Outline ·
[ Standard ] ·
Linear+
Q6600 Overclock and Temperature
|
Dickong
|
 Oct 5 2008, 07:25 AM
|
|
QUOTE(k!nex @ Oct 5 2008, 05:18 AM) ur chip is sure hot. for mine..is G0 stepping VID 1.275. i do 3.2Ghz 1.264V at idle, 1.21V at load. at ambient 24C like dat, my idle 32C, load 54C(prime95). btw, u lapped it to mirror finish got big difference in temperature drop?? u shud try IBT, 9 hrs of prime cannot show its full stability. u can pass 50 rounds of IBT den it's around 98%++ stable. take note of ur temps,u'll be shocked  You are lucky bro, to get low temp when load. Mine same vid with yours but i have to set to 1.325v to get 3.2g stable n my temp reach 60c when load.By the way i am curious how did you set your voltage to 1.264v when the bios setting of your mobo mininum is 1.275v. This post has been edited by Dickong: Oct 5 2008, 02:01 PM |
|
|
|
|
|
syahirax
|
Oct 5 2008, 01:58 PM
|
|
|
QUOTE(k!nex @ Oct 5 2008, 05:18 AM) ur chip is sure hot. for mine..is G0 stepping VID 1.275. i do 3.2Ghz 1.264V at idle, 1.21V at load. at ambient 24C like dat, my idle 32C, load 54C(prime95). btw, u lapped it to mirror finish got big difference in temperature drop?? u shud try IBT, 9 hrs of prime cannot show its full stability. u can pass 50 rounds of IBT den it's around 98%++ stable. take note of ur temps,u'll be shocked whats your exact vcore in bios?Do you sure your mobo doesnt have any vdroop at all?By the way,i didnt dare to run IBT.but so far so good for 3 ghz.I might be getting myself another Q6600 which is G0.hopefully it does have lower VID.Planning to archieve at least 3.4/3.6 ghz.:)How far you have push your proc?and what is the vcore?
Added on October 5, 2008, 1:59 pmQUOTE(Dickong @ Oct 5 2008, 07:25 AM) You are lucky bro, to get low temp whem load. My same vid with your but i have to set to 1.325v to get 3.2g n my temp reach 60c when load.By the way i am curious how did you set your voltage to 1.264 when the bios setting of your mobo mininum is 1.275v. just wondering bro,what is your Q6600 batch? This post has been edited by syahirax: Oct 5 2008, 02:00 PM |
|
|
|
|
|
Dickong
|
Oct 5 2008, 05:47 PM
|
|
|
QUOTE(syahirax @ Oct 5 2008, 01:58 PM) whats your exact vcore in bios?Do you sure your mobo doesnt have any vdroop at all?By the way,i didnt dare to run IBT.but so far so good for 3 ghz.I might be getting myself another Q6600 which is G0.hopefully it does have lower VID.Planning to archieve at least 3.4/3.6 ghz.:)How far you have push your proc?and what is the vcore?
Added on October 5, 2008, 1:59 pmjust wondering bro,what is your Q6600 batch? Mine is a GO stepping batch. |
|
|
|
|
|
uzairi
|
Oct 6 2008, 03:48 PM
|
|
|
Its G0 bro, not GO  |
|
|
|
|
|
remysix
|
Oct 6 2008, 05:18 PM
|
|
|
QUOTE(k!nex @ Oct 5 2008, 05:18 AM) ur chip is sure hot. for mine..is G0 stepping VID 1.275. i do 3.2Ghz 1.264V at idle, 1.21V at load. at ambient 24C like dat, my idle 32C, load 54C(prime95). btw, u lapped it to mirror finish got big difference in temperature drop?? u shud try IBT, 9 hrs of prime cannot show its full stability. u can pass 50 rounds of IBT den it's around 98%++ stable. take note of ur temps,u'll be shocked are u sure running IBT for 50 rounds is a good thing...10 is considered banyak edi...50 rounds  and that only proved to be 98%++ stable...ouch!!! |
|
|
|
|
|
LExus65
|
Oct 6 2008, 07:13 PM
|
|
|
i believe OCCT for 1 hours should be able to keep u stable for most games on the market already, no need to waste so much time lol...
|
|
|
|
|
|
uzairi
|
Oct 6 2008, 08:16 PM
|
|
|
Not to mention electricity bill too  |
|
|
|
|
|
tech_frix
|
Oct 6 2008, 09:49 PM
|
|
|
thats y we need to set lower Vcore...
mine @ 1.152v je...
but i'm using X3320...
sorry for jumping in...just a point to share with...
|
|
|
|
|
|
remysix
|
Oct 6 2008, 11:18 PM
|
|
|
errr...kinda OT but how much do u think a pc running stress test 24hrs, say using 750w of psu at 80% of efficiency...will it be really that much of $$$...just wondering loh
|
|
|
|
|
|
tech_frix
|
Oct 7 2008, 12:09 AM
|
|
|
i dont know but IMHO, d power suply oni suply d wattage dat we need...
so even if u using 1kilowatt psu, it still running what ur rig craving for...
it just my silly theory...
|
|
|
|
|
|
aLWAYStHEsAME
|
Oct 7 2008, 01:48 AM
|
|
|
50 rounds for IBT is to much i think, i just used with 10 loops at high memory, already good enough, stable and no problem |
|
|
|
|
|
tech_frix
|
Oct 7 2008, 09:14 AM
|
|
|
some said 10 loops equals to one hour OCCT...
|
|
|
|
|
|
remysix
|
Oct 7 2008, 12:54 PM
|
|
|
QUOTE(tech_frix @ Oct 7 2008, 09:14 AM) some said 10 loops equals to one hour OCCT... and yet some said 8 minutes of IBT (basically around 8 rounds) equals to 40 hrs of Prime95  |
|
|
|
|
|
aLWAYStHEsAME
|
Oct 8 2008, 02:47 AM
|
|
|
QUOTE(tech_frix @ Oct 7 2008, 09:14 AM) some said 10 loops equals to one hour OCCT... Not really, coz i used occt b4 and test passed for more than 12 hour but with ibt, it failed at 1st loop  ... IBT stressing hard on ur processor, and it produced more heat, so my opinion no need to run longer with ibt... save time and save money Try used IBT with higher memory(eg. 2Gb), it will take more time and more accurate |
|
|
|
|
|
tech_frix
|
Oct 8 2008, 09:02 AM
|
|
|
my temp stressing with IBT pretty dam low...
around 51c load...somtimes less....
|
|
|
|
|
|
aLWAYStHEsAME
|
Oct 8 2008, 12:39 PM
|
|
|
Damn nice temp... got SC... what processor and cooler u used, liquid arr?
|
|
|
|
|
|
syahirax
|
Oct 8 2008, 12:49 PM
|
|
|
51C while load runing IBT is amazing.im running mine and i got around 72C which a bit frightening me.
|
|
|
|
|
|
aLWAYStHEsAME
|
Oct 8 2008, 12:59 PM
|
|
|
Mine(Spec as my sig) got around 80++, very hot la |
|
|
|
|
|
syahirax
|
Oct 8 2008, 01:05 PM
|
|
|
currently at what vcore ure running at?
|
|
|
|
|
|
aLWAYStHEsAME
|
Oct 8 2008, 01:11 PM
|
|
|
1.45v, very high for 3.4ghz I think, donno how they tweak for a very low voltage, may be coz my processor not a good batch or my skill suck |
|
|
|
|
Quote
0.0309sec
0.62
6 queries
GZIP Disabled