New PSU man, Wander how much you can push up from the 3.75GHz last time you got.

Welcome to the club man. Already registered,use 7800GS ....top AGP GC man... How is this card doing with your 3.2GHz proc?

Last time i also like that,stupid GC.9550 seems like is having some bugs in calculation.

[quote=fylon,Sep 26 2007, 09:37 AM]
running on 5:4 ratio which means his ram was clocked at 133mhz
FSB:MEM
1:1 = 200MHz (DDR400)
5:4 = 166MHz (DDR333)
3:2 = 133MHz (DDR266)

SUPERPI result depend more on CPU speed rather than MEM performance
unless strong CPU + EXTRA weak memory VS normal CPU + ULTRA speed memory ( unfair )

for Intel platform , memory timing isn't that important because
Intel use : CPU-NB-MEM
compared to AMD platform : CPU-MEM
there will always be a little delay in northbridge (chipset dependent) .

so , Intel OCers better aim for high-speed RAMs than tight timing which will cover back the delay in northbridge .
once again , aim for the highest CPU speed

since when i have 9550??

26 already, should cucuk atm grab the psu home la. fast fast install it and crush the wall. me and raymond sit there full of dust waiting your show with sang_karim la. XD

I agree but not totally. Even there is a delay on NB,NB to mem and mem to NB will do affect the performance too.Diffrent timing on the mem will gives faster or slower response to nb. While nb site we can adjust some timing too by using tweak865/875 . Higher CPU speed thus will be better is because of the compensate of the delay in both nb and mem.

[quote=kabukiawie,Sep 26 2007, 01:13 PM]
since when i have 9550??

26 already, should cucuk atm grab the psu home la. fast fast install it and crush the wall. me and raymond sit there full of dust waiting your show with sang_karim la. XD

[/quote]
Ya,full of dust already. Between,sang suddenly become so hardcore in o/cing already.Haha,maybe affected by fylon.

This post has been edited by raymond5105: Sep 26 2007, 01:29 PM

Opss.. Should me raymond GC not kabu! Haha.. Anyways, just rmb one of our member is having some weird reading with thier GC.

@kabu
Cannnot lo.. Gota wait got pay 1st then can grab!

@ray
Dont just watch movie la.. Haha! Take part also ma.. XD

Ya,was it the last time post with the 3D mark 03 with 10k+ one ? I posted before my old hdd kong.My GC is feel like not so good even though it's a Gecube. Overclocking like not really stable one.Regarding take part,i prefer to watch movie. Later i plan to pump in more juice on the vAGP after i finish install all softwares and test play games with my 9550.If there is any update sure i will post here.Don't worry.

sang karim & fylon, i standby my pop corn since monday, awaiting for your showdown...

haha...mine in halt liao. no matter how i tweak also hardly utilized. haha....just sometime run some benchi for fun.

Wah.. Cannot la.. We not movie maker! Anyways, i will left the show to sang i gues! Haha.. My cooling almost kong cannot OC too much. As AllnGap wasnt free atm so my deal with him will be postponed. Sang, the show is depend on u lo..

Oh fylon one the film maker can't make the show for the moment.Hehe,anyway fylon will be coming up later after his cooler and PSU come.For the moment sang will be the main actor.Guys ready for the show....

eh?? i thought that you are using the new duck from allgap. hmm......

like i said before, use zip tie to hang a 120mm fan on your hfs temporary la. now you have 3 guests already. Edministrator's popcorn almost finish la. XD

aiyo..suddenly on me aaa ... so much pressure lo .. lend me some high performance ram la .. than teach me to tweak it until got 4GHz ... the safe vcore for Prescott is 1.5V aa?? maybe gonna try push a little bit tonite ..

The card doing great man. But it also CPU bottleneck imo coz in Aquamark 3 score i juz can get 71k only @ 700/1400. With Futuremark 03 can get 16k. I'm using Corsair XMS 512MB x 2. With Powerlogic Magnum 450W/900W PSU. The motherboard holding me from OCing my sweet 3.2 babe coz of Asus P4P800-X issue that can't use SATA HDD while OC. I've done all sort of thing to fix this, flash mobo bios, lock PCI frequncies all sort of thing that might coz of the OC lock, but can't. Even a single MHz. If can OC my sweet babe, sure can make my baby fly...

using P4P800-X aa bro ... kabukiawie using the same mobo as urs and he's master about any problem the mobo facing .... i think he can help to sort out ur problem

Haha,need to borrow high performance RAM already.

I solute you because you have the high end AGP card.Me just using 9550 only. 16pl card with 6 vertax shader.So nice...You mobo ..why can't use SATA when o/c ? I've a same mobo with you but i'm using PATA.

Really? Where kabukiawie hiding? I need help here...

If u refer to asus website, it stated there that have prob with sata and OCing.
I have spare agp gfx card if u want to upgrade.XFX 6800GT 256MB/256-bit.I wanna let go since i ave 7800GS already.

This post has been edited by busta_dude: Sep 26 2007, 03:22 PM

didnt hide la, aiyo. and i am just not master of p4p800x. hahaha....just head8 with this budget mobo. all things limited.

i can oc with sata on for 2 years, but my sata hdd seems like sick already. now running my rig without any sata, ofcoz with oc la.

@busta_dude
what bios ver are you using now?? last time i use 1009 non beta. quite stable. currently using the latest beta. so far no problem.

are you using sata + pata?? or just sata alone?? btw, what psu are you using?? maybe psu not enough juice.

what is your max oc with that 3.2C?? gather information for all p4p800x user. so far raymond oced the best, from 2.6->3.3GHz stable no sweat, the best ocerclocker for p4p800x. hohoho........

*take deep breath and shout "raymond!!! where are you hiding~~~!!"

This post has been edited by kabukiawie: Sep 26 2007, 03:56 PM

Haha...good sense of humor u guys...
Bios version?If i'm not mistaken using 1009 from asus site. I use PATA + SATA. PSU i'm currently using is Powerlogic 450W true 900W peak power.This is the surprise I CAN'T OC EVEN A SINGLE MHZ RITE NOW i donno what the hell is going on with my board. Help me~~~~~~~~~~~~~~!!!

Yo pals.. Guess im using the same ram as u do. XMS!! Haha.. Whats ur ram rev? Mine was v5.1 and using Vitelic 5ns chip. Hm.. Using SATA cannot oc? Sure.. Die.. Gota make sure of this case 1st due im gona get a SATA for primary! Guys.. Any one can clarify this case pls? Hm.. Letting go ur 68GT? Unlockable? Might interested..

@kabu
Ur sata set as primary windows drive? Or just a slave/backup? Or ur PATA is the main drive?

No more unlocakable lor for 68GT.


This one i quote from asus site :
REFER HERE

Come.Come.Buy my 68GT.