Q6600 Overclock and Temperature
|
|
 Aug 19 2008, 03:26 AM
Return to original view | Post
#1
|
 
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned   
|
Hello guys, just bought my q6600 a few days ago
|
Quote|
|
|
|
|
Aug 19 2008, 07:36 PM
Return to original view | Post
#2
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
The temp is normal dont worry, my q6600 would reach 70c when primming with sp2004 x4.
 |
|
|
Aug 20 2008, 12:37 AM
Return to original view | Post
#3
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
QUOTE(syahirax @ Aug 19 2008, 07:17 PM) guys,just wondering,im using Q6600 B3,and i overclocked it to 3 ghz and the idle temp is 50 C/49C/48C/50C,and im using xigmatek HDT S1283,Dont you think the temp is a bit high?Ive lapped my hsf and proc anyway.  QUOTE(tkh_1001 @ Aug 19 2008, 07:30 PM) not sure... I think it makes sense, one of u have lapped and the other one non lapped.. so that explains the temperature diff.me using non-lapped s1283 and it can hit 6x degree c on priming at 3.5ghz in an aircond room Other factors might affect the results tho, but ur temp is still acceptable to me.  |
|
|
Aug 20 2008, 02:47 PM
Return to original view | Post
#4
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Did u lapped the proc evenly ?
|
|
|
Aug 20 2008, 04:52 PM
Return to original view | Post
#5
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Do you have the pic for both the proc and the hsf u lapped ?
|
|
|
Aug 22 2008, 06:18 PM
Return to original view | Post
#6
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
4ghz not enuf ka ?
|
|
|
|
|
|
Aug 22 2008, 07:06 PM
Return to original view | Post
#7
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
How about yours bro ? Crank up summore la..
 |
|
|
Aug 22 2008, 07:31 PM
Return to original view | Post
#8
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
lolwut
how much voltage u need to reach 4ghz ? |
|
|
Aug 22 2008, 08:35 PM
Return to original view | Post
#9
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Wah... how much is the load temp while stressing ?
|
|
|
Aug 28 2008, 12:25 PM
Return to original view | Post
#10
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Set ratio 1:1, ram timing to 5-5-5-15 and give some volts to it like 2.2v. Start with 400mhz and progress slowly. Please state here what voltage that you can adjust so that we can help u further.
|
|
|
Aug 28 2008, 01:26 PM
Return to original view | Post
#11
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Set la vcore higher bro.. 1.35v or 1.4v then vdimm put 2.2v, ratio put at 1:1 and start from 266mhz all the way up to 400mhz slowly.
|
|
|
Aug 28 2008, 02:15 PM
Return to original view | Post
#12
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Off EIST and C1E at your bios. Then try increase the vMch by 0.1v and try again.
|
|
|
Aug 28 2008, 02:37 PM
Return to original view | Post
#13
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Chipset voltage.
 Do some reading on how to overclock before proceeding. It seems that you still dont have the necessary info to start overclocking |
|
|
|
|
|
Aug 28 2008, 03:01 PM
Return to original view | Post
#14
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
http://forum.lowyat.net/index.php?act=ST&f...0#entry15451675
Read that, you can ask me which one you dont understand and i will explain it to you. We can try 1 by 1 and see if we can clock it higher.. |
|
|
Aug 28 2008, 04:07 PM
Return to original view | Post
#15
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Are sure no 1:1 ram ratio ?
|
|
|
Aug 28 2008, 06:42 PM
Return to original view | Post
#16
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
HT volt set auto
NB volt set auto SB volt set auto What is the actual voltage ? |
|
|
Aug 28 2008, 10:55 PM
Return to original view | Post
#17
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
QUOTE(syahirax @ Aug 28 2008, 10:25 PM) yeah,im pretty sure uzairi.By the way my temp right now is 51/50/50/50 idle and 65 when load.Running at Q6600 B3 at 3ghz(1.3300v) with sidepanel close.Any solution to lower down the temp? weird as mars is a nice mobo..QUOTE(subrok007 @ Aug 28 2008, 10:36 PM) my goodness...after i read some article. i set the HT, NB, SB voltage to 1.24v, 1.5v....i can boot in window but suddenly bsod..stated malfunction detected n sysytem halted.... LOL, just clear the cmos and do again.i reboot again n set to all auto (no oc) then my lan device cannot connect to internet..i using my lappy now....sienzzz....help.. |
|
|
Aug 28 2008, 11:29 PM
Return to original view | Post
#18
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Great to hear that, so what's the progress ?
|
|
|
Aug 29 2008, 04:47 PM
Return to original view | Post
#19
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Nice, now you can do some serious overclocking
|
|
|
Aug 29 2008, 06:29 PM
Return to original view | Post
#20
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
Nice
 Target 3.2ghz |
| Change to: |  0.0382sec
 0.39
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 12:12 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.