limited budget to expend. even allo on klang vally also their lease most of their line to CD, astro and sometimes maxis

Just to share my experience for those interested:

On 13 June 2025, I completed the termination of the ALLO subscription (OKU package under my wife's name – 300Mb/s at RM69/month).

Then on 14 June 2025, I activated a new plan – 100Mb/s at RM49/month, which includes 6 months free.

The 6-month waiver was already reflected in my first bill today, as shown in the screenshot below.

For those whose contract has already ended and are fine with 100Mb/s speed, this is a no-brainer. Even the 1Gb/s package is a great deal at only RM139/month, with 6 months free.

Just a heads-up: this promo ends on 30 June 2025, so don’t wait too long if you're planning to switch.

Hope this helps anyone considering the change.



This post has been edited by sHawTY: Jun 14 2025, 04:23 PM

Just found out that ALLO has switched to using PPPoE for their connections.

This likely explains why my TP-Link Deco M4R stopped working after the free speed upgrade to the 300Mb/s plan, followed by the termination of that plan and the sign-up for the new 100Mb/s @ RM49 contract. Previously, I could connect the Deco M4R directly to the ONU and it would work without any additional configuration.

If you're experiencing a similar issue, it's likely due to the switch to PPPoE. You’ll need to enter the correct PPPoE credentials in your router’s settings—these are linked to your account and not included by default, so be sure to reach out to ALLO support if you don’t have them.

CGNAT or public ip is using PPPOE at sungai petani kedah,and no need VLAN TAGGING like unifi





This post has been edited by lowck: Jun 28 2025, 01:55 PM

Strange. My place in Cyberjaya still using IPOE for their Public IP.

maybe can request PPPOE,can try it,what ONU ALLO given at Cyberjaya



This post has been edited by lowck: Jun 28 2025, 07:58 PM

Lol. Why would I do that? IPOE is better than PPPOE . Still using their Calix Fibre modem over here.

I still recall what the CS rep told me when I first requested for public IP:

Private IP users = Use PPPOE
Fixed Public IP users (RM 150 on time fee) = Use IPOE(In the router WAN setting, they told me to set WAN setting to Automatic IP)

Not sure if that has changed since then.

Maybe new user is using PPPOE with PUBLIC IP, that day request PUBLIC IP one time charge rm100 ,CALIX ONU got overheat issue or not?
I using allo since Feb2025

This post has been edited by lowck: Jun 28 2025, 08:38 PM

Can you try do a trace route / pingplotter to shopee.com.my?

Curious to know if there's any difference on Allo public and private IP when it comes to routing and latency

So far no overheating issues with their CALIX ONU since I switched over to Allo from TIME back in July 2023.

u can check post 2456/2457 i got share result. SUNGAI PETANI KEDAH if u using unifi don't think too much change ALLO,but compare with TIME,i also want to know which one more stable

This post has been edited by lowck: Jun 28 2025, 11:19 PM

compare with TIME at cyberjaya which one better?latency routing

Actually I just subscribed to Allo, but the latency to Shopee is quite high almost 200ms, Not sure if it's because of the private IP.



This post has been edited by Azusa_San: Jun 28 2025, 11:39 PM

are u using lan or wifi? and what router are using





This post has been edited by lowck: Jun 29 2025, 12:18 AM

Looking at your current ping result, it seems likely that the issue is related to the private IP. I'm not sure what causes it, but the latency between Allo public and private IPs can show such a significant discrepancy.

So far, it seems only Shopee and some Microsoft websites are affected, while the rest are fine and the latency is even better than my Unifi.

The Allo CS isn't very helpful either; they just said they made some adjustments, but the result is still the same lol.

Btw, I'm using Mikrotik router and tested with wired connection.



Maybe someone using Allo with a private IP could test if they're experiencing the same issue as me?

This post has been edited by Azusa_San: Jun 29 2025, 03:16 AM

For my use cases, Allo has better routing than TIME.

gaming latency is ok?and u using at where ping 8.8.8.8 only 5ms


this unifi result with PUBLIC IP,ping higher than allo a litter bit



This post has been edited by lowck: Jun 29 2025, 01:47 PM

In Selangor

wah... 200 ms even using wired? with that ping how is that fibre

https://shopee.com.my/ malaysia shopee tested ya?



still the price per subscription plans very attractive, but not sure how good the latency but based on your result ...hmm...

When I received a speed upgrade from 100Mb/s to 300Mb/s in January 2025, Allo provided a new router. After that, my Deco M4R stopped working.

The same thing happened again when I terminated the old account and registered a new one. Curious, I checked the settings on Allo’s router and found it was configured to use PPPoE.

That’s when I realized why the M4R wasn’t working. I called their support line to request the PPPoE credentials, entered them into the M4R settings—and just like that, it was up and running again.

But hey, since the internet is solely for my in-laws—who only use it for watching TV and WhatsApp video calls—no harm done.

Not sure why they switched from IPoE to PPPoE—it seems like a questionable move.