gif
*
Female one..

Speaking of retired..I'm kinda comin out of 'retirement'. But going slower now, getting old d laugh.gif
metsatsu
post Jan 2 2009, 06:36 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(salimbest83 @ Jan 2 2009, 12:15 PM)
im oso kinda retired oredi..
just left all setting to auto in bios..
including auto Overclock...got 3.3Ghz under load..
(just using stock fan ony)

kinda afraid coz my Core temp show my Core 0 temp always 10C higher than other core..idle and load

like Core 0=69C and Core 1,2,3=just 59C
is it my proc wanna die edy?
*
i'm getting the same thing also. though not as bad as yours. but my least temperature reading is 8c less than the highest one. but it changes when i remount my hsf. so i think it's the hsf position's problem
zs3889
post Jan 3 2009, 12:26 AM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
Hi all penang guys here, wish you guys could give some help to me..

im looking for Jack, from Precess Bj, is he still around here?? or anyone has any idea how to contact him..??

because im going to get myself an Edifier speaker, i went there just now but someone offered me a price which is higher than the normal, and i could not even make rm1 discount from him, im really dissapointed....

p/s: i heard from some forumers that Precess always gives good prices and discounts to customer
limhongwoon
post Jan 3 2009, 01:45 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
precess there got sell razer product ??
zs3889
post Jan 3 2009, 02:05 PM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
QUOTE(limhongwoon @ Jan 3 2009, 01:45 PM)
precess there got sell razer product ??
*
hey hongwoon, you are looking for razer product??

you can try NanYang at Sunshine Bayan Baru, i just went there and saw some razer mouses and pads..
TS@meno
post Jan 3 2009, 02:48 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(lohwenli @ Jan 2 2009, 01:28 PM)
Female one..

Speaking of retired..I'm kinda comin out of 'retirement'. But going slower now, getting old d  laugh.gif
*
Lol...
Is that the Monkey lookalike Baby Dinosaur in Purple?
Btw, welcome back bro, waiting to see more coming from you.

QUOTE(zs3889 @ Jan 3 2009, 12:26 AM)
Hi all penang guys here, wish you guys could give some help to me..

im looking for Jack, from Precess Bj, is he still around here?? or anyone has any idea how to contact him..??

because im going to get myself an Edifier speaker, i went there just now but someone offered me a price which is higher than the normal, and i could not even make rm1 discount from him, im really dissapointed....

p/s: i heard from some forumers that Precess always gives good prices and discounts to customer
*
Jack is still around here, but not sure if he's active. His nick is Silence.
Btw, you could always drop him a call before you go over to precess.
He should be there most of the time, which guy offered you the ridiculous price?
zs3889
post Jan 3 2009, 02:55 PM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
QUOTE(@meno @ Jan 3 2009, 02:48 PM)
Jack is still around here, but not sure if he's active. His nick is Silence.
Btw, you could always drop him a call before you go over to precess.
He should be there most of the time, which guy offered you the ridiculous price?
*
an old guy offered me that, and there was no way to make nego with him at all, dissapointed with that...what's his number btw??

This post has been edited by zs3889: Jan 3 2009, 02:57 PM
metsatsu
post Jan 3 2009, 07:14 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(zs3889 @ Jan 3 2009, 02:05 PM)
hey hongwoon, you are looking for razer product??

you can try NanYang at Sunshine Bayan Baru, i just went there and saw some razer mouses and pads..
*
the nanyang in prangin mall also have smile.gif
zs3889
post Jan 3 2009, 07:27 PM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
QUOTE(metsatsu @ Jan 3 2009, 07:14 PM)
the nanyang in prangin mall also have smile.gif
*
but he at jelutong, bayan baru will be nearer to him smile.gif
limhongwoon
post Jan 3 2009, 08:03 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(zs3889 @ Jan 3 2009, 08:27 PM)
but he at jelutong, bayan baru will be nearer to him  smile.gif
*
how do u know i live near jelutong ??? brows.gif sunshine bayan baru ( sunshine square u mean ) ??

Added on January 3, 2009, 9:11 pm
QUOTE(zs3889 @ Jan 3 2009, 08:27 PM)
but he at jelutong, bayan baru will be nearer to him  smile.gif
*
already remember u liao , u found the paint liao ??

This post has been edited by limhongwoon: Jan 3 2009, 09:11 PM
zs3889
post Jan 4 2009, 03:53 PM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
Yea Sunshine Square, here nearer or pragin mall? haha actually im not so clear...

btw, im still finding the paint, perhaps i will go other area to find, errr we discuss about this personally la, back to the overclock topic laugh.gif laugh.gif
pokok86
post Jan 5 2009, 02:15 AM

Getting Started
**
Junior Member
235 posts

Joined: Jan 2007
From: Kedah----Penang
hei, now how many penang kia used I7 d?
come on rich guy, just share out ur experience
cschun86
post Jan 7 2009, 10:05 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
huh.gif huh.gif Black box arrive at my house when I am not at home...huh.gif huh.gif

» Click to show Spoiler - click again to hide... «
lee82gx
post Jan 7 2009, 10:12 AM

I guess I'm special
*******
Senior Member
3,117 posts

Joined: Jul 2005
From: Penang
hi guys,
which shop in Bayan Lepas / baru got sell good thermal paste with good price?

Kinda asking for a lot in 1 question hehe.

Time to re-apply paste for personal record OC.
karom
post Jan 7 2009, 01:44 PM

Hello everybody
******
Senior Member
1,262 posts

Joined: Aug 2006
From: Butterworth, Penang
QUOTE(cschun86 @ Jan 7 2009, 10:05 AM)
huh.gif  huh.gif Black box arrive at my house when I am not at home...huh.gif  huh.gif

» Click to show Spoiler - click again to hide... «

*
Wow.. i7 965 arr?
TS@meno
post Jan 7 2009, 02:21 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(karom @ Jan 7 2009, 01:44 PM)
Wow.. i7 965 arr?
*
Looks like 1 to me...

chun, will it be too much to ask you to contribute that for our next OC meetup?
I guess it'll be fun...
Lets find a time when most people are free and coolice is in Pg and play with something...tongue.gif
cschun86
post Jan 7 2009, 03:52 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(@meno @ Jan 7 2009, 02:21 PM)
Looks like 1 to me...

chun, will it be too much to ask you to contribute that for our next OC meetup?
I guess it'll be fun...
Lets find a time when most people are free and coolice is in Pg and play with something...tongue.gif
*
Tat proc belong to me till this weekend or maybe next mon or tuesday only tongue.gif
ask coolice to share it tongue.gif
lohwenli
post Jan 7 2009, 11:03 PM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
QUOTE(@meno @ Jan 7 2009, 02:21 PM)
Looks like 1 to me...

chun, will it be too much to ask you to contribute that for our next OC meetup?
I guess it'll be fun...
Lets find a time when most people are free and coolice is in Pg and play with something...tongue.gif
*
I can bring along rocket launcher brows.gif Anyone contribute ammunition?


QUOTE(cschun86 @ Jan 7 2009, 03:52 PM)
Tat proc belong to me till this weekend or maybe next mon or tuesday only tongue.gif
ask coolice to share it tongue.gif
*
Ah..that's just too bad..
TS@meno
post Jan 8 2009, 03:45 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(cschun86 @ Jan 7 2009, 03:52 PM)
Tat proc belong to me till this weekend or maybe next mon or tuesday only tongue.gif
ask coolice to share it tongue.gif
*
Woots...
So thats the proc he was telling me about the other day... brows.gif

Well, maybe we can talk him into doing a demo on LN2 with that proc... laugh.gif
pokok86
post Jan 9 2009, 04:33 PM

Getting Started
**
Junior Member
235 posts

Joined: Jan 2007
From: Kedah----Penang
QUOTE(cschun86 @ Jan 7 2009, 03:52 PM)
Tat proc belong to me till this weekend or maybe next mon or tuesday only tongue.gif
ask coolice to share it tongue.gif
*
wah cschun earn money liao lol
jom minum kopi

no wan use i7 on ur own meh?
lohwenli
post Jan 10 2009, 02:10 PM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
AMD's BACK!!!!

http://www.guru3d.com/article/amd-phenom-i...0-review-test/1
http://www.tomshardware.co.uk/phenom-ii-94...view-31485.html


Dragon platform rocks! Penryn has serious competition now! bruce.gif

Of course i7 still beats it, but it costs the earth and sky mega_shok.gif mega_shok.gif
And after overclocking, Phenom II is uncomfortably close to non-overclocked i7 performance..and Phenom II is not as sensitive to high voltages as i7 (datasheet says 1.5vCore ALLOWED, rclxm9.gif rclxm9.gif ), and we can still use our AM2/AM2+ boards brows.gif
lohwenli
post Jan 11 2009, 03:31 PM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
In the case of Phenom II, its not that bad, since its still compatible with existing AM2/AM2+ boards. Price is still not too bad considering its performance, around C2Q 9xxx series price.
TS@meno
post Jan 13 2009, 11:43 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(lohwenli @ Jan 10 2009, 02:10 PM)
AMD's BACK!!!!

http://www.guru3d.com/article/amd-phenom-i...0-review-test/1
http://www.tomshardware.co.uk/phenom-ii-94...view-31485.html
Dragon platform rocks! Penryn has serious competition now! bruce.gif

Of course i7 still beats it, but it costs the earth and sky mega_shok.gif  mega_shok.gif
And after overclocking, Phenom II is uncomfortably close to non-overclocked i7 performance..and Phenom II is not as sensitive to high voltages as i7 (datasheet says 1.5vCore ALLOWED,  rclxm9.gif rclxm9.gif ), and we can still use our AM2/AM2+ boards  brows.gif
*
Well, Phenom II was never meant to go head to head with the i7.
Yup, the Phenom II should be able to take voltages better than the Intel procs, but the 1 thing is, how will the existing line of motherboards do at these kind of voltages?
As far as i know, if you're running a DFI, u might be safe, but if it's an MSI you're talking about, it's quite a risk to kill the board.
I think coolice killed one MSI board when he reviewed the Phenom II.

QUOTE(lohwenli @ Jan 11 2009, 03:31 PM)
In the case of Phenom II, its not that bad, since its still compatible with existing AM2/AM2+ boards. Price is still not too bad considering its performance, around C2Q 9xxx series price.
*
Price performance ratio, it's a very decent purchase.
salimbest83
post Jan 13 2009, 12:19 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
maybe not till next month..
ANAND SAID
intel planning to drop prices for Q9650 and 9550 to beat the PII 940 & 920

Added on January 13, 2009, 12:38 pmGUYS..

anyone here oredi have Windows 7?

i still cant download from microsoft web..maybe to crowded..

This post has been edited by salimbest83: Jan 13 2009, 12:38 PM
TS@meno
post Jan 13 2009, 01:33 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(salimbest83 @ Jan 13 2009, 12:19 PM)
maybe not till next month..
ANAND SAID
intel planning to drop prices for Q9650 and 9550 to beat the PII 940 & 920

Added on January 13, 2009, 12:38 pmGUYS..

anyone here oredi have Windows 7?

i still cant download from microsoft web..maybe to crowded..
*
I know coolice is testing windows 7 already.
But from where he got it, maybe you'll need to ask him.
salimbest83
post Jan 13 2009, 02:23 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(@meno @ Jan 13 2009, 01:33 PM)
I know coolice is testing windows 7 already.
But from where he got it, maybe you'll need to ask him.
*
coolice?

maybe he too busy wif testing new PC.. tongue.gif

btw anyone can burn that installation file..
i will pay for it notworthy.gif

really wanna test it out..
PowerSlide
post Jan 14 2009, 08:04 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
nearly finish downloading window 7..will try it out later thumbup.gif

anyone played gtx295? whistling.gif
mmohdnor
post Jan 15 2009, 01:03 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
any of u know where to buy wifi card for laptop in penang?
looking for mini pcie wifi card, not usb or the express card type.
salimbest83
post Jan 15 2009, 08:48 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(PowerSlide @ Jan 14 2009, 08:04 PM)
nearly finish downloading window 7..will try it out later  thumbup.gif

anyone played gtx295?  whistling.gif
*
oso finish downloading the 64bit one..
3.15GB ISO.. nod.gif
will try out tonight
overclockalbert
post Jan 16 2009, 01:43 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
@salimbest83,

can burn 1 copy for me ah? rclxms.gif

teh tarik on me ok.

rgds,
albert
salimbest83
post Jan 16 2009, 08:07 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(overclockalbert @ Jan 16 2009, 01:43 AM)
@salimbest83,

can burn 1 copy for me ah?  rclxms.gif

teh tarik on me ok.

rgds,
albert
*
okay..can. when u wanna take it..& where
just pay for DVD only la..
burn for free.
salimbest83
post Jan 16 2009, 08:10 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(cyberloner @ Jan 16 2009, 02:26 AM)
windows 7 still a lot bugs...
*
agreed.. but still worthy to try..
here my score..

my hdd still the slowest in there


Attached thumbnail(s)
Attached Image Attached Image
PowerSlide
post Jan 16 2009, 09:46 AM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
yesterday played with window 7 for hours and its preety good for a beta but surely still alot bugs since its still beta

alot of eye candy but that not what i matter but this is what vista should be when its launch..no high requirement & snappy to use like xp

salim,

yours is 64bit? mine only 32bit..later i try what score i will get but my ancient proc should be the slowest tongue.gif
salimbest83
post Jan 16 2009, 11:43 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(PowerSlide @ Jan 16 2009, 09:46 AM)
yesterday played with window 7 for hours and its preety good for a beta but surely still alot bugs since its still beta

alot of eye candy but that not what i matter but this is what vista should be when its launch..no high requirement & snappy to use like xp

salim,

yours is 64bit? mine only 32bit..later i try what score i will get but my ancient proc should be the slowest  tongue.gif
*
yap..mine 64bit.

how ancient it is?
AMD64 user ahh.

im still cant find a buyer for my 3500+ even when give Rm60 for it..
PowerSlide
post Jan 16 2009, 02:46 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
yep amd64 3600 saja blush.gif

if your proc cant sell make it as keychain brows.gif
overclockalbert
post Jan 16 2009, 04:30 PM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
QUOTE(salimbest83 @ Jan 16 2009, 09:07 AM)
okay..can. when u wanna take it..& where
just pay for DVD only la..
burn for free.
*
cool! rclxms.gif thanks

where is your location bro?

rgds
salimbest83
post Jan 17 2009, 10:13 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(overclockalbert @ Jan 16 2009, 04:30 PM)
cool!  rclxms.gif thanks

where is your location bro?

rgds
*
sori late reply. Im working near penag pos ofis. 1min frm fery
zuhair
post Jan 17 2009, 10:56 AM

New Member
*
Junior Member
43 posts

Joined: Dec 2006
From: puchong
just to let all of you know, memoryc have 4 units of stock for team's ddr800 cl3. as off now. SATURDAY - 10.57 AM - 50euro
salimbest83
post Jan 17 2009, 01:22 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
How many gb? 50 euro? Sell from where?
zuhair
post Jan 17 2009, 01:40 PM

New Member
*
Junior Member
43 posts

Joined: Dec 2006
From: puchong
2gb kit, 50 euro the price + 10 euro postage. buy it here www.memoryc.com
bought few kits from them. usually around 10 days for item to arrive here in malaysia. payment thru credit cards or paypal.

This post has been edited by zuhair: Jan 17 2009, 01:44 PM
salimbest83
post Jan 17 2009, 07:59 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
I think 2gb kit not enuf for newer pc..esp vista.. Time to go for 8gb now. smile.gif
cschun86
post Jan 18 2009, 12:53 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(salimbest83 @ Jan 17 2009, 07:59 PM)
I think 2gb kit not enuf for newer pc..esp vista.. Time to go for 8gb now. smile.gif
*
and soon DDR3~
so, stick with ur current DDR2 kit biggrin.gif
salimbest83
post Jan 19 2009, 08:47 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(cschun86 @ Jan 18 2009, 12:53 AM)
and soon DDR3~
so, stick with ur current DDR2 kit biggrin.gif
*
erm..
dont think i can change new rig soo enuff..
maybe after i7 on 32nm
zs3889
post Jan 22 2009, 11:53 PM

Regular
******
Senior Member
1,592 posts

Joined: Feb 2008
From: Penang
any pro can help me with my prob here ??

http://forum.lowyat.net/topic/914757
metsatsu
post Jan 25 2009, 12:11 AM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(salimbest83 @ Jan 19 2009, 08:47 AM)
erm..
dont think i can change new rig soo enuff..
maybe after i7 on 32nm
*
i'm in the same boat as you bro smile.gif
shawnlut
post Jan 25 2009, 05:22 PM

±±±±±±
*****
Senior Member
837 posts

Joined: Oct 2007
From: Penang
Good Day...
Happy Chinese New Year !!! rclxm9.gif rclxm9.gif cheers.gif
TS@meno
post Jan 26 2009, 01:43 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(zuhair @ Jan 17 2009, 10:56 AM)
just to let all of you know, memoryc have 4 units of stock for team's ddr800 cl3. as off now. SATURDAY - 10.57 AM - 50euro
*
QUOTE(zuhair @ Jan 17 2009, 01:40 PM)
2gb kit, 50 euro the price + 10 euro postage. buy it here www.memoryc.com
bought few kits from them. usually around 10 days for item to arrive here in malaysia. payment thru credit cards or paypal.
*
Sweet, too bad i just saw it now, else i'm going in for another pair to make mine 4gb.
I tot i'd never see these sticks on sale anymore.

I just checked, stocks still available.
Anyone can help me make a purchase, me no CC or Paypal here...

QUOTE(salimbest83 @ Jan 17 2009, 07:59 PM)
I think 2gb kit not enuf for newer pc..esp vista.. Time to go for 8gb now. smile.gif
*
That very much depends on usage. biggrin.gif
Btw, you could always get 4x1gb for 4gb, that should be decent enough.

This post has been edited by @meno: Jan 26 2009, 01:52 AM
lohwenli
post Jan 26 2009, 09:09 AM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
QUOTE(@meno @ Jan 26 2009, 01:43 AM)
I just checked, stocks still available.
Anyone can help me make a purchase, me no CC or Paypal here...
That very much depends on usage.  biggrin.gif
Btw, you could always get 4x1gb for 4gb, that should be decent enough.
*
There are a number of traders here selling paypal funds, kucing had 1K+ USD available not long ago but all gone now. You don't need a credit card for a paypal account, you only need it to verify your account (meaning you'll be limited to 100USD max per transaction).
gsan
post Jan 28 2009, 11:22 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
anyone going to queenbay starbuck tonight?
salimbest83
post Jan 28 2009, 01:02 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(metsatsu @ Jan 25 2009, 12:11 AM)
i'm in the same boat as you bro smile.gif
*
come onboard bro.. tongue.gif

Added on January 28, 2009, 1:03 pm
QUOTE(gsan @ Jan 28 2009, 11:22 AM)
anyone going to queenbay starbuck tonight?
*
any special event or just makan angin ?

This post has been edited by salimbest83: Jan 28 2009, 01:03 PM
TS@meno
post Jan 29 2009, 12:03 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(salimbest83 @ Jan 28 2009, 01:02 PM)
any special event or just makan angin ?
*
Some of us will be meeting up for a Yam Cha session.

So far, we have a couple of people who have confirmed to be there.
So do drop by if you're interested.
We'll be there at 10pm.
shaun3230
post Jan 29 2009, 05:27 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
ai yo, 2GB enough ady la...

I can still play Crysis and winamp one without lagging
limhongwoon
post Jan 29 2009, 05:31 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(shaun3230 @ Jan 29 2009, 06:27 PM)
ai yo, 2GB enough ady la...

I can still play Crysis and winamp one without lagging
*
bro , wad is winamp ??? media player??
gsan
post Jan 29 2009, 06:17 PM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(@meno @ Jan 29 2009, 12:03 PM)
Some of us will be meeting up for a Yam Cha session.

So far, we have a couple of people who have confirmed to be there.
So do drop by if you're interested.
We'll be there at 10pm.
*
yaya

anyone else interested?
shaun3230
post Jan 29 2009, 06:35 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
Yes, to play songs....
limhongwoon
post Jan 29 2009, 06:41 PM

Intel Certified - COre I7
*******
Senior Member
2,892 posts

Joined: Oct 2007
From: Penang
QUOTE(shaun3230 @ Jan 29 2009, 07:35 PM)
Yes, to play songs....
*
can lag 1 meh ??
gsan
post Jan 30 2009, 03:04 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
Just back from POC TT section.

got @meno, coolice, lohwenli, michealelsie and I.
salimbest83
post Jan 30 2009, 09:31 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(shaun3230 @ Jan 29 2009, 05:27 PM)
ai yo, 2GB enough ady la...

I can still play Crysis and winamp one without lagging
*
yeap.. bare ly enuff..
OC4/3
post Jan 30 2009, 10:01 AM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(gsan @ Jan 30 2009, 03:04 AM)
Just back from POC TT section.

got @meno, coolice, lohwenli, michealelsie and I.
*
Pictar whistling.gif
» Click to show Spoiler - click again to hide... «
TS@meno
post Jan 30 2009, 10:24 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(gsan @ Jan 30 2009, 03:04 AM)
Just back from POC TT section.

got @meno, coolice, lohwenli, michealelsie and I.
*
Haha, ya...Nice seeing you guys around again...
I hope next time we'll have a bigger crowd.

Btw, lohwenli did suggest about either a LanParty or OC Session in the coming months.
Please provide feedbacks on these events and see which of this are more favourable to you.
Location had been firmed up, so we'll just gauge the response and find a time to proceed...

Bro OC4/3, you still owe me a quotation... brows.gif
The pics i'll upload after editing...The group shot was underexposed...Noob Photographer here...
OC4/3
post Jan 31 2009, 03:47 AM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(@meno @ Jan 30 2009, 10:24 AM)
Haha, ya...Nice seeing you guys around again...
I hope next time we'll have a bigger crowd.

Btw, lohwenli did suggest about either a LanParty or OC Session in the coming months.
Please provide feedbacks on these events and see which of this are more favourable to you.
Location had been firmed up, so we'll just gauge the response and find a time to proceed...

Bro OC4/3, you still owe me a quotation... brows.gif
The pics i'll upload after editing...The group shot was underexposed...Noob Photographer here...
*
Quotation for? laugh.gif
Camera ar whistling.gif

mmohdnor
post Jan 31 2009, 09:23 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
which shop sells good price for gigabyte odin psu's in penang?
and for a 450-550W psu, which one is 'best bang for buck' eh?

budget is RM380 max only ...
i was looking at CM M520 520W (modular) @ RM375 and corsair VX550W @RM380
any other suggestion?

This post has been edited by mmohdnor: Jan 31 2009, 09:30 AM
TS@meno
post Jan 31 2009, 06:49 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(OC4/3 @ Jan 31 2009, 03:47 AM)
Quotation for? laugh.gif
Camera ar whistling.gif
*
Mobo...Camera also if got.

QUOTE(mmohdnor @ Jan 31 2009, 09:23 AM)
which shop sells good price for gigabyte odin psu's in penang?
and for a 450-550W psu, which one is 'best bang for buck' eh?

budget is RM380 max only ...
i was looking at CM M520 520W (modular) @ RM375 and corsair VX550W @RM380
any other suggestion?
*
If u can wait till the next pc fair, get an Enermax 535 FMA Iron from Gadget Zone.
You'll be surprised with the price offered.
mmohdnor
post Jan 31 2009, 06:56 PM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
errr how much is that enermax currently ...i mean, penang price ..
OC4/3
post Jan 31 2009, 11:28 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(@meno @ Jan 31 2009, 06:49 PM)
Mobo...Camera also if got.

*
Mobo ar that one got to wait,fastest also tomorrow lor
Errrr what mobo you want again ar? biggrin.gif
TS@meno
post Feb 1 2009, 04:54 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(mmohdnor @ Jan 31 2009, 06:56 PM)
errr how much is that enermax currently ...i mean, penang price ..
*
Normal price, around RM330-340.
Pc Fair price, so far for the past 3 fairs, it's selling for RM269.

QUOTE(OC4/3 @ Jan 31 2009, 11:28 PM)
Mobo ar that one got to wait,fastest also tomorrow lor
Errrr what mobo you want again ar? biggrin.gif
*
DFI P45 UT DDR2 version...
The Nikon D80 any chance of finding?
youloong118
post Feb 1 2009, 10:14 PM

Getting Started
**
Junior Member
109 posts

Joined: Oct 2008
yo sifus ! i am from penang too and i am planning to get a new rig,those are the price i got from swisspac

Processor : C2D E8400 [rm 632]

Mobo : Asus P5Q3-Incl. 2gb DDR3 Ram [rm667]

Graphics : Palit HD4850 Sonic [rm704]

HDD : WD 500gb 16M Caviar Green [rm192]

Casing : CM Centurion 590 [rm236]

PSU : CM Extreme Power 650W [rm280]

Cooling : Xigmatek HDT-S1283 [rm175]

anyone can recommend better shops ? i saw the online price list of pc depot have very little parts only sad.gif
OC4/3
post Feb 1 2009, 11:03 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(@meno @ Feb 1 2009, 04:54 PM)
Normal price, around RM330-340.
Pc Fair price, so far for the past 3 fairs, it's selling for RM269.
DFI P45 UT DDR2 version...
The Nikon D80 any chance of finding?
*
Mobo let you know Wednesday soonest
Shufflerz
post Feb 2 2009, 01:13 AM

Getting Started
*****
Senior Member
913 posts

Joined: Jan 2007
From: Butterworth, Penang
QUOTE(youloong118 @ Feb 1 2009, 10:14 PM)
Processor : C2D E8400 [rm 632]
*
Overprice!
Can get around RM605.
Try Precess @ BJ.
Or if you're from Butterworth, drop me a PM I tell you where to go.
Surely not PC Depot. tongue.gif
youloong118
post Feb 2 2009, 09:15 AM

Getting Started
**
Junior Member
109 posts

Joined: Oct 2008
QUOTE(Shufflerz @ Feb 2 2009, 01:13 AM)
Overprice!
Can get around RM605.
Try Precess @ BJ.
Or if you're from Butterworth, drop me a PM I tell you where to go.
Surely not PC Depot. tongue.gif
*
pc depot selling at rm600. can mix and match from different stores and ask the shop guy to assemble ? icon_idea.gif
AceCombat
post Feb 2 2009, 09:49 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Ace meimei assemble for free and oc to 4GHz in 3 minutes drool.gif
laugh.gif laugh.gif laugh.gif laugh.gif laugh.gif
lichyetan
post Feb 2 2009, 02:02 PM

*****
*******
Senior Member
2,295 posts

Joined: Jan 2005
From: Penang
QUOTE(youloong118 @ Feb 1 2009, 10:14 PM)
yo sifus ! i am from penang too and i am planning to get a new rig,those are the price i got from swisspac

Processor : C2D E8400 [rm 632]

Mobo : Asus P5Q3-Incl. 2gb DDR3 Ram [rm667]

Graphics : Palit HD4850 Sonic [rm704]

HDD : WD 500gb 16M Caviar Green [rm192]

Casing : CM Centurion 590 [rm236]

PSU : CM Extreme Power 650W [rm280]

Cooling : Xigmatek HDT-S1283 [rm175]

anyone can recommend better shops ? i saw the online price list of pc depot have very little parts only  sad.gif
*
from my past experience, swisspac after sales service is good... and warranty i think they do cover more than 1 years compare to most shop which is 1 year...
last time claim my almost 3 year old hdd also no service charge unlike some shops which charges service charge after 1 year of product warranty claim.
PC depot heard lot of negatives...
youloong118
post Feb 2 2009, 02:11 PM

Getting Started
**
Junior Member
109 posts

Joined: Oct 2008
yeah but i can only get the mobo and GC from there,so do you think they will assemble if i bought other parts from pc depot ? or maybe i should try it myself.lol
thteong82
post Feb 2 2009, 02:13 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
Is it advisable to change default northbridge heatsink?

I am using Asus M3A78-T, with IGP enabled.

Between, in penang where can I get AMD Phenom 2 processor?
TS@meno
post Feb 2 2009, 07:55 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(youloong118 @ Feb 1 2009, 10:14 PM)
yo sifus ! i am from penang too and i am planning to get a new rig,those are the price i got from swisspac

Processor : C2D E8400 [rm 632]

Mobo : Asus P5Q3-Incl. 2gb DDR3 Ram [rm667]

Graphics : Palit HD4850 Sonic [rm704]

HDD : WD 500gb 16M Caviar Green [rm192]

Casing : CM Centurion 590 [rm236]

PSU : CM Extreme Power 650W [rm280]

Cooling : Xigmatek HDT-S1283 [rm175]

anyone can recommend better shops ? i saw the online price list of pc depot have very little parts only  sad.gif
*
Bro, from the prices i see above, everything seems to be overpriced.
The GC is seriously overpriced IMHO. You could get a 2nd hand 4870 for that price.
And the Caviar Greens are actually 5,400rpm drives as mentioned by Lohwenli in our previous TT. If you're planning on using that as a boot drive, i'd say avoid it. Go for a Caviar Blue or Black instead. Or the WD6400AAKS is not bad too.
For the price of the extreme power, i think you'd better drop that and get an Enermax FMA II 535w instead. It might be 100w less than the xtreme, but there's a difference in quality between the 2. The CMs are good for their real powers, but the extremes are only good for the 460w model.

Below are the prices and spec you should expect:
E8400: RM600
P5Q-Pro: RM490
4gb of DDR2 800: RM150
WD640AAKS: RM225
Gainward 4850GS: RM640
Casing, PSU you might want to get them from GZ maybe. Get a CM690 and also an Enermax FMA II 535w
For cooling: The Xigmatek is just fine.


QUOTE(thteong82 @ Feb 2 2009, 02:13 PM)
Is it advisable to change default northbridge heatsink?

I am using Asus M3A78-T, with IGP enabled.

Between, in penang where can I get AMD Phenom 2 processor?
*
You can if you want to.
If the northbridge is running hot, then changing it will help get better temps which theoretically will prolong the lifespan of the mobo.
How hot is it running currently?

Regarding Phenom II, go to precess and ask Jack if he could help out.
Or you could always contact other forumers and see if they could help you get it in KL.
There are a couple of Penangites who are based in KL currently.
youloong118
post Feb 2 2009, 11:16 PM

Getting Started
**
Junior Member
109 posts

Joined: Oct 2008
QUOTE(@meno @ Feb 2 2009, 07:55 PM)
Bro, from the prices i see above, everything seems to be overpriced.
The GC is seriously overpriced IMHO. You could get a 2nd hand 4870 for that price.
And the Caviar Greens are actually 5,400rpm drives as mentioned by Lohwenli in our previous TT. If you're planning on using that as a boot drive, i'd say avoid it. Go for a Caviar Blue or Black instead. Or the WD6400AAKS is not bad too.
For the price of the extreme power, i think you'd better drop that and get an Enermax FMA II 535w instead. It might be 100w less than the xtreme, but there's a difference in quality between the 2. The CMs are good for their real powers, but the extremes are only good for the 460w model.

Below are the prices and spec you should expect:
E8400:                    RM600
P5Q-Pro:                  RM490
4gb of DDR2 800:    RM150
WD640AAKS:          RM225
Gainward 4850GS:  RM640
Casing, PSU you might want to get them from GZ maybe. Get a CM690 and also an Enermax FMA II 535w
For cooling: The Xigmatek is just fine.
*
ok bro.Thanks for the heads up on the HDD. notworthy.gif might get CM Real Power 550w / Corsair.is it enough if i want to run Crossfire ? I've trawled though reviews and the Asus/Powercolor/Gainward HD4850 have cooling issues with the reference coolers.
thteong82
post Feb 4 2009, 10:49 AM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
QUOTE(@meno @ Feb 2 2009, 08:55 PM)

Regarding Phenom II, go to precess and ask Jack if he could help out.
Or you could always contact other forumers and see if they could help you get it in KL.
There are a couple of Penangites who are based in KL currently.
*
So that means, still kinda hard to find in penang,right?

Then I better upgrade GC first before moving into P2
TS@meno
post Feb 4 2009, 11:59 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(youloong118 @ Feb 2 2009, 11:16 PM)
ok bro.Thanks for the heads up on the HDD. notworthy.gif might get CM Real Power 550w / Corsair.is it enough if i want to run Crossfire ? I've trawled though reviews and the Asus/Powercolor/Gainward HD4850 have cooling issues with the reference coolers.
*
The Gainward 4850 Golden Sample is the Palit Sonic iirc.
Palit makes the cards for Gainward.
So basically, they both run on the same cooler, only different outlook.
In terms of cooling, both should be somewhere in the same range.

QUOTE(thteong82 @ Feb 4 2009, 10:49 AM)
So that means, still kinda hard to find in penang,right?

Then I better upgrade GC first before moving into P2
*
Bro, not sure if anyone carries it.
PC Depot's price list still doesn't list it.
The only way to find out is by ringing the shops up and enquire.
thteong82
post Feb 4 2009, 05:03 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
What do you think with my Power Supply voltage?

Is it normal for 12V only have 4.8V, while -5V got -10.88V


[attachmentid=788988]

This post has been edited by thteong82: Feb 4 2009, 05:04 PM
ktek
post Feb 4 2009, 07:02 PM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
program read wrong /sensor wrong.
AceCombat
post Feb 5 2009, 05:33 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
yup,why dont u use BIOS to have the reading?
anyway,ur AAKS quite hot.
thteong82
post Feb 5 2009, 09:14 AM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
QUOTE(AceCombat @ Feb 5 2009, 06:33 AM)
yup,why dont u use BIOS to have the reading?
anyway,ur AAKS quite hot.
*
How to make it cooler? sweat.gif

Just checked : In BIOS, the reading is ok.
TS@meno
post Feb 5 2009, 11:16 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(AceCombat @ Feb 5 2009, 05:33 AM)
yup,why dont u use BIOS to have the reading?
anyway,ur AAKS quite hot.
*
If it was cooled passively, that temp is pretty normal for an AAKS.

Btw, the only accurate way to get PSU readings is using a multimeter.
Any bios reading or software reading is always out to a certain extent.
However, the more reliable softwares which could monitor this is the Lavasys Everest Ultimate.
thteong82
post Feb 5 2009, 12:24 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
Need some opinion from you guys/girls.

Using CM690 currently, I would like to put some fans to make inside casing more cooler.

My idea.

Air Intake - Front and both side.
Air Outlet - Back and top.

Is it ok?

Between, how to cool the hardisk "actively"?
ktek
post Feb 5 2009, 01:46 PM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
moar fan != colder. choose & use fan wisely.
between? btw, ur AAKS quite hot.
use chopsticks mod. ask Ace meimei tongue.gif

This post has been edited by ktek: Feb 5 2009, 01:47 PM
AceCombat
post Feb 5 2009, 05:51 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(thteong82 @ Feb 5 2009, 09:14 AM)
How to make it cooler?  sweat.gif

Just checked : In BIOS, the reading is ok.
*
dont stack ur hdd,leave some space in between it.Mine one hdd then blank 2 hdd space then only another hdd.
both of my AAKS only 35c like that if actively cool around 32c nia biggrin.gif

QUOTE(@meno @ Feb 5 2009, 11:16 AM)
If it was cooled passively, that temp is pretty normal for an AAKS.

Btw, the only accurate way to get PSU readings is using a multimeter.
Any bios reading or software reading is always out to a certain extent.
However, the more reliable softwares which could monitor this is the Lavasys Everest Ultimate.
*
yup,DMM and cucuk to molex is better way to get reading.

QUOTE(thteong82 @ Feb 5 2009, 12:24 PM)
Need some opinion from you guys/girls.

Using CM690 currently, I would like to put some fans to make inside casing more cooler.

My idea.

Air Intake - Front and both side.
Air Outlet - Back and top.

Is it ok?

Between, how to cool the hardisk "actively"?
*
yup,it's ok but i suggest u using strong instake at front cause the HDD area blocked quite a lot of air flow.

QUOTE(ktek @ Feb 5 2009, 01:46 PM)
moar fan != colder. choose & use fan wisely.
between? btw, ur AAKS quite hot.
use chopsticks mod. ask Ace meimei tongue.gif
*
laugh.gif
i use screw one la,where got chopstick? rclxs0.gif
thteong82
post Feb 5 2009, 06:12 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
QUOTE(AceCombat @ Feb 5 2009, 06:51 PM)
dont stack ur hdd,leave some space in between it.Mine one hdd then blank 2 hdd space then only another hdd.
both of my AAKS only 35c like that if actively cool around 32c nia biggrin.gif
yup,DMM and cucuk to molex is better way to get reading.
yup,it's ok but i suggest u using strong instake at front cause the HDD area blocked quite a lot of air flow.
laugh.gif
i use screw one la,where got chopstick? rclxs0.gif
*
Chopsticks mod? What is that?

Strong intake means, loud sound - right? rclxub.gif

In Penang area, which shop/person provide some modding service?

My requirement,

Change chipset heatsink to better heatsink with fan.

TS@meno
post Feb 5 2009, 09:41 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(thteong82 @ Feb 5 2009, 06:12 PM)
Chopsticks mod? What is that?

Strong intake means, loud sound - right?  rclxub.gif

In Penang area, which shop/person provide some modding service?

My requirement,

Change chipset heatsink to better heatsink with fan.
*
You should try doing that yourself.
Get a chipset heatsink like the thermalright HR-05/HR-05 SLI.
The attach a small 70mm fan to it.

Btw, a decent fan doesn't 100% be loud. Go for something which is tolerable for you.
Another thing, use the cm690 front intake to cool down the hdd.
Use the side as an intake. The rear and top as exhaust will be good.
But make sure theres ample space beside for air to circulate.
thteong82
post Feb 5 2009, 10:46 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
QUOTE(@meno @ Feb 5 2009, 10:41 PM)
You should try doing that yourself.
Get a chipset heatsink like the thermalright HR-05/HR-05 SLI.
The attach a small 70mm fan to it.

Btw, a decent fan doesn't 100% be loud. Go for something which is tolerable for you.
Another thing, use the cm690 front intake to cool down the hdd.
Use the side as an intake. The rear and top as exhaust will be good.
But make sure theres ample space beside for air to circulate.
*
Thanks for everyone here is Penang Overclockers club. rclxms.gif
Almost all my question being answered professionally. notworthy.gif

Meno, I do think it's hard to disassemble the chipset heatsink. Afraid I would spoil the chipset, that's why I would like to leave it to more "pro" people.
TS@meno
post Feb 5 2009, 11:36 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(thteong82 @ Feb 5 2009, 10:46 PM)
Thanks for everyone here is Penang Overclockers club.  rclxms.gif
Almost all my question being answered professionally.  notworthy.gif

Meno, I do think it's hard to disassemble the chipset heatsink. Afraid I would spoil the chipset, that's why I would like to leave it to more "pro" people.
*
Bro, Wat mobo are you using?
shawnlut
post Feb 6 2009, 12:33 AM

±±±±±±
*****
Senior Member
837 posts

Joined: Oct 2007
From: Penang
Come come come......
We'll do it for you... brows.gif brows.gif
AceCombat
post Feb 6 2009, 06:31 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(thteong82 @ Feb 5 2009, 10:46 PM)
Thanks for everyone here is Penang Overclockers club.  rclxms.gif
Almost all my question being answered professionally.  notworthy.gif

Meno, I do think it's hard to disassemble the chipset heatsink. Afraid I would spoil the chipset, that's why I would like to leave it to more "pro" people.
*
ya,what mobo u using actually?
anyway,u can drop me a sms and if i free i can change it FOC-ly for u,just a simple job smile.gif
AceCombat
post Feb 6 2009, 06:33 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Guys,forumer shawnlut is very very very good friend of mine wub.gif buying high end stuff and always come visit Ace meimei when he free tongue.gif (hope that ur wife no see this msg brather or else i think ur ear will kena twist tongue.gif tongue.gif tongue.gif laugh.gif )
just kidding anyway.

4870x2 got kangtau already,can drop me sms anytime smile.gif
thteong82
post Feb 6 2009, 09:42 AM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
QUOTE(@meno @ Feb 6 2009, 12:36 AM)
Bro, Wat mobo are you using?
*
Asus M3A78-T. AMD 790GX mobo. sweat.gif

QUOTE(shawnlut @ Feb 6 2009, 01:33 AM)
Come come come......
We'll do it for you... brows.gif  brows.gif
*
Where and when? thumbup.gif

QUOTE(AceCombat @ Feb 6 2009, 07:31 AM)
ya,what mobo u using actually?
anyway,u can drop me a sms and if i free i can change it FOC-ly for u,just a simple job smile.gif
*
How to sms without knowing your phone number? sweat.gif
What 4870x2 kang tao? How much? rclxm9.gif
cschun86
post Feb 6 2009, 10:21 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(AceCombat @ Feb 6 2009, 06:33 AM)
Guys,forumer shawnlut is very very very good friend of mine wub.gif buying high end stuff and always come visit Ace meimei when he free tongue.gif (hope that ur wife no see this msg brather or else i think ur ear will kena twist laugh.gif )
just kidding anyway.

4870x2 got kangtau already,can drop me sms anytime smile.gif
*
boss, ur kang tao how much?

QUOTE(thteong82 @ Feb 6 2009, 09:42 AM)
Asus M3A78-T. AMD 790GX mobo.  sweat.gif
Where and when?  thumbup.gif
How to sms without knowing your phone number?  sweat.gif
What 4870x2 kang tao? How much?  rclxm9.gif
*
ohya, not "meno", his name is "Ameno" tongue.gif
TS@meno
post Feb 6 2009, 11:22 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(thteong82 @ Feb 6 2009, 09:42 AM)
Asus M3A78-T. AMD 790GX mobo.  sweat.gif
Where and when?  thumbup.gif
How to sms without knowing your phone number?  sweat.gif
What 4870x2 kang tao? How much?  rclxm9.gif
*
Th M3A78-T should be pretty easy to replace.
Well, you could always ask Ace to guide you and you try it out yourself.
The Hands On experience is always different. Just be careful and dun do anything stupid, then everything should be fine. thumbup.gif

Acey, X2 how much?
RM1 i want 100 units... whistling.gif

QUOTE(cschun86 @ Feb 6 2009, 10:21 AM)
boss, ur kang tao how much?
ohya, not "meno", his name is "Ameno" tongue.gif
*
Lol...Haha, a lot of ppl keep calling me Meno, making me sound like Nemo the fish...tongue.gif

Btw, i need ur help if possible.
Discuss in PM... brows.gif
shiloong7081
post Feb 6 2009, 11:49 PM

Enthusiast
*****
Senior Member
928 posts

Joined: Jul 2006
Ace meimei/jiejie i think jie jie coz i am stil pretty young =P,you buka kedai kat mana ?
owikh84
post Feb 6 2009, 11:53 PM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(AceCombat @ Feb 6 2009, 06:33 AM)
Guys,forumer shawnlut is very very very good friend of mine wub.gif buying high end stuff and always come visit Ace meimei when he free tongue.gif (hope that ur wife no see this msg brather or else i think ur ear will kena twist tongue.gif tongue.gif tongue.gif laugh.gif )
just kidding anyway.

4870x2 got kangtau already,can drop me sms anytime smile.gif
*
SMS me best price for 4870x2 nod.gif
AceCombat
post Feb 7 2009, 12:28 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(thteong82 @ Feb 6 2009, 09:42 AM)
Asus M3A78-T. AMD 790GX mobo.  sweat.gif
Where and when?  thumbup.gif
How to sms without knowing your phone number?  sweat.gif
What 4870x2 kang tao? How much?  rclxm9.gif
*
here you go,u can click on my profile anytime to retrieve information over there.
016-4098398 Ace / KC


QUOTE(@meno @ Feb 6 2009, 11:22 AM)
Th M3A78-T should be pretty easy to replace.
Well, you could always ask Ace to guide you and you try it out yourself.
The Hands On experience is always different. Just be careful and dun do anything stupid, then everything should be fine.  thumbup.gif

Acey, X2 how much?
RM1 i want 100 units... whistling.gif

*
I can guide him anyitme la,should be an easy job for me smile.gif
anyway,X2 prince will be confirmed on tis friday.

QUOTE(shiloong7081 @ Feb 6 2009, 11:49 PM)
Ace meimei/jiejie i think jie jie coz i am stil pretty young =P,you buka kedai kat mana ?
*
I buka kedai kat i punya rumah,small overclock heaven there.

QUOTE(owikh84 @ Feb 6 2009, 11:53 PM)
SMS me best price for 4870x2  nod.gif
*
sure thing,will be updated smile.gif
Shufflerz
post Feb 7 2009, 09:03 AM

Getting Started
*****
Senior Member
913 posts

Joined: Jan 2007
From: Butterworth, Penang
I need spoonfeed on overclocking thingy T.T
My graphic card got problem already... I think.
Who willing to help?
Msn msn ...

This post has been edited by Shufflerz: Feb 7 2009, 09:04 AM
FK003
post Feb 8 2009, 02:24 PM

New Member
*
Junior Member
25 posts

Joined: Sep 2008
From: hillside
Hello SIR SIFU, im noob and newbie here.SIR SIFU CAN U TEACH ME HOW TO OVERCLOCK MY AMD 6000+ (WINDSOR)?
PLEASE cry.gif
shawnlut
post Feb 8 2009, 04:22 PM

±±±±±±
*****
Senior Member
837 posts

Joined: Oct 2007
From: Penang
QUOTE(AceCombat @ Feb 6 2009, 06:33 AM)
Guys,forumer shawnlut is very very very good friend of mine wub.gif buying high end stuff and always come visit Ace meimei when he free tongue.gif (hope that ur wife no see this msg brather or else i think ur ear will kena twist tongue.gif tongue.gif tongue.gif laugh.gif )
just kidding anyway.

4870x2 got kangtau already,can drop me sms anytime smile.gif
*
When u free ??? I'm going to visit u again coz my wife not in the town... brows.gif brows.gif

FK003
post Feb 8 2009, 04:31 PM

New Member
*
Junior Member
25 posts

Joined: Sep 2008
From: hillside
Whoa,got girl also know how to OVERCLOCK ar? Im very SHAME lar, coz i dont know how to overclock. cry.gif
subrok007
post Feb 8 2009, 05:22 PM

Squirtle
******
Senior Member
1,632 posts

Joined: Oct 2007
From: Sea
QUOTE(shawnlut @ Feb 8 2009, 04:22 PM)
When u free ??? I'm going to visit u again coz my wife not in the town... brows.gif  brows.gif
*
where the shop of ace mei mei?? might to tel me...
AceCombat
post Feb 9 2009, 12:48 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(shawnlut @ Feb 8 2009, 04:22 PM)
When u free ??? I'm going to visit u again coz my wife not in the town... brows.gif  brows.gif
*
icon_idea.gif icon_idea.gif
Bro,my final exam finish this coming thursday,after this i will have 2 months holiday.

QUOTE(FK003 @ Feb 8 2009, 04:31 PM)
Whoa,got girl also know how to OVERCLOCK ar? Im very SHAME lar, coz i dont know how to overclock. cry.gif
*
Nvm,slowly learn,take ur time mah,but if wanna oc,u need to spend some money first smile.gif

QUOTE(subrok007 @ Feb 8 2009, 05:22 PM)
where the shop of ace mei mei?? might to tel me...
*
Ace meimei no have shop,just my house nia,.
overclockalbert
post Feb 9 2009, 01:41 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
4870X2 kangtau still got?
ktek
post Feb 9 2009, 11:05 AM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
when ace meimei become housewife
everyday overc00k ballz Quadro Eggs™ brows.gif
subrok007
post Feb 9 2009, 01:20 PM

Squirtle
******
Senior Member
1,632 posts

Joined: Oct 2007
From: Sea
QUOTE(AceCombat @ Feb 9 2009, 12:48 AM)
icon_idea.gif  icon_idea.gif
Bro,my final exam finish this coming thursday,after this i will have 2 months holiday.
Nvm,slowly learn,take ur time mah,but if wanna oc,u need to spend some money first smile.gif
Ace meimei no have shop,just my house nia,.
*
ace, u still student? which college or University?
AceCombat
post Feb 10 2009, 01:43 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
i'm not college or university gin na.
i'm inside Skill Development. smile.gif
iBenQ
post Feb 10 2009, 02:16 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(AceCombat @ Feb 10 2009, 01:43 AM)
i'm not college or university gin na.
i'm inside Skill Development. smile.gif
*
Penang Skill Development Centre?? working there or studying? biggrin.gif
cyberloner
post Feb 10 2009, 02:18 AM

Regular
******
Senior Member
1,560 posts

Joined: May 2005
From: Penang
QUOTE(FK003 @ Feb 8 2009, 02:24 PM)
Hello SIR SIFU, im noob and newbie here.SIR SIFU CAN U TEACH ME HOW TO OVERCLOCK MY AMD 6000+ (WINDSOR)?
PLEASE cry.gif
*
Good way is read read read than ask ppl how how how....
Google "overclock Amd windsor"
but personally i suggest don't oc it... 3ghz for windsor is eating a lot power already...
more overclock for it will eat more power that increase the electric bill only.
ktek
post Feb 10 2009, 09:41 AM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
QUOTE(AceCombat @ Feb 10 2009, 01:43 AM)
i'm not college or university gin na.
i'm inside Skill Development. smile.gif
*

oh my innocent 12years old baby wub.gif

QUOTE(iBenQ @ Feb 10 2009, 02:16 AM)
Penang Skill Development Centre?? working there or studying? biggrin.gif
*

slowpoke is slow

QUOTE(cyberloner @ Feb 10 2009, 02:18 AM)
Good way is read read read than ask ppl how how how....
Google "overclock Amd windsor"
but personally i suggest don't oc it... 3ghz for windsor is eating a lot power already...
more overclock for it will eat more power that increase the electric bill only.
*

K8 running 3.0GHz is somewhere near the limit.
pure power heat flex.gif
FK003
post Feb 10 2009, 10:34 AM

New Member
*
Junior Member
25 posts

Joined: Sep 2008
From: hillside
Thank you SIFU, i will go google and search for it. biggrin.gif
cschun86
post Feb 10 2009, 12:47 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(AceCombat @ Feb 10 2009, 01:43 AM)
i'm not college or university gin na.
i'm inside Skill Development. smile.gif
*
Big liar here tongue.gif
thteong82
post Feb 10 2009, 04:48 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
QUOTE(AceCombat @ Feb 7 2009, 01:28 AM)
here you go,u can click on my profile anytime to retrieve information over there.
016-4098398 Ace / KC
I can guide him anyitme la,should be an easy job for me smile.gif
anyway,X2 prince will be confirmed on tis friday.
I buka kedai kat i punya rumah,small overclock heaven there.
sure thing,will be updated smile.gif
*
Okok. Will call you when I ready with all the accessories. rclxm9.gif
AceCombat
post Feb 10 2009, 07:56 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(iBenQ @ Feb 10 2009, 02:16 AM)
Penang Skill Development Centre?? working there or studying? biggrin.gif
*
i'm only 13 years old this year,not yet qualify. laugh.gif
subrok007
post Feb 10 2009, 09:07 PM

Squirtle
******
Senior Member
1,632 posts

Joined: Oct 2007
From: Sea
ace, u lie us ar? u only 13 yrs old?
tachlio
post Feb 11 2009, 01:13 PM

de~sign "ing"
*******
Senior Member
3,102 posts

Joined: May 2005
From: Penang *̡͌l̡*̡̡
"she" big lies ~
OC4/3
post Feb 11 2009, 02:12 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(subrok007 @ Feb 10 2009, 09:07 PM)
ace, u lie us ar? u only 13 yrs old?
*
Whoever know who is ace know male or female or not laugh.gif
Not going to reveal here whistling.gif

This post has been edited by OC4/3: Feb 12 2009, 03:14 PM
thteong82
post Feb 11 2009, 06:09 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
QUOTE(OC4/3 @ Feb 11 2009, 03:12 PM)
Whoever know who is ace know he is male or female or not laugh.gif
Not going to reveal here whistling.gif
*
See the bold one. whistling.gif


Anyway, thanks for Ameno, Ace and others comment. I managed to lower down my HD temp after changing casing fan. thumbup.gif

Between, what you all put at casing front panel. Kinda waste, currently only have 1 DVD-RW. sweat.gif Any suggestions?

This post has been edited by thteong82: Feb 11 2009, 06:10 PM
cschun86
post Feb 12 2009, 10:32 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(thteong82 @ Feb 11 2009, 06:09 PM)
See the bold one.  whistling.gif
Anyway, thanks for Ameno, Ace and others comment. I managed to lower down my HD temp after changing casing fan.  thumbup.gif

Between, what you all put at casing front panel. Kinda waste, currently only have 1 DVD-RW.  sweat.gif  Any suggestions?
*
I like clean and sleek look,
I put nothing in front of my Cosmos S casing,
not even a DVD-RW coz only when formatting computer,
I just use the DVD-RW,
so, I just plug and format then unplug it.
shawnlut
post Feb 12 2009, 05:32 PM

±±±±±±
*****
Senior Member
837 posts

Joined: Oct 2007
From: Penang
Put some pictures maybe or toys.... tongue.gif tongue.gif icon_idea.gif icon_idea.gif
lohwenli
post Feb 13 2009, 12:12 AM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
QUOTE(cschun86 @ Feb 12 2009, 10:32 AM)
I like clean and sleek look,
I put nothing in front of my Cosmos S casing,
not even a DVD-RW coz only when formatting computer,
I just use the DVD-RW,
so, I just plug and format then unplug it.
*
Do the stealth mod on your DVD drive.
iBenQ
post Feb 13 2009, 03:26 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
anyone looking for gigabyte ex58-extreme or core2duo e4600, drop me a pm... urgent sales, wanna get something from @meno biggrin.gif
TS@meno
post Feb 13 2009, 11:09 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(cyberloner @ Feb 10 2009, 02:18 AM)
Good way is read read read than ask ppl how how how....
Google "overclock Amd windsor"
but personally i suggest don't oc it... 3ghz for windsor is eating a lot power already...
more overclock for it will eat more power that increase the electric bill only.
*
Hey bro, long time no see, where have u been.
Seems like among the old batch of F3 users, almost all jumped ship to intel eh...
Can't resist the temptation of the Quads?

3Ghz, if it was the old F3s, anytime will hit 3Ghz...
The power consumption actually not that hiong lar, our quads eat more now...tongue.gif

QUOTE(cschun86 @ Feb 10 2009, 12:47 PM)
Big liar here tongue.gif
*
Agreed hands and legs up...

QUOTE(thteong82 @ Feb 11 2009, 06:09 PM)
See the bold one.  whistling.gif
Anyway, thanks for Ameno, Ace and others comment. I managed to lower down my HD temp after changing casing fan.  thumbup.gif

Between, what you all put at casing front panel. Kinda waste, currently only have 1 DVD-RW.  sweat.gif  Any suggestions?
*
Haha, dun worry, this thread was meant to share on all PC information and knowledge among PC enthusiast esp those from Penang area.

QUOTE(cschun86 @ Feb 12 2009, 10:32 AM)
I like clean and sleek look,
I put nothing in front of my Cosmos S casing,
not even a DVD-RW coz only when formatting computer,
I just use the DVD-RW,
so, I just plug and format then unplug it.
*
Same as i, i'll usually get Lian Li Bezels for Ah Lian and try to make it as unobvious as possible. Lohwenli's stealth mod is not bad too.

QUOTE(iBenQ @ Feb 13 2009, 03:26 AM)
anyone looking for gigabyte ex58-extreme or core2duo e4600, drop me a pm... urgent sales, wanna get something from @meno biggrin.gif
*
Lol, fast fast sell...So u can fast fast buy...For those who are looking for PSU, i got 1 for sale also...500w true power modular, come show some support lar...tongue.gif
http://forum.lowyat.net/topic/927291
iBenQ
post Feb 13 2009, 07:41 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
no1 seems interested... and also, some offer ***king low price for my stuff @@

Added on February 13, 2009, 8:19 pm@meno, do pm me ur hp number... wanna do some discussion liao biggrin.gif

This post has been edited by iBenQ: Feb 13 2009, 08:19 PM
cschun86
post Feb 14 2009, 12:55 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
haha, I cant afford any hardwares updates liao,
just bought a new bike,
need to tie up my belt for months liao...
thteong82
post Feb 14 2009, 03:00 AM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
Every expert here, this is my "1st timer" overclocking. Bump some HTT multiplier and ram timing. Based on the screen shot, can I go further more? notworthy.gif

All using stock cooler.

[attachmentid=802398]
lohwenli
post Feb 14 2009, 12:03 PM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
QUOTE(thteong82 @ Feb 14 2009, 03:00 AM)
Every expert here, this is my "1st timer" overclocking. Bump some HTT multiplier and ram timing. Based on the screen shot, can I go further more?  notworthy.gif

All using stock cooler.

[attachmentid=802398]
*
Its not bad at all for a first attempt. You're lucky to be using a processor stepping that is relatively cool while overclocking, most of the other Ahtlons would have heat problems at the clockspeed you're running, yours is the exception. You can still go further, but the increased voltage that will be required will mean a better cooler would be recommended.
shiloong7081
post Feb 14 2009, 02:53 PM

Enthusiast
*****
Senior Member
928 posts

Joined: Jul 2006
can recommend good casing with good airflow besides CM 690 ? budget agak around rm250-270,and which shop can get it
metsatsu
post Feb 15 2009, 12:19 AM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(OC4/3 @ Feb 11 2009, 02:12 PM)
Whoever know who is ace know  male or female or not laugh.gif
Not going to reveal here whistling.gif
*
maybe both? shocking.gif

btw, just wanna show my oc result for my Galaxy GTX 295. not maxed out yet.

» Click to show Spoiler - click again to hide... «


This post has been edited by metsatsu: Feb 15 2009, 12:20 AM
AceCombat
post Feb 15 2009, 12:36 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
@metsatsu
ur proc can go much more smile.gif
metsatsu
post Feb 15 2009, 12:38 AM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
QUOTE(AceCombat @ Feb 15 2009, 12:36 AM)
@metsatsu
ur proc can go much more smile.gif
*
I know, but my mobo sux. X38 eat sh|t
cyberloner
post Feb 15 2009, 01:51 AM

Regular
******
Senior Member
1,560 posts

Joined: May 2005
From: Penang
QUOTE(@meno @ Feb 13 2009, 11:09 AM)
Hey bro, long time no see, where have u been.
Seems like among the old batch of F3 users, almost all jumped ship to intel eh...
Can't resist the temptation of the Quads?

3Ghz, if it was the old F3s, anytime will hit 3Ghz...
The power consumption actually not that hiong lar, our quads eat more now...tongue.gif
Me still around ... Just quiet only and spying you guys... lol
Me thinking about Phenom II now ler =P
True .. the Quad eat more power... Pocket hurt nia when the bills comes ...
You take care bro smile.gif

Added on February 15, 2009, 1:55 am
QUOTE(AceCombat @ Feb 15 2009, 12:36 AM)
@metsatsu
ur proc can go much more smile.gif
*
Go more eat more power.... Bills expensive ler tongue.gif

This post has been edited by cyberloner: Feb 15 2009, 01:55 AM
AceCombat
post Feb 15 2009, 09:42 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(cyberloner @ Feb 15 2009, 01:51 AM)
Go more eat more power.... Bills expensive ler  tongue.gif
*
tak apa la~~~ janji ada performance tongue.gif
shaun3230
post Feb 15 2009, 01:12 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
why oc when u care about bills? If u care about how much electricity, the uc the cpu
shawnlut
post Feb 15 2009, 11:44 PM

±±±±±±
*****
Senior Member
837 posts

Joined: Oct 2007
From: Penang
POC Penang kia, OC is our hobby.... thumbup.gif thumbup.gif cheers.gif
cyberloner
post Feb 16 2009, 12:03 AM

Regular
******
Senior Member
1,560 posts

Joined: May 2005
From: Penang
QUOTE(shaun3230 @ Feb 15 2009, 01:12 PM)
why oc when u care about bills? If u care about how much electricity, the uc the cpu
*
Power consuming per performance... Eat extra power with too little extra performance...
Go too high OC that burn pocket money ler....
Now economy slow bro... Bapak kaya nevermind lar....... tongue.gif
thteong82
post Feb 16 2009, 05:35 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
Hi guys, currently I am running X2 5000+ with 790GX integrated graphics.

In you all opinion, which should I upgrade :

1) Phenom 2
2) ATI 4850

Some image and video processing. Some games - mainly sport games.

This post has been edited by thteong82: Feb 16 2009, 05:36 PM
ah_khoo
post Feb 16 2009, 05:40 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(thteong82 @ Feb 16 2009, 05:35 PM)
Hi guys, currently I am running X2 5000+ with 790GX integrated graphics.

In you all opinion, which should I upgrade :

1) Phenom 2
2) ATI 4850

Some image and video processing. Some games - mainly sport games.
*
4850 for sure. smile.gif
cyberloner
post Feb 16 2009, 06:01 PM

Regular
******
Senior Member
1,560 posts

Joined: May 2005
From: Penang
Phenom II is worth for upgrade.
rainingzero
post Feb 16 2009, 06:11 PM

I miss my student life~
*******
Senior Member
2,497 posts

Joined: Jan 2006
From: Selangor
agreed...but for gaming purpose, maybe need better gc other than integrated stuff...nod.gif

long time didn't visit this thread. really miss u all...tongue.gif
AceCombat
post Feb 16 2009, 07:06 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
guys,i'm n00b in this.
Penang where can i find phone parts cheaper a bit?
thteong82
post Feb 18 2009, 09:06 AM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
QUOTE(ah_khoo @ Feb 16 2009, 06:40 PM)
4850 for sure.  smile.gif
*
QUOTE(cyberloner @ Feb 16 2009, 07:01 PM)
Phenom II is worth for upgrade.
*
So erm... Hard to choose. rclxub.gif
ah_khoo
post Feb 18 2009, 09:11 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(thteong82 @ Feb 18 2009, 09:06 AM)
So erm... Hard to choose.  rclxub.gif
*
for gamin, mid-high end discrete gfx is always better than onboard gfx. it's not that hard to choose if u ask me. d chip ur usin is not so bad, not like it's runnin @ 1.0GHz or wat rite? wink.gif

it's diff case for overclocker thou... smile.gif

This post has been edited by ah_khoo: Feb 18 2009, 09:13 AM
lichyetan
post Feb 18 2009, 11:16 AM

*****
*******
Senior Member
2,295 posts

Joined: Jan 2005
From: Penang
QUOTE(cyberloner @ Feb 16 2009, 12:03 AM)
Power consuming per performance... Eat extra power with too little extra performance...
Go too high OC that burn pocket money ler....
Now economy slow bro... Bapak kaya nevermind lar.......  tongue.gif
*
easier soltuion, use lower power comsumption machine when downloading... or downclock ur cpu to minimum when downloading... only OC it when u need performance... for my case i using NAS for my torrent and RS job... my PC is only on when i am studying or gaming... LOL tongue.gif
ah_khoo
post Feb 18 2009, 11:32 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(lichyetan @ Feb 18 2009, 11:16 AM)
easier soltuion, use lower power comsumption machine when downloading... or downclock ur cpu to minimum when downloading... only OC it when u need performance... for my case i using NAS for my torrent and RS job... my PC is only on when i am studying or gaming... LOL  tongue.gif
*
DFI's ABS is one of d solutions available... tongue.gif
iBenQ
post Feb 18 2009, 02:05 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(ah_khoo @ Feb 18 2009, 11:32 AM)
DFI's ABS is one of d solutions available...  tongue.gif
*
most mobo manufacturer now have energy saving features de lor, like gigabyte's ep models, and asus with their epu...

btw @meno, hows da dominator? ur ifx nice oso lor, but cant use backpipe cooler cos casing cant fit T_T, and i dun have proper fan yet for da heatsink @@
ktek
post Feb 18 2009, 05:14 PM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
QUOTE(iBenQ @ Feb 18 2009, 02:05 PM)
most mobo manufacturer now have energy saving features de lor, like gigabyte's ep models, and asus with their epu...
*

speechless sweat.gif it still won't beat manual underclock work.
overclockalbert
post Feb 19 2009, 12:44 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
Hi all POC member

where can i get good non-reference cooler design HD 4850 or GTX260 (216P) GC in Penang island.
it's time for me to get better GC.

rgds,
albert
iBenQ
post Feb 19 2009, 03:07 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
how bout asus 4850
idle 50c, load less than 70c for my case smile.gif
overclockalbert
post Feb 19 2009, 11:24 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
is it those big fan design asus 4850?
core/mem freq is 625/1900 default is it?
shiloong7081
post Feb 19 2009, 05:44 PM

Enthusiast
*****
Senior Member
928 posts

Joined: Jul 2006
QUOTE(AceCombat @ Feb 16 2009, 07:06 PM)
guys,i'm n00b in this.
Penang where can i find phone parts cheaper a bit?
*
OC-er yang melampau want to OC handphone now ? brows.gif
you can find them at BJ,got whole floor for handphone stuff
iBenQ
post Feb 19 2009, 08:01 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(overclockalbert @ Feb 19 2009, 11:24 AM)
is it those big fan design asus 4850?
core/mem freq is 625/1900 default is it?
*
the glaciator design, a lil noisy when 100%, but temp is quite good

default non factocy oc'ed core|mem clock is 625|1004 (2008)
AceCombat
post Feb 20 2009, 12:53 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(overclockalbert @ Feb 19 2009, 11:24 AM)
is it those big fan design asus 4850?
core/mem freq is 625/1900 default is it?
*
Albert koko,those Asus Glacitor fans are shit.
if you crossfire them,i can guarantee both card running 100c FOR SURE.

QUOTE(shiloong7081 @ Feb 19 2009, 05:44 PM)
OC-er yang melampau want to OC handphone now ?  brows.gif 
you can find them at BJ,got whole floor for handphone stuff
*
laugh.gif
just wanna buy some parts for my old Nokia N93,it's kinda hard to find the partts liao,cause old phone cry.gif
cschun86
post Feb 20 2009, 01:07 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
Ace, You have used DFI P45-JR b4? How is it?
btw, any POC member interested with my Proc, mobo, ram, casing?

This post has been edited by cschun86: Feb 20 2009, 01:08 AM
AceCombat
post Feb 20 2009, 08:11 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Chun,i never use any M-ATX mobo in my life.
trade ur mobo with my mobo brows.gif
overclockalbert
post Feb 21 2009, 01:18 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
QUOTE(cschun86 @ Feb 20 2009, 02:07 AM)
Ace, You have used DFI P45-JR b4? How is it?
btw, any POC member interested with my Proc, mobo, ram, casing?
*
bro, can pm me how much you wanna sell your stuff?

thanks
AceCombat
post Feb 21 2009, 12:00 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Albert,dont grab with me vmad.gif
hsienhsien
post Feb 21 2009, 01:08 PM

Safe Trader
******
Senior Member
1,490 posts

Joined: Feb 2008
From: somewhere around u
anyone know how to oc with laptop?
overclockalbert
post Feb 22 2009, 07:02 PM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
QUOTE(AceCombat @ Feb 21 2009, 01:00 PM)
Albert,dont grab with me vmad.gif
*
haha! ask for my friend only.

nvm you just go ahead.

selling mine for my friend biggrin.gif

So HD4850 really that hot?

then i might consider GTX260. anyone here have them already? how was the temp with this GC??

rgds
iBenQ
post Feb 22 2009, 08:18 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(overclockalbert @ Feb 22 2009, 07:02 PM)
haha! ask for my friend only.

nvm you just go ahead.

selling mine for my friend  biggrin.gif

So HD4850 really that hot?

then i might consider GTX260. anyone here have them already? how was the temp with this GC??

rgds
*
it can be that hot, if u stress both graphic card, in a casing that's FULLY closed with no exhaust fan, no intake, all passive

i never reached more than 80c pun when gaming with cf enabled

but since u going for gtx260, go for it man... performance wise, it beats 4850 biggrin.gif
AceCombat
post Feb 23 2009, 01:03 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(overclockalbert @ Feb 22 2009, 07:02 PM)
haha! ask for my friend only.

nvm you just go ahead.

selling mine for my friend  biggrin.gif

So HD4850 really that hot?

then i might consider GTX260. anyone here have them already? how was the temp with this GC??

rgds
*
I'm using GTX260+ 216SP withs stock fan laugh.gif

QUOTE(iBenQ @ Feb 22 2009, 08:18 PM)
it can be that hot, if u stress both graphic card, in a casing that's FULLY closed with no exhaust fan, no intake, all passive

i never reached more than 80c pun when gaming with cf enabled

but since u going for gtx260, go for it man... performance wise, it beats 4850 biggrin.gif
*
bro,i was testing by using a CM690 with an intake right beside them. rclxub.gif no need passive already go 100c,if passive,it wont last for a minute,btw,both card have been oced to 4870 speed already.
iBenQ
post Feb 23 2009, 04:46 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(AceCombat @ Feb 23 2009, 01:03 AM)
I'm using GTX260+ 216SP withs stock fan laugh.gif
bro,i was testing by using a CM690 with an intake right beside them. rclxub.gif no need passive already go 100c,if passive,it wont last for a minute,btw,both card have been oced to 4870 speed already.
*
hmm.. got try side intake as exhaust? i did dat and its doing 80c biggrin.gif, idle just around 53~55c
TS@meno
post Feb 23 2009, 03:04 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(iBenQ @ Feb 18 2009, 02:05 PM)
most mobo manufacturer now have energy saving features de lor, like gigabyte's ep models, and asus with their epu...

btw @meno, hows da dominator? ur ifx nice oso lor, but cant use backpipe cooler cos casing cant fit T_T, and i dun have proper fan yet for da heatsink @@
*
The dominator fan seems to be ok.
The airflow is pretty good. Should be doing a good job cooling down the pair of xtreems.

Haha, the backplate cooler, didn't you realise it looks so new? I did not even feel like fitting it on. Already know it won't fit, so wasting time trying...tongue.gif

For the fans, try get some 25mm Deltas to mount on the front and rear, and the center, get another 200cfm delta... drool.gif

Btw, i saw u guys were discussing about the 4850 or the GTX260 216SP.
I was wondering, why not go for a 4870 straight, get the Asus Dark KNight, the temps are pretty good for the 1gb version.
iBenQ
post Feb 23 2009, 10:19 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(@meno @ Feb 23 2009, 03:04 PM)
The dominator fan seems to be ok.
The airflow is pretty good. Should be doing a good job cooling down the pair of xtreems.

Haha, the backplate cooler, didn't you realise it looks so new? I did not even feel like fitting it on. Already know it won't fit, so wasting time trying...tongue.gif

For the fans, try get some 25mm Deltas to mount on the front and rear, and the center, get another 200cfm delta... drool.gif

Btw, i saw u guys were discussing about the 4850 or the GTX260 216SP.
I was wondering, why not go for a 4870 straight, get the Asus Dark KNight, the temps are pretty good for the 1gb version.
*
haha.... gonna get myself 3 pairs of delta 35mm when i get my pay biggrin.gif
200cfm delta dun1 la, learned my lesson, now ill buy a much less noisier ones biggrin.gif
overclockalbert
post Feb 26 2009, 02:55 PM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
i end up going with Asus 9800GX2 TOP .

so later if i already boring of it will try CF again, maybe 4870CF

as for GTX260, it's a nice GC as my cousin using them. it was a

Palit brand oc version.
cschun86
post Feb 26 2009, 05:16 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(overclockalbert @ Feb 26 2009, 02:55 PM)
i end up going with Asus 9800GX2 TOP .

so later if i already boring of it will try CF again, maybe 4870CF

as for GTX260, it's a nice GC as my cousin using them. it was a

Palit brand oc version.
*
Richie albert biggrin.gif
btw, I havent pm you the price coz still considering...
not sure wana go for i7 for p45 m-atx platform yet...
if confirm go for i7, will let u know the price that I wana let go smile.gif

albert, can you let me know your stock temperature for E8400? and wat cooler you are using?
@meno, can let me know the stock temperature of ur Q9550?
and wat CPU cooler you are using?

This post has been edited by cschun86: Feb 27 2009, 11:32 AM
overclockalbert
post Mar 2 2009, 03:08 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
my E84 was a C0 stepping , stock temp 3ghz idle very low hovering around 30C. i'm using Thermalright TRUE120 with single Vizo starlet UV led 120mm fan

if you are aftering cool and quite system, then E84 is the chip to consider. smile.gif E0 stepping will be much cooler in idle

This post has been edited by overclockalbert: Mar 2 2009, 03:10 AM
TS@meno
post Mar 2 2009, 05:55 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(cschun86 @ Feb 26 2009, 05:16 PM)
Richie albert biggrin.gif
btw, I havent pm you the price coz still considering...
not sure wana go for i7 for p45 m-atx platform yet...
if confirm go for i7, will let u know the price that I wana let go smile.gif

albert, can you let me know your stock temperature for E8400? and wat cooler you are using?
@meno, can let me know the stock temperature of ur Q9550?
and wat CPU cooler you are using?
*
My Q9550 @3.4Ghz, doing 48c when normal usage(Browsing+movie), never checked idle. Cooled using TRUE with Lau yah AC Ryan Dead LED fan..
Previously on IFX-14, on normal usage(Browsing+movie), Stock Speed, temp was around 43c.

I'm still thinking whether to switch to WC or stick to Air...

QUOTE(overclockalbert @ Mar 2 2009, 03:08 AM)
my E84 was a C0 stepping , stock temp 3ghz idle very low hovering around 30C. i'm using Thermalright TRUE120 with single Vizo starlet UV led 120mm fan

if you are aftering cool and quite system, then E84 is the chip to consider. smile.gif  E0 stepping will be much cooler in idle
*
Wah, not bad...30c only...
I look at my temps, i headache. If i push up to 3.8 (if the chip will do), that'll be a little too much for the TRUE to Handle.
metsatsu
post Mar 2 2009, 11:05 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
hi @meno, whats your max oc for your proc u can push ah? just wanna know how much a P45 can unlock
overclockalbert
post Mar 3 2009, 01:43 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
QUOTE(@meno @ Mar 2 2009, 06:55 PM)
My Q9550 @3.4Ghz, doing 48c when normal usage(Browsing+movie), never checked idle. Cooled using TRUE with Lau yah AC Ryan Dead LED fan..
Previously on IFX-14, on normal usage(Browsing+movie), Stock Speed, temp was around 43c.

I'm still thinking whether to switch to WC or stick to Air...
Wah, not bad...30c only...
I look at my temps, i headache. If i push up to 3.8 (if the chip will do), that'll be a little too much for the TRUE to Handle.
*
bro, just stick with air cooler. less problem. buy better fan 2pcs and do the push/pull config.
btw, do you have any kangtau for the true120 fan mount bracket? who selling them?
iBenQ
post Mar 3 2009, 10:58 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(@meno @ Mar 2 2009, 05:55 PM)
My Q9550 @3.4Ghz, doing 48c when normal usage(Browsing+movie), never checked idle. Cooled using TRUE with Lau yah AC Ryan Dead LED fan..
Previously on IFX-14, on normal usage(Browsing+movie), Stock Speed, temp was around 43c.

I'm still thinking whether to switch to WC or stick to Air...
Wah, not bad...30c only...
I look at my temps, i headache. If i push up to 3.8 (if the chip will do), that'll be a little too much for the TRUE to Handle.
*
right now, idle with 3 sanyo denki fans, 37-35-32-32 @ 1.152v biggrin.gif
load with linx 62-60-61-61 @ 1.168v biggrin.gif

like wat u said, need good fans.. previously using the cm 90cfm, temps were 66-66-65-65 @@

i oso had to relap the ifx, and reapply the thermal paste @@

overall, good performance biggrin.gif
lichyetan
post Mar 3 2009, 11:58 AM

*****
*******
Senior Member
2,295 posts

Joined: Jan 2005
From: Penang
QUOTE(@meno @ Mar 2 2009, 05:55 PM)
My Q9550 @3.4Ghz, doing 48c when normal usage(Browsing+movie), never checked idle. Cooled using TRUE with Lau yah AC Ryan Dead LED fan..
Previously on IFX-14, on normal usage(Browsing+movie), Stock Speed, temp was around 43c.

I'm still thinking whether to switch to WC or stick to Air...
Wah, not bad...30c only...
I look at my temps, i headache. If i push up to 3.8 (if the chip will do), that'll be a little too much for the TRUE to Handle.
*
not sure on the penryn, but wc with fuzion v2 and true120 on i7 difference are minimal... but i didnt try any true with me, just compare to others.. so mayb diff ambient gua... but in malaysia if w/o aircond temp almost same de...
salimbest83
post Mar 3 2009, 01:08 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
ermm.. mine oredi sold my cooler..
think to buy new one..
then no extra money edy..

stick with stock cooler..( the thin one)
and step back my clock to 3GHz ++ @ 1.25v
idle temp at night around 43-46 only..
during gaming can go to 55-60 only..( as usually no game use all 4 cores 100% like OCCt)
iBenQ
post Mar 3 2009, 01:49 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(salimbest83 @ Mar 3 2009, 01:08 PM)
ermm.. mine oredi sold my cooler..
think to buy new one..
then no extra money edy..

stick with stock cooler..( the thin one)
and step back my clock to 3GHz ++ @ 1.25v
idle temp at night around 43-46 only..
during gaming can go to 55-60 only..( as usually no game use all 4 cores 100% like OCCt)
*
usually la.... but gta4 = prime95 stress test to me.... siao boh @@
salimbest83
post Mar 3 2009, 02:14 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(iBenQ @ Mar 3 2009, 01:49 PM)
usually la.... but gta4 = prime95 stress test to me.... siao boh @@
*
GTA 4..emm..
im long time not playing new game oredi..

and im not really a 'GTA' type..
smile.gif
TS@meno
post Mar 3 2009, 02:37 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(metsatsu @ Mar 2 2009, 11:05 PM)
hi @meno, whats your max oc for your proc u can push ah? just wanna know how much a P45 can unlock
*
Never pushed beyond 3.4.
But now running 3.4Ghz on stock voltage with everything default.

QUOTE(overclockalbert @ Mar 3 2009, 01:43 AM)
bro, just stick with air cooler. less problem. buy better fan 2pcs and do the push/pull config.
btw, do you have any kangtau for the true120 fan mount bracket? who selling them?
*
TRUE fan bracket, earlier got one forumer sell some plastic ones.
If u want the metal clips, very expensive.
I heard it's RM60 per set, damn not worth, better take 2 cables tie the 2 fas together.

QUOTE(lichyetan @ Mar 3 2009, 11:58 AM)
not sure on the penryn, but wc with fuzion v2 and true120 on i7 difference are minimal... but i didnt try any true with me, just compare to others.. so mayb diff ambient gua... but in malaysia if w/o aircond temp almost same de...
*
Hmm, wierd...But on the penryns, air cooling seems to be not really sufficient.

QUOTE(iBenQ @ Mar 3 2009, 01:49 PM)
usually la.... but gta4 = prime95 stress test to me.... siao boh @@
*
Wah, 3 sanyo denki. Rich guy...
I used to run the IFX on some deltas, but soon stopped using them, too noisy. tongue.gif
iBenQ
post Mar 3 2009, 02:57 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
user posted image
brows.gif

rich meh use sanyo denki? its even cheaper than cm 90cfm biggrin.gif

This post has been edited by iBenQ: Mar 3 2009, 05:14 PM
OC4/3
post Mar 3 2009, 03:08 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(iBenQ @ Mar 3 2009, 02:57 PM)
» Click to show Spoiler - click again to hide... «

brows.gif

rich meh use sanyo denki? its even cheaper than cm 90cfm biggrin.gif
*
So rich laugh.gif
Sanyo Ace sell for like US$25+ per pieces wor sweat.gif
iBenQ
post Mar 3 2009, 03:22 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(OC4/3 @ Mar 3 2009, 03:08 PM)
So rich laugh.gif
Sanyo Ace sell for like US$25+ per pieces wor sweat.gif
*
huh =.="

i bought 3 of them, for RM85 =.=" the one on the middle is the lower amp, if not mistaken 0.24amp, while the other 2 is 0.52amp if not mistaken @@

now that u say that, i jz checked thru google for the logo, and yeah, its the same as the fans im having... so memang its sanyo denki hahaha... means i bought it cheap? biggrin.gif

This post has been edited by iBenQ: Mar 3 2009, 03:27 PM
cschun86
post Mar 3 2009, 03:34 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(@meno @ Mar 2 2009, 05:55 PM)
My Q9550 @3.4Ghz, doing 48c when normal usage(Browsing+movie), never checked idle. Cooled using TRUE with Lau yah AC Ryan Dead LED fan..
Previously on IFX-14, on normal usage(Browsing+movie), Stock Speed, temp was around 43c.

I'm still thinking whether to switch to WC or stick to Air...
Wah, not bad...30c only...
I look at my temps, i headache. If i push up to 3.8 (if the chip will do), that'll be a little too much for the TRUE to Handle.
*
Still stick with stock cooler better,
WC aint cheap...
TRUE need lapping job, after lapped,
it is monster biggrin.gif


QUOTE(overclockalbert @ Mar 3 2009, 01:43 AM)
bro, just stick with air cooler. less problem. buy better fan 2pcs and do the push/pull config.
btw, do you have any kangtau for the true120 fan mount bracket? who selling them?
*
QUOTE(@meno @ Mar 3 2009, 02:37 PM)
Never pushed beyond 3.4.
But now running 3.4Ghz on stock voltage with everything default.
TRUE fan bracket, earlier got one forumer sell some plastic ones.
If u want the metal clips, very expensive.
I heard it's RM60 per set, damn not worth, better take 2 cables tie the 2 fas together.
Hmm, wierd...But on the penryns, air cooling seems to be not really sufficient.
Wah, 3 sanyo denki. Rich guy...
I used to run the IFX on some deltas, but soon stopped using them, too noisy. tongue.gif
*
LoL, aint that expensive for TRUE fan clip,
I am using 2 unit of AC Ryan fan to pull-push,
3.4Ghz of Q6600 run max 55C in air con room...

http://forum.lowyat.net/index.php?showtopic=681324&hl=

pcmoddingmy is selling TRUE fan clip,
RM17 each only...
I think he still have stock for it...
TS@meno
post Mar 3 2009, 05:04 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(iBenQ @ Mar 3 2009, 03:22 PM)
huh =.="

i bought 3 of them, for RM85 =.=" the one on the middle is the lower amp, if not mistaken 0.24amp, while the other 2 is 0.52amp if not mistaken @@

now that u say that, i jz checked thru google for the logo, and yeah, its the same as the fans im having... so memang its sanyo denki hahaha... means i bought it cheap? biggrin.gif
*
Actually industrial grade fans are not that expensive except if u buy brand new ones.
Most of these fans are stripped off servers.
I got some of mu high powered fans for prices of less than RM30 per piece, and from my understanding, that is considered expensive as well.

Btw, forget the CM 90cfm, tats a lousy fan.

QUOTE(cschun86 @ Mar 3 2009, 03:34 PM)
Still stick with stock cooler better,
WC aint cheap...
TRUE need lapping job, after lapped,
it is monster biggrin.gif
LoL, aint that expensive for TRUE fan clip,
I am using 2 unit of AC Ryan fan to pull-push,
3.4Ghz of Q6600 run max 55C in air con room...

http://forum.lowyat.net/index.php?showtopic=681324&hl=

pcmoddingmy is selling TRUE fan clip,
RM17 each only...
I think he still have stock for it...
*
Too bad the TRUE i'm using is only a temp solution.
I borrowed the TRUE from sonicscourge, i dun have a cooler now after selling the IFX off.
Thats y was thinking whether to get a TRUE or setup something based on a D-tek Fuzion 2,
cschun86
post Mar 3 2009, 05:38 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(@meno @ Mar 3 2009, 05:04 PM)
Actually industrial grade fans are not that expensive except if u buy brand new ones.
Most of these fans are stripped off servers.
I got some of mu high powered fans for prices of less than RM30 per piece, and from my understanding, that is considered expensive as well.

Btw, forget the CM 90cfm, tats a lousy fan.
Too bad the TRUE i'm using is only a temp solution.
I borrowed the TRUE from sonicscourge, i dun have a cooler now after selling the IFX off.
Thats y was thinking whether to get a TRUE or setup something based on a D-tek Fuzion 2,
*
Agree with the 90cfm CM fan,
the LED is so lousy, burn after sometime,
fan is cool though when it is new...
maybe good choice if u choosing the 90cfm black colour no LED one...

Regarding the water cooling,
uhm, the cost are high,
a good set will cost you RM800 like tat...

1st time installation are big headache...
time consuming and leakage problems...
but after that, for maintainence wise,
not tat much dust will accumulate,
just watch out the coolant lvl only...

on the other hand,
air cooling is just plug and play like USB tongue.gif
OC4/3
post Mar 3 2009, 06:15 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(iBenQ @ Mar 3 2009, 03:22 PM)
huh =.="

i bought 3 of them, for RM85 =.=" the one on the middle is the lower amp, if not mistaken 0.24amp, while the other 2 is 0.52amp if not mistaken @@

now that u say that, i jz checked thru google for the logo, and yeah, its the same as the fans im having... so memang its sanyo denki hahaha... means i bought it cheap? biggrin.gif
*
Good price thumbup.gif
But then again i gotten some panaflo low speed for below RM20 laugh.gif
iBenQ
post Mar 3 2009, 06:29 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(OC4/3 @ Mar 3 2009, 06:15 PM)
Good price thumbup.gif
But then again i gotten some panaflo low speed for below RM20 laugh.gif
*
if the cfm is good, i wan it biggrin.gif... otherwise, peh~

if my pc is silent, i wont feel the "oomph"... must have some noise 1 biggrin.gif... too bad the shop dats selling the sanyo denki run out of stock, only left those tri-blade delta fans
to fill up my pc with those fans, its gonna cost me the equivalent of 1 1/5 sunbeam ccf T_T
lichyetan
post Mar 4 2009, 12:37 AM

*****
*******
Senior Member
2,295 posts

Joined: Jan 2005
From: Penang
lol.. for me silent is everything...

oh ya, my current setup running with fans with 7v or 5v mode only with those crappy CM 90cfm fan... mayb tis the main fact it perform slightly better than the true, mayb it will better with larger radiator or higher speed fan...

so @meno, try WC la... LOL... poison~ brows.gif
OC4/3
post Mar 4 2009, 04:34 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(iBenQ @ Mar 3 2009, 06:29 PM)
if the cfm is good, i wan it biggrin.gif... otherwise, peh~

if my pc is silent, i wont feel the "oomph"... must have some noise 1 biggrin.gif... too bad the shop dats selling the sanyo denki run out of stock, only left those tri-blade delta fans
to fill up my pc with those fans, its gonna cost me the equivalent of 1 1/5 sunbeam ccf T_T
*
Same,non silent system sound cool laugh.gif
My front fan is High Speed Yate Loon at full speed(Turbulence make it sound really loud),Top fan is 8CM Sunon low amp but seem like noisy brows.gif
Radiator fan is 2xhigh speed yate loon + one mid speed yate loon inside radbox,and exhaust fan is stock lian li blue led 1500rpm
Silent freak will complain laugh.gif
are_lee39
post Mar 4 2009, 06:25 PM

New Member
*
Junior Member
30 posts

Joined: Aug 2008
after oc, hard to silent anymore lo.... liquid cooler or nitrogen spray can ah...? hehhe..
overclockalbert
post Mar 5 2009, 05:24 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
QUOTE(OC4/3 @ Mar 4 2009, 05:34 PM)
Same,non silent system sound cool laugh.gif
My front fan is High Speed Yate Loon at full speed(Turbulence make it sound really loud),Top fan is 8CM Sunon low amp but seem like noisy brows.gif
Radiator fan is 2xhigh speed yate loon + one mid speed yate loon inside radbox,and exhaust fan is stock lian li blue led 1500rpm
Silent freak will complain laugh.gif
*

that much of fan will keep me awake all night long biggrin.gif

i'm revert back to semi silent setup.

using sunbeam fan controller to slow down my fan speed.



This post has been edited by overclockalbert: Mar 5 2009, 05:26 AM
ktek
post Mar 5 2009, 11:48 AM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
anyone got spare powder supply to borrow /rent?
FMA go RMA cry.gif
TS@meno
post Mar 5 2009, 01:11 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(ktek @ Mar 5 2009, 11:48 AM)
anyone got spare powder supply to borrow /rent?
FMA go RMA cry.gif
*
Buy Darnell's Noistaker 600w...
Then when FMA come back, sell it off...tongue.gif

Btw, still thinkin of WC, let me see how 1st...
Maintaining hobbies is costly, need to split between my Camera and PC now... sad.gif
Lichyetan, any nice stuff for WC to recommend? Cheap and nice stuff.
I was earlier thinking of a budget of RM500 only for everything, but after considering getting a Fuzion V2, seems like 500 will not be enough...sad.gif

Btw, nobody go support our fellow POC member here ar?
http://forum.lowyat.net/topic/954348
OC4/3
post Mar 5 2009, 05:28 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(@meno @ Mar 5 2009, 01:11 PM)
Buy Darnell's Noistaker 600w...
Then when FMA come back, sell it off...tongue.gif

Btw, still thinkin of WC, let me see how 1st...
Maintaining hobbies is costly, need to split between my Camera and PC now... sad.gif
Lichyetan, any nice stuff for WC to recommend? Cheap and nice stuff.
I was earlier thinking of a budget of RM500 only for everything, but after considering getting a Fuzion V2, seems like 500 will not be enough...sad.gif

Btw, nobody go support our fellow POC member here ar?
http://forum.lowyat.net/topic/954348
*
Errr adrian,it might be possible but take used parts laugh.gif
Heater Core
Nirox P2800 Moded
Generic Tubing
T Line + Fillport
Distill water + Bryan biocide
Custom shroud
High CFM fan
And used block
Still over RM500 lar biggrin.gif
lohwenli
post Mar 5 2009, 09:03 PM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
Adrian,

Cost breakdown of lowest cost, high-performance water cooling

Old heatercore/radiator from car/bike -RM100
Nirox P2800 modded -RM40
Generic tubing -RM4
T-line -RM20
Battery water (equivalent to distilled water) -RM4
High CFM fan -RM40 each
Fuzion 2 block -RM320 (new)

Total: RM528 with 1 fan and brand new block

What you lose by skimping
-Old radiator is probably dirty, rusty and lacks proper hose connections. You'll need to flush, de-rust and mod the thing before you can use it. Plus side is you'll probably get a better rad for a fraction of the price, though it'll take up more space.
-No reservoir, bleeding air with a t-line isn't as easy as it sounds. Expect to spend half hour or more each time you need to do it.
-No fungicide or anti corrosion additives. You'll have to change water more often, though by comparision to other downsides this is pretty minor. Corrosion is more of a headache though, you'll have to double check that all the parts touching the water are either non-metal or copper (since fuzion's base is copper). Then again, anti-corrosion additives or not, mixing metals in a WC loop is just a really bad idea.
-High CFM fan means lotsa noise. And you'll need it to be high CFM cos most car/bike rads are pretty restrictive. Alternative is more fans in parallel and/or push-pull, then you can turn down the speed, but means more money in fans.


Plus side is you have a full WC set running, upgrading is fairly straightforward after that. And every upgrade adds a lot of bang for your buck, carrying forward from system to system is also a lot easier than with aircooling. Btw my WC setup is up and running on my AM2, getting a C2Q running hopefully by next week.
OC4/3
post Mar 5 2009, 09:29 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(lohwenli @ Mar 5 2009, 09:03 PM)
Adrian,

Cost breakdown of lowest cost, high-performance water cooling

Old heatercore/radiator from car/bike -RM100
Nirox P2800 modded -RM40
Generic tubing -RM4
T-line -RM20
Battery water (equivalent to distilled water) -RM4
High CFM fan -RM40 each
Fuzion 2 block -RM320 (new)

Total: RM528 with 1 fan and brand new block

What you lose by skimping
-Old radiator is probably dirty, rusty and lacks proper hose connections. You'll need to flush, de-rust and mod the thing before you can use it. Plus side is you'll probably get a better rad for a fraction of the price, though it'll take up more space.
-No reservoir, bleeding air with a t-line isn't as easy as it sounds. Expect to spend half hour or more each time you need to do it.
-No fungicide or anti corrosion additives. You'll have to change water more often, though by comparision to other downsides this is pretty minor. Corrosion is more of a headache though, you'll have to double check that all the parts touching the water are either non-metal or copper (since fuzion's base is copper). Then again, anti-corrosion additives or not, mixing metals in a WC loop is just a really bad idea.
-High CFM fan means lotsa noise. And you'll need it to be high CFM cos most car/bike rads are pretty restrictive. Alternative is more fans in parallel and/or push-pull, then you can turn down the speed, but means more money in fans.
Plus side is you have a full WC set running, upgrading is fairly straightforward after that. And every upgrade adds a lot of bang for your buck, carrying forward from system to system is also a lot easier than with aircooling. Btw my WC setup is up and running on my AM2, getting a C2Q running hopefully by next week.
*
Just use bryan biocide,it work smile.gif
AceCombat
post Mar 8 2009, 03:54 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Happy Birdday for little kid Brian (OC4/3)
iBenQ
post Mar 8 2009, 04:26 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
any1 noe wats the current price for rampage extreme? and where do i get it??
OC4/3
post Mar 8 2009, 09:19 AM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(AceCombat @ Mar 8 2009, 03:54 AM)
Happy Birdday for little kid Brian (OC4/3)
*
Thanks thanks ace mei mei biggrin.gif
lichyetan
post Mar 9 2009, 08:18 PM

*****
*******
Senior Member
2,295 posts

Joined: Jan 2005
From: Penang
QUOTE(@meno @ Mar 5 2009, 01:11 PM)
Buy Darnell's Noistaker 600w...
Then when FMA come back, sell it off...tongue.gif

Btw, still thinkin of WC, let me see how 1st...
Maintaining hobbies is costly, need to split between my Camera and PC now... sad.gif
Lichyetan, any nice stuff for WC to recommend? Cheap and nice stuff.
I was earlier thinking of a budget of RM500 only for everything, but after considering getting a Fuzion V2, seems like 500 will not be enough...sad.gif

Btw, nobody go support our fellow POC member here ar?
http://forum.lowyat.net/topic/954348
*
as OC4/3 and lohwenli mentioned, either premade kits or custom kit...

my recommendation go for:
D-Tek Fuzion v2,
Swiftech MCR-220QP,
Swiftech Micro Reservoir,
Swiftech MCP-655B.

not sure the pricing though, and da kit is same as mine... i also forgot how much i bought d, radiator bought years back, same as reservoir.

but the time i get should be cheaper cause now price will be higher due to economy problem... smile.gif
owikh84
post Mar 9 2009, 08:25 PM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(lichyetan @ Mar 9 2009, 08:18 PM)
as OC4/3 and lohwenli mentioned, either premade kits or custom kit...

my recommendation go for:
D-Tek Fuzion v2,
Swiftech MCR-220QP,
Swiftech Micro Reservoir,
Swiftech MCP-655B.

not sure the pricing though, and da kit is same as mine... i also forgot how much i bought d, radiator bought years back, same as reservoir.

but the time i get should be cheaper cause now price will be higher due to economy problem...  smile.gif
*
Ur wc kit cost almost RM1k
I will go for the same setup as urs except for Swiftech APOGEE GTZ, Res Rev2 and pump w/ speed ctroller
At the same time gonna mod my freezone too. hmm.gif
lichyetan
post Mar 9 2009, 10:12 PM

*****
*******
Senior Member
2,295 posts

Joined: Jan 2005
From: Penang
juz mod the freezone with additional radiator... might help... mayb the fluid go through the raddy 1st b4 cooled by the freezone's tec or the another way around.

can save up w/o changing the block and pump 1st... if its really not performing only change wb or pump. tongue.gif

make it just like the DELL's H2C hybrid cooling unit brows.gif
TS@meno
post Mar 12 2009, 09:17 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(lichyetan @ Mar 9 2009, 10:12 PM)
juz mod the freezone with additional radiator... might help... mayb the fluid go through the raddy 1st b4 cooled by the freezone's tec or the another way around.

can save up w/o changing the block and pump 1st... if its really not performing only change wb or pump.  tongue.gif

make it just like the DELL's H2C hybrid cooling unit  brows.gif
*
Bro, i've been wondering for some time how the H2C Hybrid works.
Could you please explain the concept so we could all benefit from it?

I've been trying to find information about it for quite sometime, but just could not get 1 unit to try dismantle and see...
zonlee
post Mar 12 2009, 10:31 AM

On my way
****
Senior Member
506 posts

Joined: Oct 2004
any one know where got people selling large casing ?? now many think cannot put insite the casing

anyone face the problem with Gigabyte GA-EP45-UD3R and Creative X-fi Extremegamer Fatal1ty Pro

i have problem Power On Self Test


TS@meno
post Mar 13 2009, 01:10 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(zonlee @ Mar 12 2009, 10:31 AM)
any one know where got people selling large casing  ?? now many think cannot put insite the casing

anyone face the problem with Gigabyte GA-EP45-UD3R and Creative X-fi Extremegamer Fatal1ty Pro

i have problem Power On Self Test
*
What sort of problem are you facing?
I don't quite understand it when u say Power On Self Test.
Do you mean you could not even power your system on with the X-Fi on it?
I have an Xtremegame Fatal1ty Pro as well and it sometimes gives some problem on my Giga mobo.
You'll need to have it mounted properly, say if it doesn't work, then try off the system and re-mount the card.
Once it's working, lock it in place and dun touch it anymore.
Tested another few X-Fi FPS on my mobo as well, and faced the same issue on every card.
lichyetan
post Mar 13 2009, 02:52 PM

*****
*******
Senior Member
2,295 posts

Joined: Jan 2005
From: Penang
QUOTE(@meno @ Mar 12 2009, 09:17 AM)
Bro, i've been wondering for some time how the H2C Hybrid works.
Could you please explain the concept so we could all benefit from it?

I've been trying to find information about it for quite sometime, but just could not get 1 unit to try dismantle and see...
*
gotto dig my hdd... last time got downloaded the technical sheet of h2c... got explain how it works inside...
mmohdnor
post Mar 15 2009, 02:49 PM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
guys, where to buy cheap n reliable DVD+R DL disc in penang eh?
any good shop and brand that u know off ?
so far i always buy verbatim ..

This post has been edited by mmohdnor: Mar 15 2009, 09:19 PM
faizal87
post Mar 17 2009, 04:27 PM

piko piko pong pong
******
Senior Member
1,384 posts

Joined: Jan 2007
From: shah alam@ ampang
can i know what is the max speed can i get from e6600?
mine already set to 3.6ghz by using my rig(signature below)

Added on March 17, 2009, 4:31 pm[quote=mmohdnor,Mar 15 2009, 02:49 PM]
guys, where to buy cheap n reliable DVD+R DL disc in penang eh?
any good shop and brand that u know off ?
so far i always buy verbatim ..
*

[/quote

ss computer next to pcdepot

This post has been edited by faizal87: Mar 17 2009, 04:31 PM
AceCombat
post Mar 18 2009, 12:23 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
if u have good batch u can get 3.8GHz and 4GHz daily use but it's not recommended.
faizal87
post Mar 18 2009, 08:48 PM

piko piko pong pong
******
Senior Member
1,384 posts

Joined: Jan 2007
From: shah alam@ ampang
i buy from allngap. i think it b2
.hmm..y u say not recommended.its dangeroues?
shaun3230
post Mar 18 2009, 11:03 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
Its pushing it to teh max ady. And u`ll have to need a very cooled WC set up
Fyonne
post Mar 19 2009, 10:14 AM

Enthusiast
Group Icon
VIP
904 posts

Joined: Nov 2006
From: Penang (Mainland)
guys wanna ask wats the safe temp for Yorkfield temp. 1st time OC quaddie here blush.gif
just got my PSU n cooler 2 days ago, tangan gatal but the temp somehow worries me doh.gif
SynHeng
post Mar 19 2009, 11:00 AM

Getting Started
**
Junior Member
51 posts

Joined: Apr 2008
Hi guys and girls, usually what is the safe temperature for hardisk, CPU, GPU, Northbridge and casing?
shaun3230
post Mar 19 2009, 04:03 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
HD, never monitored before. GPU, depends on what brand. Maybe just state all ur components and we can give u a rough idea
iBenQ
post Mar 19 2009, 06:48 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
WHY NO 1 GIMME KANGTAO FOR RAMPAGE EXTREME?? T_T lately i am always being ignored by forumers... wat did i do wrong T_T
OC4/3
post Mar 19 2009, 06:54 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(iBenQ @ Mar 19 2009, 06:48 PM)
WHY NO 1 GIMME KANGTAO FOR RAMPAGE EXTREME?? T_T lately i am always being ignored by forumers... wat did i do wrong T_T
*
Not much malaysian have it laugh.gif
Less then 20unit in country likely sweat.gif
lohwenli
post Mar 21 2009, 05:53 AM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
QUOTE(mmohdnor @ Mar 15 2009, 02:49 PM)
guys, where to buy cheap n reliable DVD+R DL disc in penang eh?
any good shop and brand that u know off ?
so far i always buy verbatim ..
*
Well, the two best disks known are Mitsubishi and Taiyo-Yuden. Kao Yek in both BJ and Prangin sells Mitsubishi, and the corner shop near Mega Online in Prangin also sells Mitsubishi. Thing is, I'm not sure if they have mitsubishi DL disks, if you really end up desperate ngbh (forumer) sells them.

I've never heard of anywhere selling Taiyo-Yuden, though I seem to recall someone once selling on either lelong or LYN.

This post has been edited by lohwenli: Mar 21 2009, 05:54 AM
PowerSlide
post Mar 21 2009, 08:21 AM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
guys, mind if i ask whats the best thermal paste on market now?

also my vga is dead cry.gif 4830 a good buy?
iBenQ
post Mar 21 2009, 08:27 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(PowerSlide @ Mar 21 2009, 08:21 AM)
guys, mind if i ask whats the best thermal paste on market now?

also my vga is dead  cry.gif 4830 a good buy?
*
some say tuniq tx2, some say arctic silver...
well, for price/performance, no doubt tuniq tx2 is better... but ive personally tested nanofusion against tuniq tx2... tx2 didnt perform as good as i expected biggrin.gif

as for 4830, its a good buy, if 4xx is ur budget biggrin.gif... mind telling me ur resolution? 4850 wasnt able to outperform my nvidia 9500gt at 1440x900 sad.gif
ktek
post Mar 21 2009, 10:20 AM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
QUOTE(iBenQ @ Mar 21 2009, 08:27 AM)
4850 wasnt able to outperform my nvidia 9500gt at 1440x900 sad.gif
*

98GT typo or g0d-like 95GT.. notworthy.gif
iBenQ
post Mar 21 2009, 10:25 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(ktek @ Mar 21 2009, 10:20 AM)
98GT typo or g0d-like 95GT.. notworthy.gif
*
seriously, 9500GT... to be exact, asus EN9500GT Magic 512MB DDR2 @@... the performance was same as my 9500gt... well, i tested in on GTA San Andreas though biggrin.gif, wit full high settings @ 1440x900... if u asked me how i tested it, i purposely do spinoff on the car and zoom to the exhaust, where all the smoke particles are at... both give me 18fps average smile.gif

This post has been edited by iBenQ: Mar 21 2009, 10:28 AM
AceCombat
post Mar 21 2009, 11:23 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(iBenQ @ Mar 21 2009, 10:25 AM)
seriously, 9500GT... to be exact, asus EN9500GT Magic 512MB DDR2 @@... the performance was same as my 9500gt... well, i tested in on GTA San Andreas though biggrin.gif, wit full high settings @ 1440x900... if u asked me how i tested it, i purposely do spinoff on the car and zoom to the exhaust, where all the smoke particles are at... both give me 18fps average smile.gif
*
Well,ATi performs bad in GTA IV.
Tested 4870 and GTX260 in same pc,a lot of difference in both card frame rate,i think the game "optimized" for nvidia card.
And the latest driver might be kacau.
iBenQ
post Mar 21 2009, 12:24 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(AceCombat @ Mar 21 2009, 11:23 AM)
Well,ATi performs bad in GTA IV.
Tested 4870 and GTX260 in same pc,a lot of difference in both card frame rate,i think the game "optimized" for nvidia card.
And the latest driver might be kacau.
*
san andreas la bro @@ but since u said gta4, could it be due to the physx in nvidia's card? since ati doesnt have any physx biggrin.gif

This post has been edited by iBenQ: Mar 21 2009, 12:25 PM
PowerSlide
post Mar 21 2009, 08:17 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
im on 1680X1050 res laa..hd4830 seems a good buy as i found cheapest in lyn RM375 brows.gif

but im ati camper..so not interested at nvidia tongue.gif
shaun3230
post Mar 22 2009, 12:45 AM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
laugh.gif get what suits u then. i just go for the best bang per buck
PowerSlide
post Mar 22 2009, 05:15 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
get what suits my wallet laugh.gif

will hunt for 2nd hand 4830 laa tongue.gif
AceCombat
post Mar 23 2009, 12:54 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
just got a ATi 4550 today sweat.gif the card look tiny sweat.gif
btw,anyone wanna let go ATCS 840?
TS@meno
post Mar 23 2009, 11:46 AM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(PowerSlide @ Mar 22 2009, 05:15 PM)
get what suits my wallet  laugh.gif

will hunt for 2nd hand 4830 laa tongue.gif
*
Aiyo, wallet big people talk like this...
Where u hilang so long no sound?

Wei, grab HD4890, confirm+gerentee no regrets. (Then pinjam me play)
PowerSlide
post Mar 23 2009, 01:47 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
me where got wallet big laa..still using X2 no quad also..who system more great? tongue.gif

me always here laa..but this club getting quieter everyday maybe we should do gathering to spice things up

4890 doh.gif unless 489 bucks can laa tongue.gif i will sure pinjam u play brows.gif

shaun3230
post Mar 23 2009, 02:15 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
Since still x2, dont get anything more than the 4870 imo...
TS@meno
post Mar 24 2009, 02:08 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(PowerSlide @ Mar 23 2009, 01:47 PM)
me where got wallet big laa..still using X2 no quad also..who system more great?  tongue.gif

me always here laa..but this club getting quieter everyday maybe we should do gathering to spice things up

4890  doh.gif unless 489 bucks can laa  tongue.gif i will sure pinjam u play  brows.gif
*
I'm good.
Ok non-official TT invite.
Everyone who is interested please start suggesting venue and date and time.
We try to find one which suits everyone best.

QUOTE(shaun3230 @ Mar 23 2009, 02:15 PM)
Since still x2, dont get anything more than the 4870 imo...
*
Haha, ya...
Mr AV king knows that.
Dun worry, when he get a 4890, there'll be a reason for him to upgrade the X2 as well.
ktek
post Mar 24 2009, 03:18 PM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
@meno: what usually do when TT?
PowerSlide
post Mar 25 2009, 12:24 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
yea know that..but i cant afford 4870 also tongue.gif

so how..come u guys join TT laa..mostly saturday and sunday im ok, penang or b'worth also im ok but most u guys at penang so held at penang much easier..most important is u guys must come..dont ffk vmad.gif tongue.gif

any of u using this J&W 790gx extreme board? interesting board brows.gif




TS@meno
post Mar 26 2009, 10:18 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(ktek @ Mar 24 2009, 03:18 PM)
@meno: what usually do when TT?
*
Depends, sometimes is just pure hanging out and chatting, or sometimes we could plan some small side activities.
It's up to you guys yo suggest.

QUOTE(PowerSlide @ Mar 25 2009, 12:24 PM)
yea know that..but i cant afford 4870 also  tongue.gif

so how..come u guys join TT laa..mostly saturday and sunday im ok, penang or b'worth also im ok but most u guys at penang so held at penang much easier..most important is u guys must come..dont ffk  vmad.gif  tongue.gif

any of u using this J&W 790gx extreme board? interesting board  brows.gif
*
The J&W looks great, but the price...killing most wallets.
Maybe can ask Ace mei mei write a review on it.

Haha, speaking of FFK...Hmm, last TT kena few FFK cases. End up jz 5 person attend.
AceCombat
post Mar 27 2009, 12:42 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
i just finished a review on Arctic Cooling accelero Xtreme GTX280.
well,the cooler is perform better than HR03-GTX drool.gif end up i sold it cry.gif

when TT?
faizal87
post Mar 27 2009, 03:04 PM

piko piko pong pong
******
Senior Member
1,384 posts

Joined: Jan 2007
From: shah alam@ ampang
what 'TT' means?
ktek
post Mar 27 2009, 04:34 PM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
Teh Tarik session, hang out, talk c0ck chat, play new hardware etc.. whistling.gif
Ace, baru2 u kena FFK a lot. see u tomolo nite cool2.gif

This post has been edited by ktek: Mar 27 2009, 04:35 PM
TS@meno
post Mar 27 2009, 05:22 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(ktek @ Mar 27 2009, 04:34 PM)
Teh Tarik session, hang out, talk c0ck chat, play new hardware etc.. whistling.gif
Ace, baru2 u kena FFK a lot. see u tomolo nite cool2.gif
*
For those FFKers, the only thing i can say is, what goes around, comes around.
Whatever you do to others, will come back to happen on you someday, tats y we should forgive FFKers...Someday they will know wat it feels like being FFKed... tongue.gif

But if TT session, FFK, no excuses!!! Tat one unforgivable, cz no money involved... laugh.gif

KC, wat u wanna contribute this time for TT?
Any new stuff to let us play play and see see? Accelero Extreme, seems not bad, pinjam me play few days...tongue.gif
TT i belanja u AK(Ais Kosong).
metsatsu
post Mar 27 2009, 10:44 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
penang oc club still so kicking and alive. really wonder how the TT session is like. too bad i dun live in penang sad.gif

but that will change soon tongue.gif
AceCombat
post Mar 27 2009, 10:48 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(@meno @ Mar 27 2009, 05:22 PM)
For those FFKers, the only thing i can say is, what goes around, comes around.
Whatever you do to others, will come back to happen on you someday, tats y we should forgive FFKers...Someday they will know wat it feels like being FFKed... tongue.gif

But if TT session, FFK, no excuses!!! Tat one unforgivable, cz no money involved... laugh.gif

KC, wat u wanna contribute this time for TT?
Any new stuff to let us play play and see see? Accelero Extreme, seems not bad, pinjam me play few days...tongue.gif
TT i belanja u AK(Ais Kosong).
*
the Accelero Xtreme i sold long time ago.
tomolo i might be review 4890,stay tune smile.gif and next week i'll running Tri-SLi GTX260 with i7 again to get a final score of 3dMark smile.gif
iBenQ
post Mar 28 2009, 12:02 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(AceCombat @ Mar 27 2009, 10:48 PM)
the Accelero Xtreme i sold long time ago.
tomolo i might be review 4890,stay tune smile.gif and next week i'll running Tri-SLi GTX260 with i7 again to get a final score of 3dMark smile.gif
*
jz wanna ask lalamui, did u went to bj this afternoon? biggrin.gif i mean on friday afternoon tongue.gif... i overheard someone talking about P5Q Deluxe mobo on da phone in a shop biggrin.gif

This post has been edited by iBenQ: Mar 28 2009, 12:02 AM
PowerSlide
post Mar 31 2009, 07:43 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
my sis's x3 710 from ah jack brows.gif

user posted image
ktek
post Mar 31 2009, 09:09 PM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
nothing specia_ ZOMG fake quaddy spotted ph34r.gif
can push up to what speed?

This post has been edited by ktek: Mar 31 2009, 09:09 PM
PowerSlide
post Apr 1 2009, 02:29 PM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
QUOTE(ktek @ Mar 31 2009, 09:09 PM)
nothing specia_ ZOMG fake quaddy spotted ph34r.gif
can push up to what speed?
*
didnt push yet sad.gif

psu got problem return for exchange..psu back will test it blush.gif
mmohdnor
post Apr 3 2009, 11:57 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
any one use QX9650 with AC freezer 7 Pro?
whats the temp like?

i dont plan to overclock or buy new hsf for the time being ...


This post has been edited by mmohdnor: Apr 3 2009, 12:11 PM
salimbest83
post Apr 3 2009, 12:18 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang
QUOTE(mmohdnor @ Apr 3 2009, 11:57 AM)
any one use QX9650 with AC freezer 7 Pro?
whats the temp like?

i dont plan to overclock or buy new hsf for the time being ...
*
no problem normal use..no OCing rite
just under full load (OCCT,Burn tESt etc) temp will go to 60 or 70..
but who did that everyday..
overclockalbert
post Apr 4 2009, 05:01 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
should go for better aftermarket HSF since already using QX9650.
a good cooler is not that mahal afterall.
mmohdnor
post Apr 4 2009, 06:50 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star
what do u suggest i should replace it with ?

This post has been edited by mmohdnor: Apr 4 2009, 06:57 AM
AceCombat
post Apr 4 2009, 03:27 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Freezer 7 Pro is good choice. rclxms.gif
thteong82
post Apr 5 2009, 09:33 PM

Poor Guy
******
Senior Member
1,528 posts

Joined: Jan 2003
From: Penang
Hi every traders,

I just want to ask how much item worth if I plan to sold it.

AMD 7750 - 2 Month old
Asus M3A78-T - 3 Month old
Corsair XMS2 6400C4DHX 2GB x 2 - 3 Month old.
metsatsu
post Apr 5 2009, 11:34 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
hi guys, today i managed to have a look inside gadget zone in midlands before i came back to perak. boy, i was impressed by all the high end stuff they have in stock! I also spotted ASUS 4890!

P/S: not to mention, the reasonable price they offer! btw, can we bargain there?

This post has been edited by metsatsu: Apr 5 2009, 11:35 PM
tachlio
post Apr 6 2009, 08:21 AM

de~sign "ing"
*******
Senior Member
3,102 posts

Joined: May 2005
From: Penang *̡͌l̡*̡̡
QUOTE(thteong82 @ Apr 5 2009, 09:33 PM)
Hi every traders,

I just want to ask how much item worth if I plan to sold it.

AMD 7750 - 2 Month old
Asus M3A78-T - 3 Month old
Corsair XMS2 6400C4DHX 2GB x 2 - 3 Month old.
*
Every item 15-30% reduce from current price depend on the market demand. smile.gif
lichyetan
post Apr 6 2009, 12:18 PM

*****
*******
Senior Member
2,295 posts

Joined: Jan 2005
From: Penang
QUOTE(tachlio @ Apr 6 2009, 08:21 AM)
Every item 15-30% reduce from current price depend on the market demand.  smile.gif
*
ya, agree... sometimes 50% after 1 year... sad.gif
shawnlut
post Apr 6 2009, 02:03 PM

±±±±±±
*****
Senior Member
837 posts

Joined: Oct 2007
From: Penang
QUOTE(metsatsu @ Apr 5 2009, 11:34 PM)
hi guys, today i managed to have a look inside gadget zone in midlands before i came back to perak. boy, i was impressed by all the high end stuff they have in stock! I also spotted ASUS 4890!

P/S: not to mention, the reasonable price they offer! btw, can we bargain there?
*
Yes... Can bargain there...
Btw, when is TT ???
metsatsu
post Apr 6 2009, 04:06 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
How much discount can normally offer?
faizal87
post Apr 9 2009, 04:52 PM

piko piko pong pong
******
Senior Member
1,384 posts

Joined: Jan 2007
From: shah alam@ ampang
depends on waranty left or
Every item 15-30% reduce from current price depend on the market demand. hehe

bte,wanna ask what price q6600 2nd now?
torrentz
post Apr 11 2009, 01:20 PM

New Member
*
Junior Member
6 posts

Joined: Apr 2009
Hello There!!!
Anyone knows where i can get a Sapphire HD4830 in Penang Island? and if possible, pls let me know the price as well. I am very eager to get this little blue devil for my new low end gaming rig.

As i am on a very very tight budget, i am also looking at this case + PSU unit (JNC HJA-707) which PC Depot offers, and it claimed to come with a 22cm side fan and 450W PSU. Anyone has any idea or use this case before? what is the power efficiency like? if it has at least 65%, i will be more than happy.

With that said, my intention to go for Sapphire is obviously the bundled stuff (it has molex to 6 pin adapter!!! and DVI to HDMI!!!) I gave up ASUS EAH4830 after reading many user reviews which the fan making clunky noise and eventually died after 2 - 3 months (read it from newegg, almost 10% of users had this issue).


Except the graphic card, i am able to get the rest of parts that i want with the price listed:

Intel Pentium Dual Core E5200 - RM249
Gigabyte G31M-ES2L - RM192
Kingston Value ram KVR 800 2GB * 2 - RM160 (ram price increased!!!)
WD SATA 500GB - RM193
Lite-On DVD writer - RM82

Is the above price good?? Pls recommend me the shop to buy if you know better price offer!!!

Thanks!! this is my very 1st post over this forum!! cheers mate!!!

Added on April 11, 2009, 10:46 pmHello again!!
After some more surveying today, i am able to get the Sapphire 4830 card at GZ for RM399.

Now, left me 1 question, as i mentioned in my previous post, i was really on a very tight budget, so is this Casing + PSU unit (JNC HJA-707 - RM125) which PC Depot offers, and it claimed to come with a 22cm side fan and 450W PSU. Anyone has any idea or use this case before? what is the power efficiency like? Can the bundled PSU support my spec as below?

Intel Pentium Dual Core E5200 - RM249
Gigabyte G31M-ES2L - RM192
Corsair 2GB 6400C5 * 2 - RM180 (think that spend RM20 more on cool looking ram should be acceptable brows.gif offer by GZ)
WD SATA 500GB - RM193
Lite-On DVD writer - RM82
Sapphire HD 4830 - RM399

I will also install 1 more legacy 160GB IDE HDD

Any advice is very much appreciated!!!


This post has been edited by torrentz: Apr 11 2009, 10:46 PM
AceCombat
post Apr 12 2009, 06:55 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
i think u can get a better low cost psu like Acbel E2 or Cooler Master Extreme.
those are cheap smile.gif
torrentz
post Apr 12 2009, 11:47 PM

New Member
*
Junior Member
6 posts

Joined: Apr 2009

AceCombat, Thanks for the reply!! at the end i got this PowerLogic Modena GTX2000 case with 500W PSU (250W pure power).

So far the system running fine for 3 hrs, able to play Mirror's Edge @ 1680 * 1050 with no lag. smile.gif
shaun3230
post Apr 13 2009, 06:03 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
500w PSU with 250w true power? Enough for ur rig?
tryifelsecatch
post Apr 13 2009, 06:45 PM

Casual
***
Junior Member
474 posts

Joined: Mar 2009
hi penangKia:D

I am a P5Q3 user and first time Asus mobo, unfortunately i am having some issues, hope you guys can help.

i had created a thread HERE

basically 2 problem:

1. no beep sound when i don't attached RAM and boot.
2. go into BIOS and change any single thing (e.g. disable floppy), Save & Exit from BIOS, system power down to reboot, but it will not boot up. fan everything moving, LCD screen blank with the LED on standby.

i had tried clear CMOS with moving jumper, even replace the mobo battery. but no luck so far.
here's the spec:

CPU : Q9300
Mobo : P5Q3
RAM : DDR 1333Mhz 1GB X 2
HSF : CCF
HDD : 1 SATA 300GB
GPU : IceQ HD4670 Turbo (OC 780-->810MHz; 1000MHz-->1100MHz)
PSU : Thermaltake TR2 RX 550W

thanks notworthy.gif notworthy.gif
AceCombat
post Apr 13 2009, 08:15 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(tryifelsecatch @ Apr 13 2009, 06:45 PM)
hi penangKia:D

I am a P5Q3 user and first time Asus mobo, unfortunately i am having some issues, hope you guys can help.

i had created a thread HERE

basically 2 problem:

1. no beep sound when i don't attached RAM and boot.
2. go into BIOS and change any single thing (e.g. disable floppy), Save & Exit from BIOS, system power down to reboot, but it will not boot up. fan everything moving, LCD screen blank with the LED on standby.

i had tried clear CMOS with moving jumper, even replace the mobo battery. but no luck so far.
here's the spec:

CPU    : Q9300
Mobo  : P5Q3
RAM  : DDR 1333Mhz 1GB X 2
HSF    : CCF
HDD  : 1 SATA 300GB
GPU  : IceQ HD4670 Turbo (OC 780-->810MHz; 1000MHz-->1100MHz)
PSU  : Thermaltake TR2 RX 550W

thanks  notworthy.gif  notworthy.gif
*
First of all,u just boot ur pc (i assumed ur pc can be booted cause the condition 2 said that the pc can boot into bios.) dont change anything in bios and load setup default.
then,get other brand or model psu and boot ur pc,then go inside bios and change something that caused the pc unbootable last time,save and exit and wait for reboot,see is it booted? smile.gif
tryifelsecatch
post Apr 13 2009, 11:11 PM

Casual
***
Junior Member
474 posts

Joined: Mar 2009
hey ace, thanks again for your initiative!

okie, i have only a acbel 350W spare PSU. do you think its safe to boot up the system with it?
AceCombat
post Apr 17 2009, 10:41 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
no one go PC fair?

@Try
ur psu should be fine.
pmmonkey
post Apr 17 2009, 10:49 PM

Casual
***
Junior Member
485 posts

Joined: Oct 2006
From: Planet of the Apes
Tomorrow, after exam. Must go sibuk sibuk a little. Need to get a new keyboard also. Current one sot sot liao. Sometimes some keys cannot press.

Got nice kb recommendation? drool.gif
Ace mei mei, got anything special in PC Fair ar?
shaun3230
post Apr 17 2009, 10:49 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
QUOTE(tryifelsecatch @ Apr 13 2009, 11:11 PM)
hey ace, thanks again for your initiative!

okie, i have only a acbel 350W spare PSU. do you think its safe to boot up the system with it?
*
What specs? Surely not those in ur sig biggrin.gif

QUOTE(AceCombat @ Apr 17 2009, 10:41 PM)
no one go PC fair?

@Try
ur psu should be fine.
*
Nah, no time to go, and price in Mka pc fair is more expennsive than buying frm LYN
AceCombat
post Apr 18 2009, 12:31 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
@Monkey jie jie
wave.gif
this pc fair real suck,all ppl go buy HDD only,and not even one girl is better looking than u jie jie. drool.gif hensem punya boy boy also a little bit only.
as for keyboard,i dont see much also,all those cap ayam keyboard only.

@Shaun
yup,but there is still a lot of ppl going too smile.gif
hikari85
post Apr 18 2009, 12:39 AM

GTech Solutions
******
Senior Member
1,869 posts

Joined: Oct 2006
From: Penang
Hi Ace , you have went to pc fair just now? I'm going to pc fair tomorrow, anything interested promotion there?
shaun3230
post Apr 18 2009, 01:02 AM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
QUOTE(AceCombat @ Apr 18 2009, 12:31 AM)
@Monkey jie jie
wave.gif
this pc fair real suck,all ppl go buy HDD only,and not even one girl is better looking than u jie jie. drool.gif hensem punya boy boy also a little bit only.
as for keyboard,i dont see much also,all those cap ayam keyboard only.

@Shaun
yup,but there is still a lot of ppl going too smile.gif
*
My friend got a WD 320GB at 160 today, mine I bought in Dec was 150 rclxm9.gif


metsatsu
post Apr 18 2009, 02:45 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
Gonna go to pg penang pc fair 2day! Hope it will be good smile.gif

Added on April 18, 2009, 2:46 pmGonna go to pg penang pc fair 2day! Hope it will be good smile.gif

This post has been edited by metsatsu: Apr 18 2009, 02:46 PM
pmmonkey
post Apr 18 2009, 11:19 PM

Casual
***
Junior Member
485 posts

Joined: Oct 2006
From: Planet of the Apes
Really like shit la pcfair now a days... good keyboard also tarak. Laptop cooler all also those cheat people china stuff.

The broadband people all so scary, one whole line all serbu you non stop.
Crazy.
AceCombat
post Apr 18 2009, 11:47 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Monkey jie jie,
why no come find Ace meimei? cry.gif
pmmonkey
post Apr 19 2009, 12:02 AM

Casual
***
Junior Member
485 posts

Joined: Oct 2006
From: Planet of the Apes
i wanted to call you, but dun have ur number. Sorry lor...
AceCombat
post Apr 19 2009, 08:36 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
Monkey jie jie make Ace meimei
cry.gif cry.gif cry.gif cry.gif cry.gif cry.gif cry.gif cry.gif cry.gif


this is my number, 016-4098398,when jie jie see this thread,pls sms me ur number too oh smile.gif
cartack
post Apr 19 2009, 10:44 AM

Getting Started
**
Junior Member
151 posts

Joined: Dec 2007
guys..any shop in penang selling tx-2?
wxtye
post Apr 19 2009, 10:47 AM

Getting Started
**
Junior Member
237 posts

Joined: May 2008
From: Penang
nan yang sells them
cartack
post Apr 19 2009, 11:07 AM

Getting Started
**
Junior Member
151 posts

Joined: Dec 2007
nan yang???
shawnlut
post Apr 19 2009, 05:56 PM

±±±±±±
*****
Senior Member
837 posts

Joined: Oct 2007
From: Penang
QUOTE(cartack @ Apr 19 2009, 10:44 AM)
guys..any shop in penang selling tx-2?
*
You mean Tuniq TX-2 ??
Advancetech at Bkt. Jambul Complex...
overclockalbert
post Apr 20 2009, 01:33 AM

Regular
******
Senior Member
1,058 posts

Joined: Apr 2006
From: Penang , Malaysia
c2pid fair i ever attend vmad.gif
really piss off vmad.gif
traffic jam summore vmad.gif
japanese sandle putus summore shocking.gif
oh..shit rclxub.gif

This post has been edited by overclockalbert: Apr 20 2009, 01:35 AM
lohwenli
post Apr 20 2009, 01:40 AM

Penang Overclockers Club
*****
Senior Member
971 posts

Joined: Aug 2006
From: Penang
QUOTE(pmmonkey @ Apr 18 2009, 11:19 PM)
Really like shit la pcfair now a days... good keyboard also tarak. Laptop cooler all also those cheat people china stuff.

The broadband people all so scary, one whole line all serbu you non stop.
Crazy.
*
Wanted to go PC fair today, but when I saw the jam I thought "forget it man".

I'm using Logitech Clavier Media, got it for 35-40 bucks in Mind Maker in Sg Dua (I know Mind Maker sucks, but hey, its only a keyboard). Quite happy with it, decent touch, on par with the Microsoft and Dell keyboards. Definitely better than your old Samsung even when it was new.
PowerSlide
post Apr 20 2009, 01:58 AM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
went on saturday and my sis bought a hdd from ace meimei wub.gif

but whats with the crowd..around 1pm out of parking everywhere..just madness

but i buy nth..hahaha as always
AceCombat
post Apr 20 2009, 02:28 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
@powerslide
that day Ace meimei wear sexy ma? wub.gif

@Albert
I didnt see u over there,what did u buy ?
ktek
post Apr 20 2009, 02:37 AM

小喇叭
********
All Stars
13,197 posts

Joined: Jul 2006
hai ace wave.gif
no sleep yet?
i saw u pushing the trolley like fast & furious & hawt drool.gif
cartack
post Apr 20 2009, 08:02 AM

Getting Started
**
Junior Member
151 posts

Joined: Dec 2007
QUOTE(shawnlut @ Apr 19 2009, 05:56 PM)
You mean Tuniq TX-2 ??
Advancetech at Bkt. Jambul Complex...
*
yup...tuniq tx-2..thnx bro thumbup.gif
do u know how much they r selling it? sweat.gif
faizal87
post Apr 20 2009, 01:18 PM

piko piko pong pong
******
Senior Member
1,384 posts

Joined: Jan 2007
From: shah alam@ ampang
QUOTE(cartack @ Apr 19 2009, 11:07 AM)
nan yang???
*
nanyang at perangin mall
big store there

Added on April 20, 2009, 5:16 pmwanna ask what is worth oc friendly ram to buy under bajet rm150-200.hehe
noob questn

This post has been edited by faizal87: Apr 20 2009, 05:16 PM
cartack
post Apr 20 2009, 05:55 PM

Getting Started
**
Junior Member
151 posts

Joined: Dec 2007
QUOTE(faizal87 @ Apr 20 2009, 01:18 PM)
nanyang at perangin mall
big store there

Added on April 20, 2009, 5:16 pmwanna ask what is worth oc friendly ram to buy under bajet rm150-200.hehe
noob questn
*
get team extreme lorr....last time i check the price was rm230 for 2g kit.... just add a bit more from ur budget thumbup.gif
iBenQ
post Apr 20 2009, 07:29 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
syiok lor u all, can buy things in pc fair... i no $ to buy, even if i wanna buy something, they dun have it... looking fore icute hdd swap bay @@
AceCombat
post Apr 21 2009, 09:36 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
wave.gif
anyone using Silverstone Raven in penang?
need help smile.gif
Lefty
post Apr 24 2009, 12:34 PM

Designer Piece
*****
Senior Member
750 posts

Joined: Jul 2006
From: Interior Design World !
sorry, off topic . any1 here know where can i get pc hardware in Penang. better stuff at price like lowyat ? for exampl performance ram , GC, those thing. mid to high end. thx
faizal87
post Apr 24 2009, 04:38 PM

piko piko pong pong
******
Senior Member
1,384 posts

Joined: Jan 2007
From: shah alam@ ampang
jus go perangin mall lor or meet karom
AceCombat
post Apr 24 2009, 09:28 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
QUOTE(Lefty @ Apr 24 2009, 12:34 PM)
sorry, off topic . any1 here know where can i get pc hardware in Penang. better stuff at price like lowyat ? for exampl performance ram , GC,  those thing. mid to high end. thx
*
if high end ,go swisspac.
if mid to high end,go GZ or Precess
if low end,find Ace meimei tongue.gif
» Click to show Spoiler - click again to hide... «
owikh84
post Apr 24 2009, 09:41 PM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
I want to intro one seller selling pc parts at cheapest and nego price in Penang thumbup.gif
===> hikari85
Lefty
post Apr 25 2009, 12:24 AM

Designer Piece
*****
Senior Member
750 posts

Joined: Jul 2006
From: Interior Design World !
QUOTE(AceCombat @ Apr 24 2009, 09:28 PM)
if high end ,go swisspac.
if mid to high end,go GZ or Precess
if low end,find Ace meimei tongue.gif
» Click to show Spoiler - click again to hide... «

*
thx for the info. can i know the location of the shop u mention above ? just moved back to penang !! huhu

also let me know if u are letting go any GC that is low end to u but high end to me. I just use 17" LCD and not hardcore gamer. just play game for leisure.

Added on April 25, 2009, 12:27 am
QUOTE(owikh84 @ Apr 24 2009, 09:41 PM)
I want to intro one seller selling pc parts at cheapest and nego price in Penang  thumbup.gif
===> hikari85
*
thx for the recommendation
that guy price nice ? or the service very good ? or both?

This post has been edited by Lefty: Apr 25 2009, 12:33 AM
owikh84
post Apr 25 2009, 10:55 AM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(Lefty @ Apr 25 2009, 12:24 AM)
thx for the recommendation
that guy price nice ? or the service very good ? or both?
*
So far I just notice that his price is cheap.
No idea about after sale service though..
metsatsu
post Apr 25 2009, 11:09 AM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
saw the swisspac's pricelist, kinda pricy from what i can see. do they give best price upon asking?
iBenQ
post Apr 25 2009, 02:14 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(metsatsu @ Apr 25 2009, 11:09 AM)
saw the swisspac's pricelist, kinda pricy from what i can see. do they give best price upon asking?
*
try asking and see, u might get discount RM10~RM15 from their price list.... hahahaha
Lefty
post Apr 25 2009, 03:53 PM

Designer Piece
*****
Senior Member
750 posts

Joined: Jul 2006
From: Interior Design World !
QUOTE(owikh84 @ Apr 25 2009, 10:55 AM)
So far I just notice that his price is cheap.
No idea about after sale service though..
*
the price he/she offer is about RM20 more than lowyat price. is it normal in Penang to have this type of price list ?
iBenQ
post Apr 25 2009, 04:13 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(Lefty @ Apr 25 2009, 03:53 PM)
the price he/she offer is about RM20 more than lowyat price. is it normal in Penang to have this type of price list ?
*
depending on the items, some might be cheaper, some might be more expensive by rm10~20, some might be more expensive till more than 100 biggrin.gif

but judging from his asus graphic cards, i'd say they're more expensive than wat i normally see smile.gif

This post has been edited by iBenQ: Apr 25 2009, 04:16 PM
AceCombat
post Apr 26 2009, 12:36 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
hikari85 price is not attracting me tongue.gif
anyway,swisspac is more expensive but i heard my friend told me before,their after sales service is very good rclxms.gif
iBenQ
post Apr 26 2009, 02:25 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(AceCombat @ Apr 26 2009, 12:36 PM)
hikari85 price is not attracting me tongue.gif
anyway,swisspac is more expensive but i heard my friend told me before,their after sales service is very good rclxms.gif
*
ure paying extra for the service dats y smile.gif RMA quite fast oso, provided the thing u rma their supplier got stock
Lefty
post Apr 26 2009, 10:45 PM

Designer Piece
*****
Senior Member
750 posts

Joined: Jul 2006
From: Interior Design World !
QUOTE(AceCombat @ Apr 26 2009, 12:36 PM)
hikari85 price is not attracting me tongue.gif
anyway,swisspac is more expensive but i heard my friend told me before,their after sales service is very good rclxms.gif
*
can i know the location of swiss pac? and the location of CZ and places for mid end stff thx.
TS@meno
post Apr 27 2009, 03:43 PM

It's "A Meh Noh" not Meno!!!
*******
Senior Member
2,386 posts

Joined: Jan 2003
From: Many calls it "Hell"
QUOTE(pmmonkey @ Apr 18 2009, 11:19 PM)
Really like shit la pcfair now a days... good keyboard also tarak. Laptop cooler all also those cheat people china stuff.

The broadband people all so scary, one whole line all serbu you non stop.
Crazy.
*
Haiya, Dell Keyboard mau? Want next time i see got cheap cheap one bor help u get one.
Wait for next month lar.

Btw, tats y i gave up going to PC Fair. Hopeless event. Parking and traffic sucks big time, and nothing special.
And ya, the boredband not co hawt chicks, scary...

QUOTE(AceCombat @ Apr 26 2009, 12:36 PM)
hikari85 price is not attracting me tongue.gif
*
Haiya, sure mar...Ace mei mei easy easy can get free parts...just need to wear sexy sexy a bit nia...tongue.gif
metsatsu
post Apr 27 2009, 10:04 PM

Chocolate Starfish
Group Icon
VIP
2,510 posts

Joined: Dec 2004
From: Penang Island and Bidor
actually how is swisspac compare to gadget zone? in terms of service, pricing and variety?
PowerSlide
post Apr 28 2009, 03:47 AM

----------
*******
Senior Member
6,035 posts

Joined: Jan 2003
From: Penang
actually TBH my experience buying things from swisspac and gadgetzone are good but not RMA

one bitter experience with swisspac left me gutted with their honesty and never a return customer, gadgetzone rma is slowwwwwwww

so far any stuff need RMA im sending elsewhere for help

**notes**

only share my experience..no intention spoiling any shop's name

tongue.gif
BigSaver
post Apr 28 2009, 03:53 AM

v(^_^)V
******
Senior Member
1,029 posts

Joined: Apr 2008
From: Earth
QUOTE(AceCombat @ Apr 26 2009, 12:36 PM)
hikari85 price is not attracting me tongue.gif
*
just COD with her last week, very friendly n fast response.i guest after service will be great too..penangties!grab this opportunities brows.gif
torrentz
post Apr 30 2009, 05:12 PM

New Member
*
Junior Member
6 posts

Joined: Apr 2009
QUOTE(shaun3230 @ Apr 13 2009, 06:03 PM)
500w PSU with 250w true power? Enough for ur rig?
*
Sorry for late reply, i can run it without much problem (no BSOD, no freeze during gaming). The only problem is it heat up real fast .. and i guess my mom will kill me when she see the TNB bill (because of low efficiency, the PSU need to draw extra 50% electricity)

so i end up bought an AcBel E2 Power 510W from hikari wink.gif
shaun3230
post May 2 2009, 06:44 PM

Look at all my stars!!
*******
Senior Member
2,369 posts

Joined: Aug 2008
Good choice there. Had one myself when I was using the 8800GT...

Just it can still cause BSOD after heavy gaming. Now with an R8 an 4870x2 rclxms.gif
cschun86
post May 2 2009, 08:54 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
I checked with hikari85,
but he/she seems not really clear about his/her product lol,
want to get the samsung spinpoint F1 harddisk,
and ask the one he/she put price is which one,
spinpoint F1 or Ecogreen F2,
both are totally different thing and price lol,
never get back to me =.="
faizal87
post May 3 2009, 12:14 AM

piko piko pong pong
******
Senior Member
1,384 posts

Joined: Jan 2007
From: shah alam@ ampang
cschun86-what ur idle temp when using true 120 extreme?

ps-any penang ppl wanna let go ur gc
do pm me k?
T-Mac1
post May 3 2009, 07:00 AM

New Member
*
Junior Member
34 posts

Joined: Mar 2005
QUOTE(owikh84 @ Apr 24 2009, 09:41 PM)
I want to intro one seller selling pc parts at cheapest and nego price in Penang  thumbup.gif
===> hikari85
*
recommend for this seller too, I have bought Gainward graphic card, Gigabyte laser gaming mouse, and Corsair Twin 2X2048-8500C5D (Dominator Tech) from her, the price I get some is match or lower than loywat price.

Corsair Twin 2X2048-8500C5D (Dominator Tech) only RM165 other forumer I saw was RM2XX

Their after sales service is good too, my pc have problem and they help me check and fix the problem for free. thumbup.gif

QUOTE(iBenQ @ Apr 25 2009, 04:13 PM)
depending on the items, some might be cheaper, some might be more expensive by rm10~20, some might be more expensive till more than 100 biggrin.gif

but judging from his asus graphic cards, i'd say they're more expensive than wat i normally see smile.gif
*
yeah, I notice too, some brand graphic card like asus/sapphire price is higher. End up I order Gainward HD4850 GS from her, and I like this card performance icon_rolleyes.gif
Heard that is the supplier price have mark up(Buildtron) so more expensive, I'm not sure about it.

Honestly I compare the Asus price on Swisspac, Gadgetzone, and some other dealer, hikari85 price is still better.


QUOTE(AceCombat @ Apr 26 2009, 12:36 PM)
hikari85 price is not attracting me tongue.gif
anyway,swisspac is more expensive but i heard my friend told me before,their after sales service is very good rclxms.gif
*
Which stuff not attracting you?
I have friend at swisspac work too, bought CM casing and linksys modem from them. Just too far from me and cpu, mobo, gc, ram ,hdd those price are quit high that's I bought from hikari85.

oh ya, AceCombat do you selling pc hardware too?

Added on May 3, 2009, 7:05 am
QUOTE(metsatsu @ Apr 27 2009, 10:04 PM)
actually how is swisspac compare to gadget zone? in terms of service, pricing and variety?
*
As I know, gadget zone most item just give 1 years warranty, swisspac same too, linksys they give me 1 year warranty but I heard is 3 years sad.gif

This post has been edited by T-Mac1: May 3 2009, 07:05 AM
cschun86
post May 3 2009, 12:12 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(faizal87 @ May 3 2009, 12:14 AM)
cschun86-what ur idle  temp when using true 120 extreme?

ps-any penang ppl wanna let go ur gc
do pm me k?
*
well, stock speed is around 42C
faizal87
post May 3 2009, 03:09 PM

piko piko pong pong
******
Senior Member
1,384 posts

Joined: Jan 2007
From: shah alam@ ampang
ok,
when 3.4ghz ? brows.gif
cschun86
post May 3 2009, 07:35 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(faizal87 @ May 3 2009, 03:09 PM)
ok,
when 3.4ghz ? brows.gif
*
around 48C
AceCombat
post May 8 2009, 10:06 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
T-MAc
I just love to take hardwares pictures smile.gif
owikh84
post May 9 2009, 01:07 AM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(AceCombat @ May 8 2009, 10:06 PM)
T-MAc
I just love to take hardwares pictures smile.gif
*
In before ejaculation laugh.gif
iBenQ
post May 11 2009, 03:56 AM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
finally back~.. jz finished serving 2 weeks suspension due to spamming biggrin.gif... any latest news?
trisx
post May 11 2009, 08:19 AM

Life is Full of BS eyh !
******
Senior Member
1,198 posts

Joined: Nov 2008
From: ~~BacK FroM HelL~~ Status: R.I.P
wah,my island
smile.gif

Added on May 11, 2009, 8:20 amfaizal,want my gc?
asus 8500 GT
smile.gif
in my rig rite now

This post has been edited by trisx: May 11 2009, 08:20 AM
OC4/3
post May 11 2009, 03:05 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(iBenQ @ May 11 2009, 03:56 AM)
finally back~.. jz finished serving 2 weeks suspension due to spamming biggrin.gif... any latest news?
*
Who ask you spam at hardware q&a laugh.gif
iBenQ
post May 11 2009, 04:24 PM

Regular
******
Senior Member
1,550 posts

Joined: Aug 2008
QUOTE(OC4/3 @ May 11 2009, 03:05 PM)
Who ask you spam at hardware q&a laugh.gif
*
hahahahahahaha.... nothing to do mar spam lor biggrin.gif
cschun86
post May 11 2009, 07:38 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
New Toys,
Panasonic Full HD 42" LCD TV & TV Cupboard

user posted image






New HDD 1TB x 2 units (from Jack koko)

user posted image
user posted image




@meno, got lubang for raptor? biggrin.gif
AceCombat
post May 11 2009, 09:24 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006
@Chun koko
today so lucky can meet u inside GZ,i was so desperate for 4GB of SO-Dimm RAM for my lappy tongue.gif mana tau all price jack up like shit.

***
Chun koko u still very hensem .... wub.gif wub.gif wub.gif
« Next Oldest · Overclockers United · Next Newest »
 

2 Pages  1 2 >Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.2201sec    0.39    6 queries    GZIP Disabled
Time is now: 6th December 2025 - 09:22 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.