need more answer on this questions .... please help!!!

that means after i upgraded the firmware to 3.71 M33 then i can straight play homebrew without adding in any software ? for the slim psp

btw , can i know wat is all the software that can put inside psp and use it ?

and why does ppl say if hardcore gamer uses a fat psp and if not a hardcore then uses the slim ? i tot the battery life is the same ?

and guyz can i know how to backup the psp ? totally backup everything , incase i bricked ....

pmand i tot different game got different loader ?

Hmm, technically u should b able to..Make sure u don't brick the psp slim or when u buy ask them to do it for u =_=..But if i'm not mistaken, nearly all homebrew games can work..not 100% all can run ^-^d

u look like gonna had a try..

---

Added on November 22, 2007, 8:40 pmeven in 3.60m33 also can run homebrew.. only there is limitation..

software.. this too hard to answer because outside there too many.. but this is known as homebrew...

about the thing.. maybe the psp fat compatibility better..? not sure about this..

backup.. use NAND tool..

This post has been edited by bububang: Nov 22 2007, 08:40 PM

one screen protector at the screen, another screen protector at the UMD door, when not in use place it in pouch,

my UMD door also got a scar.. i duno it cause by me or the technical assistant.. last time when i send for unbricking service he check my psp and it put on table then i look at he... then he only place on the top of pouch..

But after i take back.. i realize my psp had been opened i regret to send back to service.. i did told them.. it bricked when i try changing theme.. no other.. unbricking service..... But i too miss my psp.. and i try had more look.. suddenly found.. there is 2 screw lost!! (usb part) Because now quit busy so didnt go take back.. wait till end of november only go take

But then i take back i didnt really take a look on the UMD door.. Till 1 time i found my UMD got a scar.. It maybe cause by myself.. but my psp always on my bed.. i never put it on other place.. other then that, i put inside the pouch.. the scar only visible enough if take a closer look with light shine on it.. And there is some dust at the screen(inside), it didnt have when i bought it..

i wanna know wats the step to backup everything i really need a guide on this backuping ..... i saw some other forum said that they use pandora battery and pandora mspd ? wat is the perpouses ? NAND tool is to backup wat file ? i really scare , i scare it really bricked then OMFG ?!

bricks when tryong to change theme? not sure what this means - unmodded psp also cannot change theme? i thought i saw the option in the menu somewhere?

To unbrick. To backup your file, flash your PSP's flash0 and copy all your files to your desktop (dic, vsh, fonts etc tec)

That's all and why do you want to backup your files so bad?! Of course before starting pandora you have to backup it's eeprom.bin, Press square at the pandora's battery creator and you're done.

older firmware dont have any theme(PTF) files. so in order to change wallpaper,wave,gameboot,cintro,icon,sounds.. we have to flash it to flash0..or use cxmb plugin. that's why some slight mistake could brick the psp while replacing the theme.

i dun really understand wat u're saying .... flash psp's flash0 after flashing that still can copy all the files to desktop ?

and i wanna ask why some other ppl make pandora battery need to use soldering to solder the things inside the battery ?

i need step by step on doing pandora battery and mspd got any guides ? thx

---

Added on November 23, 2007, 4:29 pmafter doing some researches from this link http://forums.maxconsole.net/showthread.php?t=81424

i dun understand wat is the real perpouses to make pandora's battery and i doesnt understand these few lines need help here :
Stage 3 you cannot run since you will need a phat psp to copy these required files over. This is what had me stumped for a while. When I tried to boot the psp with the memory stick made with this GUI and the pandora battery it would go green but the memory stick would not be accessed. You will need to get the kd and registry directories from someone who has made a Slim magic memory stick. I asked around and got these and this was what was missing, I am sure if you 'google' or ask nicely someone will send these too you.

and these lines :

These are the necessary .prx .dregs etc.. that need to be accessed on boot up. The GUIs do not create these, I tried a few other GUIs as well none of them did. After I just copied these to the root of my memory stick, I replaced the pandora battery in the slim and WHOLA the memory stick was accessed and the psp shut down after a few seconds. You will not see anything on your screen as the 1.5 kernel does not display on new slim screen. The only way you can tell its working is orange MS access light and green light turning off. Then its safe to replace your battery with a standard one and reboot psp.

Enjoy your home brew. This is my first attempt to describe how to get this working so there may be parts I need to edit to describe better, but it drove me nuts for 8 hours to figure how to get a slim flashed with M33 firmware without a Phat PSP. With the hardware mod battery, it was now possible to flash without a Phat psp with just a few files and programs.

---

Added on November 23, 2007, 4:30 pmand 1 more question do we really need to remove the battery leg to make pandora battery ?

---

Added on November 23, 2007, 4:35 pmand wat firmware are u guyz using ? and kernel add on is for wat ?

This post has been edited by samliang: Nov 23 2007, 04:35 PM

1 question here,

is sony able to unbrick a totally bricked psp, without any nand backup?

dun care if dey charge $ or not...........

why not just use silicone skin? am using this:

http://image4.play-asia.com/640/67/pa.111780.1.jpg

because i do it wrongly.. that why.. now i know already.. so if not necessary dun touch the flash root.. especially for those who using slim without any backup..

---

Added on November 23, 2007, 8:20 pmActually when u finished create the backup.. there is a files created. The files is known as nand-dump.bin. Inside it contain all the files/info stored on the psp.

There is 2 step.. 1 is soft.. 1 is hard..
U try to search.. last time i found there is 1 side contain pic+guide so its easy and nice tutorial Moreover i didnt own psp fat.. this psp slim also is my 1st console.. duno how to do pandora and mspd. But i read from somewhere... psp new battery(s110-psp slim battery) cannot use to create as pandora battery.
.prx = plugin ->so far what i know
Last time i also read that, there is some GUI program will create pandora easily but some prefer manual because they know what are they doing. But somehow i found there is even 1 more easier.. no need psp fat to create this.. but.. i forgot the link
Pandora battery will boot the psp in different state.. its not normal boot.
1.5 kernal = so far i only know this is use to run homebrew program perfectly because most of the program outside there is created for 1.5.
Homebrew = for pc, we called this as application
hardware mod battery = this is what u ask just now, why they open their battery. hardware modded.. mean they didnt use software to create pandora battery
battery = from answer above u should understand now.. there is hard modded and soft modded.. it depend on which method u wan to use

kernal add on.. if u didnt plan to use homebrew program.. u can ignore this.. but this also answered above..

Sorry of my bad english if my explanation still make u hard to understand .. but i never create a pandora or magic memory.. so far i only know what is that.. but never try..

---

Added on November 23, 2007, 8:24 pm

wow.. if like that we can ignore of apply screen protector?

How bout the UMD case behind? Last time i saw 1 silicone.. there is nothing protected it..UMD door there.. does this same?

This post has been edited by bububang: Nov 23 2007, 08:24 PM

izzit just me or i just found out that we can play PS1 games ad-hoc

no la.. it just came out.. - new release

This post has been edited by bububang: Nov 23 2007, 09:03 PM

bububang ok thx for the explanation .... so for the 3.71 M33-2 is it included with kernel 1.5 ? really noob in PSP

and can i know how to u make ur own back up if u din use pandora battery and MSPD ?

if u accidentally bricked can u restore the whole settings without using pandora battery and MSPD ?

hm.. the kernel only support for psp fat version..

i using homebrew application..

if brick need pandora and mspd but i still not sure la.. coz never try.. i only know pandora make psp boot in special state.. so the mspd put the nand dump? then from mspd u created.. there is 1 function to restore using nand dump..

i read from tutorial last time.. but never try.. so.. cant giv comment..

This post has been edited by bububang: Nov 24 2007, 02:16 AM

any differences between firmware 3.71 and 3.72 ??

as a conclusion , even how u bricked it , also can use NAND tool to restore backup ?

1 more question , can i know how u bricked ur psp last time ? by changing the theme can bricked ? wah very dangerous !! i scare ,i accidentally change it bricked also then die

This post has been edited by samliang: Nov 24 2007, 11:19 AM

guys see my newly cxmb on my PSP SLim...



these are some i used before;













This post has been edited by smokepsp32: Nov 24 2007, 11:56 AM